Updated Power Supply communication bus requirements.
Increased maximum supported memory to 128GB.
Added support for 5600 series processors.
04/21/2010
1.6
Updated12V SKU board picture (Figure 1).
07/18/2010
1.7
Removed Rapid Boot Toolkit section.
Updated NIC LEDs.
Updated video resolution.
03/21/2010
1.8
Updated typo in board feature set.
02/16/2012
1.9
Updated typo in board feature set.
Revision History
Revision 1.9
Intel order number E53971-008
Intel® Server Board S5500WB TPS Disclaimers
iii
Disclaimers
Information in this document is provided in connection with Intel® products. No license, express
or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel
assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to
sale and/or use of Intel products including liability or warranties relating to fitness for a particular
purpose, merchantability, or infringement of any patent, copyright or other intellectual property
right. Intel products are not intended for use in medical, life saving, or life sustaining
applications. Intel may make changes to specifications and product descriptions at any time,
without notice.
Designers must not rely on the absence or characteristics of any features or instructions
marked "reserved" or "undefined." Intel reserves these for future definition and shall have no
responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.
This document contains information on products in the design phase of development. Do not
finalize a design with this information. Revised information will be published when the product is
available. Verify with your local sales office that you have the latest datasheet before finalizing
a design.
This document may contain design defects or errors known as errata which may cause the
product to deviate from published specifications. Current characterized errata are available
on request.
This document and the software described in it are furnished under license and may only be
used or copied in accordance with the terms of the license. The information in this manual is
furnished for informational use only, is subject to change without notice, and should not be
construed as a commitment by Intel Corporation. Intel Corporation assumes no responsibility or
liability for any errors or inaccuracies that may appear in this document or any software that
may be provided in association with this document.
Except as permitted by such license, no part of this document may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means without the express written
consent of Intel Corporation.
The Intel® Server Board S5500WB is a dual socket server using the Intel® Xeon® Processor
5500 series and 5600 series processors, in combination with the IOH and ICH10R to provide a
balanced feature set between technology leadership and cost.
1.1 Section Outline
This document is divided into the following chapters:
Section 1 – Introduction
Section 2 – Server Board Overview
Section 3 – Functional Architecture
Section 4 – I/O Expansion Modules
Section 5 – Platform Management Features
Section 6 – Configuration Jumpers
Section 7 – Connector and Header Location and Pin-out
Section 8 – Intel® Light-Guided Diagnostics
Section 9 – Design and Environmental Specifications
Section 10 – Power Subsystem
Section 11 - Regulatory and Certification Information
Appendix A – POST Code LED Decoder
Appendix B – Video POST Code Errors
Glossary
Reference Documents
1.2 Server Board Use Disclaimer
Intel Corporation server boards contain a number of high-density VLSI and power delivery
components that need adequate airflow to cool. Intel ensures through its own chassis
development and testing that when Intel server building blocks are used together, the fully
integrated system will meet the intended thermal requirements of these components. It is the
responsibility of the system integrator who chooses not to use Intel developed server building
blocks to consult vendor datasheets and operating parameters to determine the amount of air
flow required for their specific application and environmental conditions. Intel Corporation
cannot be held responsible if components fail or the server board does not operate correctly
when used outside any of their published operating or non-operating limits.
Revision 1.9
Intel order number E53971-008
Server Board Overview Intel® Server Board S5500WB TPS
Feature
Description
Processors
Support for one or two Intel® Xeon® Processor 5500 and 5600 series processors in
FC-LGA 1366 Socket B package with up to 95 W Thermal Design Power (TDP)
DB-15 Video connectors
RJ-45 serial Port A connector
RJ-45 connector for 10/100/1000 LAN
One 2x USB 2.0 connectors
One RJ-45 over USB for 10/100/1000 LAN
Internal connections:
Two USB 2x5 pin header, supporting four USB 2.0 ports
One low-profile USB 2x5 pin
One DH-10 Serial Port B header
One 2x8 pin VGA header with presence detection to switch from rear I/O video
connector
Six SATA II connectors
Intel® I/O Expansion Module Dual Connectors
One RMM3 connector to support optional Intel® Remote Management Module 3
SATA SW RAID 5 Activation Key Connector
One SSI-EEB compliant front panel header
Power Connections
SSI SKU
One SSI-EEB compliant 24-pin main power connector (SSI only SKU)
One SSI compliant 8-pin CPU power connector
One SSI compliant 5-pin power control Connector (SSI only SKU)
12-V Only SKU
One 8-pin power connector
One 6-pin Aux power connector for 3.3 V and 5 V
One 7-pin power control connector
2. Server Board Overview
The Intel® Server Board S5500WB is a monolithic printed circuit board (PCB) with features
designed to support the Internet Portal Data Center markets. The following table provides a
high-level product feature list.
Table 1. Intel® Server Board S5500WB Feature Set
2 Revision 1.9
Intel order number E53971-008
Intel® Server Board S5500WB TPS Server Board Overview
3
Feature
Description
System Fan Support
Two 8-pin fan headers for double rotor memory fans and six 4-pin fan headers
supporting two processor zones and two memory zones in a redundant fashion
Add-in Adapter Support
One riser slot supporting both full-height and low-profile 1U and 2U MD2 PCI
Express* x16 riser cards PCI gen2 Express* x8 w/ x16 connector.
Two Intel® I/O Expansion Module card connectors supporting double- and singlewide I/O modules.
Video
Onboard ServerEngines* LLC Pilot II Controller
Matrox* G200 2D Video Graphics controller
Uses 8 MB of the BMC 32 MB DDR2 Memory
Hard Drive
Support for six ICH10R SATA II ports
Optional support for SW RAID 5 with activation key
LAN
Two 10/100/1000 ports provided by Intel® 82576 PHYs with Intel® I/O Acceleration
Technology 2 support
Server Management
Onboard ServerEngines* LLC Pilot II Controller.
Integrated Baseboard Management Controller (Integrated BMC), IPMI 2.0 compliant
Basic
BMC Controller: ARM 926E-S microcontroller
Super IO: Serial Port logic, legacy interfaces, LPC interface, Port80
Hardware Monitoring: Fan speed control and voltage monitoring
Advanced
Video and USB compression and redirection
NC-SI port, a high-speed sideband management interface
Integrated Super I/O on LPC interface
Revision 1.9
Intel order number E53971-008
Server Board Overview Intel® Server Board S5500WB TPS
2.1 Intel
®
Server Board S5500WB Server Board
The Intel® Server Board S5500WB has two board SKUs, such as SSI-compliant and 12-V-onlySKU. The board layouts of the SKUs are shown.
Figure 1. Intel® Server Board S5500WB 12V
4 Revision 1.9
Intel order number E53971-008
Intel® Server Board S5500WB TPS Server Board Overview
5
Figure 2. Intel Server Board S5500WB SSI
Revision 1.9
Intel order number E53971-008
Server Board Overview Intel® Server Board S5500WB TPS
2.2Server Board Connector and Component Layout
Figure 3. Intel® Server Board S5500WB Components (both SKUs are shown)
6 Revision 1.9
Intel order number E53971-008
Intel® Server Board S5500WB TPS Server Board Overview
7
Description
Description
A
Dual Intel® I/O Expansion Module
Connectors
V
Processor Socket 1
B
PCI Express x16 Gen2
W
8 Pin CPU Connector
C
Remote Management Module 3
X
Processor Socket 2
D
POST Code LEDs
Y
4-pin Fan Connector (CPU2)
E
External I/O
Z
4-pin Fan Connector (CPU2A)
F
USB Connector
AA
4-pin Fan Connector (MEM2)
G
Battery
BB
8-pin Fan Connector (MEM2R)
H
SATA Connectors
CC
DIMM Slot D2
I
24 Pin Connector (SSI only)
DD
DIMM Slot D1
J
8 Pin Connector (12V only)
EE
DIMM Slot E1
K
Aux Power (5-pin or 7-pin)
FF
DIMM Slot F1
L
RAID Key
GG
Front Panel Connector
M
DIMM Slot C1
HH
HDD LED Header
N
DIMM Slot B1
II
Low-Profile USB Connector
O
DIMM Slot A1
JJ
Internal VGA Connector
P
DIMM Slot A2
KK
BMC Power Cycle Header (12V Only)
Q
8-pin Fan Connector (MEM1R)
LL
USB Connector
R
4-pin Fan Connector (MEM1)
MM
Slot 1 PCI Express x8 Gen2
S
4-pin Fan Connector (CPU1A)
NN
SGPIO Connector
T
4-pin Fan Connector (CPU1)
OO
IMPB Connector
U
HDD Power Connector (12V only)
PP
Serial Port B
Table 2. Intel® Server Board S5500WB System Interconnects
Revision 1.9
Intel order number E53971-008
Server Board Overview Intel® Server Board S5500WB TPS
Description
Description
A
ID LED
E
RJ-45 GbE LAN connector
B
Status LED
F
RJ-45 Serial port connector
C
RJ-45 GbE/Dual USB connector
G
DB15 Video
D
Dual USB connector
H
Diagnostic LEDs
2.2.1 Board Rear Connector Placement
The Intel® Server Board S5500WB has the following board rear connector placement:
Figure 4. Rear Panel Connector Placement:
2.2.2Server Board Mechanical Drawings
The following figures are mechanical drawings for the Intel® Server Board S5500WB.
8 Revision 1.9
Intel order number E53971-008
Intel® Server Board S5500WB TPS Server Board Overview
9
Figure 5. Baseboard and Mounting holes
Revision 1.9
Intel order number E53971-008
Server Board Overview Intel® Server Board S5500WB TPS
Figure 6. Connector Locations
10 Revision 1.9
Intel order number E53971-008
Intel® Server Board S5500WB TPS Server Board Overview
11
Figure 7. Primary Side Height Restrictions
Revision 1.9
Intel order number E53971-008
Server Board Overview Intel® Server Board S5500WB TPS
Figure 8. Secondary Side Height Restrictions
12 Revision 1.9
Intel order number E53971-008
Intel® Server Board S5500WB TPS Functional Architecture
One (1) 4-port SAS module on IOM
connector (optional)
One (1) 4-port SAS module on IOM
connector (optional)
I/O Module
Yes, single- and double-wide
Yes, single- and double-wide
SW RAID
LSI SW RAID 0,1,5,10
LSI SW RAID 0,1,5,10
Processor Support
95 W, optimized for 80 W
95 W, optimized for 80 W
Video
Integrated in BMC
Integrated in BMC
ISM
iBMC w/ IPMI 2.0 support
iBMC w/ IPMI 2.0 support
Chassis*
Reference
Reference
Power Supply
12 V and 5 VS/B PMBus*
12 V, 5 V, 3.3 V, 5 VSB, PMBus*
3. Functional Architecture
The Intel® Server Board S5500WB is a purpose build, power-optimized server used in a 1U
rack. Memory and processor socket placement is made to minimize the amount of fan power
required to cool these components. Voltage Regulators (VRDs) are optimized for a particular
range of memory and CPU power that suits the target Internet Portal Datacenter (IPDC)
segment of the market. The VRDs are also designed to be highly power-efficient, balancing the
needs of being small in size and also cost-effective. There are two SKUs: a 12-V only SKU and
an SSI-compliant SKU.
3.1High Level Product Features
Table 3. Intel® Server Board S5500WB Features
Note:
*Referenced Chassis: Chenbro RM13204 Chassis and Intel® Server System SR1690WB.
Revision 1.9
Intel order number E53971-008
Functional Architecture Intel® Server Board S5500WB TPS
3.2Functional Block Diagram
Figure 9. Intel® Server Board S5500WB Functional Block Diagram
14 Revision 1.9
Intel order number E53971-008
Intel® Server Board S5500WB TPS Functional Architecture
15
3.3 Processor Subsystem
The Intel
®
5500 series and the next generation Intel
following key technologies:
Intel
®
Integrated Memory Controller
Point-to-point link interface based on the Intel
which was formerly known as the Common System Interface (CSI).
The Intel
®
5500 series processor is a multi-core processor based on the 45 nm process
technology. Processor features vary by SKU and include up to two Intel
capable of up to 6.4 GT/s, up to 8 MB of shared cache, and an integrated memory controller.
The Intel
®
5600 series processor is the next generation of multi-core processors based on the
32 nm process technology. Processor features vary by SKU and include up to 6 cores and up to
12 MB of shared cache.
3.3.1 Processor Support
The Intel® Server Board S5500WB supports the following processors:
®
5600 series processors support the
®
QuickPath Interconnect (Intel® QPI),
®
QPI point-to-point links
One or two Intel® 5500 series or 5600 series processor(s) in FC-LGA 1366 socket B
package with 4.8 GT/s, 5.86 GT/s, or 6.4 GT/s Intel® QPI.
Up to 95 W Thermal Design Power (TDP).
Supports Low Voltage (LV) processors.
3.3.2 Processor Population Rules
For optimum performance, when two processors are installed, both must be the identical
revision and have the same core voltage and Intel
is installed, it must be in the socket labeled CPU1. The other socket must be empty. You must
populate processors in sequential order. Therefore, you must populate processor socket 1
(CPU1) before processor socket 2 (CPU2).
When a single processor is installed, no terminator is required in the second processor socket.
3.3.2.1 Mixed Processor Configurations
The following table describes mixed processor conditions and recommended actions for all
Intel® server boards and systems that use the Intel® 5500 Chipset. The errors fall into one of the
following two categories:
Fatal: If the system can boot, it goes directly to the error manager, regardless of
whether the Post Error Pause setup option is enabled or disabled.
®
QPI/core speed. When only one processor
Major: If the Post Error Pause setup option is enabled, the system goes directly to
the error manager. Otherwise, the system continues to boot and no prompt is given
for the error. The error is logged to the error manager.
Revision 1.9
Intel order number E53971-008
Functional Architecture Intel® Server Board S5500WB TPS
Error
Severity
System Action
Processor family not
identical
Fatal
The BIOS detects the error condition and responds as follows:
Logs the error into the system event log (SEL).
Alerts the Integrated BMC of the configuration error with an
IPMI command.
Does not disable the processor.
Displays ―0194: Processor family mismatch detected‖
message in the error manager.
Halts the system.
Processor cache not
identical
Fatal
The BIOS detects the error condition and responds as follows:
Logs the error into the SEL.
Alerts the Integrated BMC of the configuration error with an
IPMI command.
Does not disable the processor.
Displays ―0192: Cache size mismatch detected‖ message
in the error manager.
Halts the system.
Processor frequency (speed)
not identical
Major
The BIOS detects the error condition and responds as follows:
Adjusts all processor frequencies to the lowest common
denominator.
Continues to boot the system successfully.
If the frequencies for all processors cannot be adjusted to be the
same, then the BIOS:
Logs the error into the SEL.
Displays ―0197: Processor speeds mismatched‖ message
in the error manager.
Halts the system.
Processor microcode
missing
Minor
The BIOS detects the error condition and responds as follows:
Logs the error into the SEL.
Does not disable the processor.
Displays ―816x: Processor 0x unable to apply microcode
update‖ message in the error manager.
The system continues to boot in a degraded state,
regardless of the setting of POST Error Pause in the
Setup.
Processor Intel® QuickPath
Interconnect speeds not
identical
Halt
The BIOS detects the error condition and responds as follows:
Adjusts all processor interconnect frequencies to lowest
common denominator.
Logs the error into the SEL.
Alerts the Integrated BMC about the configuration error.
Does not disable the processor.
Displays ―0195: Processor 0x Intel(R) QPI speed
mismatch‖ message in the Error Manager.
If POST Error Pause is disabled in the Setup, continues to
boot in a degraded state.
If POST Error Pause is enabled in the Setup, pauses the
system, but can continue to boot if operator directs.
Table 4. Mixed Processor Configurations
16 Revision 1.9
Intel order number E53971-008
Loading...
+ 87 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.