Intel® Ethernet MicroServer Switch
Module FM5224 Installation/User Guide
Networking Division (ND)
Revision 1.0
November 2014
Legal
No license (express or implied, by estoppel or otherwise) to any intellectual property rights is granted by this document.
Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for
a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or
usage in trade.
This document contains information on products, services and/or processes in development. All information provided here is subject
to change without notice. Contact your Intel representative to obtain the latest forecast, schedule, specifications and roadmaps.
The products and services described may contain defects or errors which may cause deviations from published specifications.
Copies of documents which have an order number and are referenced in this document may be obtained by calling 1-800-548-4725
or by visiting www.intel.com/design/literature.htm.
Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or other countries.
* Other names and brands may be claimed as the property of others.
© 2014 Intel Corporation.
Revisions
Date Revision Description
November 2014 1.0 Initial Release
2
Installing the Intel Ethernet
MicroServer Module FM5224
1. Open the module retaining lever by sliding the plastic handle and then pull it open.
2. Press the module into the appropriate opening until it is fully seated.
3. Return the handle to the locked position.
Instalación del módulo MicroServer
®
Ethernet Intel
1. Abra la palanca de retención del módulo deslizando el asa de plástico y tirando de
ella
2. Introduzca el módulo en la abertura correspondiente presionándolo hasta que
encaje completamente en su lugar.
3. Vuelva a colocar el asa en la posición de bloqueado.
FM5224
Installer le module MicroServer
®
Ethernet Intel
Ouvrez le levier de retenue du module en faisant glisser la poignée en plastique et en tirant pour
1.
l'ouvrir.
2. Enfoncez le module dans le logement approprié jusqu'à ce qu'il soit bien en place.
3. Replacez la poignée en position verrouillée.
FM5224
Installation des Intel® Ethernet MicroServer-
Moduls FM5224
1. Öffnen Sie den Modulfixierhebel, indem Sie den Kunststoffhebel verschieben und
anschließend öffnen.
2. Drücken Sie das Modul in die entsprechende Öffnung, bis es festsitzt.
3. Bringen Sie den Hebel zurück in die Sperrposition.
Installare Intel
®
Ethernet
MicroServer Module FM5224
1. Aprire la leva di ritenzione del modulo facendo scorrere la maniglia di plastica e tirandola.
2. Inserire il modulo nell'apertura appropriata e premere fino ad alloggiarlo completamente.
3. Riportare la maniglia nella posizione di blocco.
3
®
Instalação da Ethernet Intel
Módulo do Microsservidor FM5224
1. Abra a alavanca de retenção do módulo, deslizando a alça de plástico e puxando-a.
2. Pressione o módulo para a abertura pertinente até que ele fique totalmente assentado.
3. Recoloque a alça na posição travada.
4
®
®
安裝 Intel
Ethernet
MicroServer 模組 FM5224
1. 滑動塑膠把手，然後將把手拉開，這樣就可以打開模組的把手擋。
2. 把模組壓入適當的開口處，直到完全卡入為止。
3. 讓把手回到鎖定的位置。
인텔 이더넷 설치
MicroServer
모듈
FM5224
1. 플라스틱 핸들을 민 후 열릴 때까지 당겨 모듈 고정 레버를 엽니다.
2. 모듈이 완전히 안착될 때까지 해당 구멍으로 누릅니다.
Removing the Intel® Ethernet
MicroServer Module FM5224
3. 핸들을 잠긴 위치로 되돌려 놓습니다.
1. Unlock the handle.
2. Gently pull the module out of its slot.
3. Close the module retaining lever.
5
Extracción del módulo
®
MicroServer Ethernet Intel
1. Desbloquee el asa.
2. Saque el módulo de su ranura tirando suavemente de él.
3. Cierre la palanca de retención del módulo.
FM5224
Retirer le module MicroServer
Ethernet Intel
1. Déverrouillez la poignée.
2. Retirez soigneusement le module de son logement en tirant dessus.
3. Fermez le levier de retenue du module.
Entfernen des Intel
®
FM5224
®
Ethernet
MicroServer- Modus FM5224
1. Entriegeln Sie den Hebel.
2. Ziehen Sie das Modul vorsichtig aus dem Einschub.
3. Schließen Sie den Modulfixierhebel.
Rimuovere Intel® Ethernet MicroServer
Module FM5224
1. Sbloccare la maniglia.
2. Estrarre delicatamente il modulo dallo slot.
3. Chiudere la leva di ritenzione del modulo.
6
Remova a Ethernet Intel
Microsservidor FM5224
1. Destrave a alça.
2. Puxe suavemente o módulo para fora de seu compartimento.
3. Feche a alavanca de retenção do módulo.
®
Módulo do
インテル
®
イーサネット・マイクロサーバー・モジュー
ル FM5224 の取り付け
1. ハンドルのロックを解除します。
2. モジュールをスロットからそっと引き出します。
3. モジュールの保持レバーを閉じます。
7
®
®
移除 Intel
Ethernet
MicroServer 模組 FM5224
1. 解開把手
2. 輕輕的將模組拔出插槽。
3. 把模組的把手擋關上。
인텔 이더넷 제거
MicroServer
1. 핸들 잠금을 해제합니다.
2. 모듈을 슬롯에서 살짝 당겨서 빼냅니다.
3. 모듈 고정 레버를 닫습니다.
모듈 FM5224
Installing the Software
®
Contact your Intel
field representative for installation details.
8
Instalación del software
Póngase en contacto con el representante de Intel® de su localidad para conocer los detalles de la
instalación.
Installer le logiciel
Contactez votre représentant Intel local pour obtenir les détails d'installation.
Vorschriften: Angaben zur Einhaltung
Die folgenden Richtlinien beziehen sich auf das Intel Ethernet-MicroServer-Modul FM5224 (Modell
MBM.GEM.001).
Installare il Software
Contattare il rappresentante locale di Intel® field per informazioni sull'installazione.
Instalação do software
Entre em contato com o representante externo da Intel para obter detalhes da instalação.
9
Regulatory Compliance Stateme nt s
The following compliance standards apply to the Intel® Ethernet MicroServer Module FM5224 (model
MBM.GEM.001).
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Replace only with the same
or equivalent type recommended by the manufacturer. Dispose of used batteries
according to the instructions.
ATTENTION: Risque d’explosion si la batterie est remplacée par un type incorrect.
Remplacez-la uniquement avec le même type ou équivalent recommandé
par le fabricant. Jetez les piles usagées selon les instructions.
WARNING: The following applies only to products sold or distributed in California, USA.
Perchlorate Material—special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
Safety Compliance
•
UL 60950-1 Second Edition
•
CAN/CSA-C22.2 No 60950-1-07 Second Edition
• EN 60950-1:2006/A11:2009/A1:2010/A12:2011 (European Union)
•
IEC 60950-1:2005 Second Edition; Am1:2009 (International)
•
EU LVD Directive 2006/95/EC
EMC Compliance
•
FCC Part 15—Radiated & Conducted Emissions (USA)
•
ICES-3 (A)/NMB-3 (A)—Radiated & Conducted Emissions (Canada)
•
CISPR 22:2008—Radiated & Conducted Emissions (International)
•
EN55022: 2010—Radiatep & Conducted Emissions (European Union)
•
EN55024: 2010—Immunity (European Union)
•
CSPR 2010
•
EMC Directive 2004/108/EC
1
•
VCCI—Radiated & Conducted Emissions (Japan)
•
AS/NZS CISPR 22—Radiated & Conducted Emissions (Australia/New Zealand)
RoHS/WEEE Compliance
The equipment is labeled in compliance with Council
Directives 2002/96/EC (WEEE) and 2011/65/EU—RoHS.
Regulatory Compliance Markings
When required, these products are provided with the following Product Certification Markings:
•
UL Recognition Mark for USA and Canada
•
CE Mark
•
FCC markings
•
VCCI marking
•
Australian C-Tick Mark
•
People’s Republic of China “EFUP” mark
FCC Class A User Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
CAUTION: If the device is changed or modified without permission from Intel, the user may void his or
her authority to operate the equipment.
11
Canadian Compliance (Industry Canada)
CANADA—ICES 3(A) NMB 3(A)
Manufacturer’s Declaration, European Community
Manufacturer’s Declaration
Intel Corporation declares that the equipment described in this document is in conformance with the
requirements of the European Council Directive listed below:
Low Voltage Directive 2006/95/EC
EMC Directive 2004/108/EC
This declaration is based upon compliance of the product to the following standards:
EN 55022:2010 (CISPR 22 Class A) RF Emissions Control
EN 55024:2010 (CISPR 24) Immunity to Electromagnetic Disturbance
60950-1:2006 +A11:2009 Information Technology Equipment—Safety-Part 1: General
EN
Requirements
Warning: The following applies only to products sold or distributed in California, USA:
Perchlorate Material—special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
Responsible Party Intel Corporation, Mailstop JF3-446 5200 N.E. Elam Young Parkway Hillsboro, OR 97124-6497 1-800-628-8686
VCCI Class A Statements
BSMI Class A Statement
10
China RoHS Declaration
KCC Notice Class A (Republic of Korea Only)
11
End-of-Life/Product Recycling
Product recycling and end-of-life take-back systems and requirements vary by country.
Contact the retailer or distributor of this product for information about product recycling and/or take-
back.
12
Loading...