Intel SC5300AF2 - Server Platform - 0 MB RAM, Management Module Installation And User Manual

Intel® Management Module
Installation and User’s Guide
Document P/N C81751-002
Intel Corporation
This Intel Management Module Installation and User Guide as well as the software described in it is furnished under license and may only be used or copied in accordance with the terms of the license. The information in this manual is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by Intel Corporation. Intel Corporation assumes no responsibility or liability for any errors or inaccuracies that may appear in this document or any software that may be provided in association with this document.
Except as permitted by such license, no part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means without the express written consent of Intel Corporation.
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended for use in medical, life saving, life sustaining applications.
Intel may make changes to specifications and product descriptions at any time, without notice. The Intel® Server Board SE7520AF2, Intel® Server Board SE7520BD2, Intel® Server Board SE7520JR2, Intel®
Management Module—Professional Edition, and Intel® Management Module—Advanced Edition may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request.
Intel, Pentium, Itanium, and Celeron are registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
*
Other names and brands may be claimed as the property of others. Copyright © 2004, 2005 Intel Corporation. All rights reserved.
2 Intel® Management Module Installation and User’s Guide
Contents Introduction 5
Intel® Management Module Features.....................................................................................5
Getting the Latest Information and Support............................................................................6
Platform Compatibility and System Requirements..................................................................6
Installation Procedures 8
Before You Begin....................................................................................................................8
Location of Intel Management Module Header.......................................................................8
Installing the Intel Management Module—Professional Edition............................................11
Removing the Intel Management Module—Professional Edition..........................................12
Installing the Intel Management Module—Advanced Edition................................................13
Removing the Intel Management Module—Advanced Edition..............................................16
Intel Advanced Remote Server Control 17 Email Alerting 18 Embedded SNMP 19
Configuring SNMP ................................................................................................................19
Using the BMC-Resident SNMP Agent.................................................................................19
Embedded CLI (Telnet) 21
Configuring the Embedded CLI (Telnet) Feature..................................................................21
Using the Embedded CLI (Telnet) Feature...........................................................................21
Embedded Web Server 22
Configuring the Embedded Web Server ...............................................................................22
Using the Embedded Web Server.........................................................................................22
Appendix A: Command Line Interface Syntax 26 References 31 Glossary 32
Intel® Management Module Installation and User’s Guide 3
4 Intel® Management Module Installation and User’s Guide
Introduction
The Intel® Management Module is an upgrade to the National Semiconductor PC87431 mini-BMC
®
management controller on the Intel
®
Intel
Server Board SE7520JR2, and Intel® Server Board SE8500HW4. The Intel Management Module plugs into a connector on the server board. The Intel Management Module is available in two versions:
Professional Edition
Advanced Edition
Intel® Management Module Features
Professional Edition Features
The Professional Edition includes the following features:
All the features provided by the mBMC
Support for IPMI v2.0 specification
Additional sensors
Temperature-based fan speed control by the BMC
Additional FRU records are visible to the management controller and management software
applications (for example, Power Supply, DIMM, and hot-swap controller FRU’s).
The size of the System Event Log (SEL) is increased from 92 entries to 3276 entries
The number of BMC users is increased from one anonymous user to four users (each with
configurable user names and passwords on each LAN or Serial channel)
The IPMI 2.0 serial features are supported. The serial port can be used for console
redirection, Terminal-mode CLI, dial paging, Serial Over LAN (SOL), and other
management functions.
The Intelligent Chassis Management Bus (ICMB) is supported
PCI SMBus is accessible to the management controller. This allows PCI add-in cards that
support manageability to log events to the System Event Log (SEL).
BIOS logging of POST progress codes is added to the existing capability of logging only the
BIOS POST errors
Front panel functionality is enhanced (See: Secure Mode Button Actions in the platform
Technical Product Specification)
For systems with the SATA or SCSI hot-swap controller (HSC), the HSC sensors are visible
to server management software and HSC events are logged in the SEL.
Server Board SE7520AF2, Intel® Server Board SE7520BD2,
Intel® Management Module Installation and User’s Guide 5
Advanced Edition Features
The Advanced Edition adds all the features listed above for the Professional Edition, plus the following features:
rd
BMC-resident SNMP support for out-of-band access using 3
party applications such as
Hewlett-Packard* OpenView*
Embedded web server to access system health, view the SEL, and issue IPMI commands
Embedded Command Line Interface (using a Telnet server running on the BMC) to allow
direct terminal access to the BMC
Alerting via Email
®
Intel
Advanced Remote Server Control adds remote KVM functionality
High-speed access to a dedicated NIC for the BMC on the Advanced Edition module
The Intel Advanced Remote Server Control, email alerting, embedded CLI, embedded web, BMC-resident SNMP agent, SOL, and other firmware-resident features are available Out-of-Band (OOB). This means that these features are available even when the Operating System is not running or the AC power is off.
Getting the Latest Information and Support
The latest information on each server board and Intel software is available at:
http://support.intel.com/support/motherboards/server
Platform Compatibility and System Requirements
The Intel Management Modules are compatible with the following Intel server boards:
Intel Server Board SE7520AF2
Intel Server Board SE7520BD2
Intel Server Board SE7520JR2
Intel Server Board SE8500HW4
Table 1 on page 7 lists the minimum system requirements.
6 Intel® Management Module Installation and User’s Guide
Table 1. Minimum System Requirements
To use this feature…
Intel Advanced Remote Server Control
Embedded Web Server Intel Management Module Advanced Edition installed on the managed
Embedded CLI (Telnet Server)
Email Alerting Intel Management Module Advanced Edition installed on the managed
Serial Over LAN Intel Management Module Advanced Edition or Professional Edition
You will need…
ISM 8.20 Intel Advanced Remote Server Control component installed on the Administration Console
Intel Management Module Advanced Edition installed on the managed server
server Intel Management Module Advanced Edition installed on the managed
server
server
installed on the managed server
Intel® Management Module Installation and User’s Guide 7
Installation Procedures
Before You Begin
Read the “Warnings and Safety Cautions” section in the user’s guide for your server baseboard.
Location of Intel Management Module Header
The following illustrations show the location of the Intel Management Module header on the Intel Server Board SE7520AF2, Intel Server Board SE7520BD2, Intel Server Board SE7520JR2, and Intel Server Board SE8500HW4.
Figure 1. Location of Intel Management Module Connector on
8 Intel® Management Module Installation and User’s Guide
the Intel Server Board SE7520AF2
Figure 2. Location of Intel Management Module Connector on
the Intel Server Board SE7520BD2
Figure 3. Location of Intel Management Module Connector on
Intel® Management Module Installation and User’s Guide 9
the Intel Server Board SE7520JR2
Module Header
Figure 4. Location of Intel Management Module Connector on
the Intel Server Board SE8500HW4
10 Intel® Management Module Installation and User’s Guide
Loading...
+ 22 hidden pages