DUO CRISPTM + AIR FRYER
Multi-Use Pressure Cooker & Air Fryer
Welcome
Initial Setup
Product Overview
Getting Started
Venting Methods
Initial Test Run
(Water Test)
Air Frying
More Controls & Smart
Programs
Contact Information
Getting Started Guide
Full Manual, How-to Videos and Recipes available online at instantpot.com.au
Register your product today at instantpot.com.au/support/register
Welcome to the world of Instant cooking.
Thank you for welcoming us into your kitchen.
Having families ourselves, we developed the Instant
Pot® DuoCrisp
professionals alike to cook healthy, delicious meals more
easily and in less time.
We have partnered with chefs, authors and bloggers to
compile a collection of recipes that we hope you enjoy!
Happy cooking,
Robert J. Wang
Founder & Chief Innovation Ofcer
™
+ Air Fryer to allow busy families and
Download the Instant Pot App
• 1000+ Recipes
• New User Tips
• Getting Started Videos
2
|
Welcome
Initial Setup
• Read all “Important Safeguards” in the included Safety,
Maintenance & Warranty guide before use. Failure to do
so may result in property damage and/or personal injury.
• Use the Duo Crisp pressure cooker lid or the Duo Crisp
air fryer lid with the Duo Crisp cooker base. Using any
other lids may cause injury and/or damage.
• Remove all packaging material from in and around the
appliance and verify that all parts are accounted for.
• Place the cooker base on a stable, level surface, away from
externalheat sources.
• Follow “Care, Cleaning & Storage” instructions in the included
Safety, Maintenance & Warranty guide to wash the appliance before cooking.
• Do not remove safety warning stickers from lids, nor the serial number or rating
label from the cooker base.
CAUTION
Never use the cooker on a stovetop. Do not place appliance on or in close proximity to
a hot gas or electric burner, or a heated oven; heat from an external source will
damage appliance. Leave at least 13 cm of space around the Air Fryer Lid, and do not block the air
vents. Failure to do so may lead to injury and damage.
Initial Setup
|
3
Product Overview
Product Overview
Top of Pressure
Cooking Lid
Bottom of Pressure
Cooking Lid
Steam Release Valve
Float Valve
Quick Release Button
Lid Fins
Handle
Lid Position Marker
Locking Pin
Float Valve Silicone Cap
Anti-Block Shield
Steam Release Pipe
(beneath Anti-Block Shield)
Sealing Ring Rack
Sealing Ring
Inner
Pot
Cooker
Base
Inner Pot
Power & Sensor
Connector
Condensation Rim
Outer Pot
Cooker Handles
Heating Element
Control Panel
Base Power Socket
(Rear)
Illustrations in this document are for reference only and may differ from the actual product. Always refer
to the actual product. See Safety, Maintenance & Warranty for Care, Cleaning & Storage instructions.
Getting Started
|
5
Air Fryer Lid
Accessories
Back
Interior
Handle
Lid Fins
Air Intake
Air Vent
Element Cover
Heating Element
(Beneath
Element Cover)
Power & Sensor
Connector
Broil/Dehydrating Tray
Multi-Level Air
Fry Basket
Air Fryer Basket Base
Protective Pad &
Storage Cover
Multi-functional Rack
For full instructions on using accessories, view
the full manual at instantpot.com.au
Illustrations in this document are for reference
only and may differ from the actual product.
Always refer to the actual product.
|
6
Getting Started
Pressure Cooker Lid
When using the Pressure Cooker Lid, you will
only be able to use the Programs associated
with that lid, which include Pressure Cook, Sauté,
Slow Cook, Steam, Sous Vide, Delay Start & Keep
Warm. If you press an Air Fryer Program, “Lid” will
appear on the display to indicate that you do not
have the correct lid for that program.
You may adjust the time and temperature
when using either lid.
Air Fryer Lid
When using the Air Fryer Lid, you will only
be able to use the Programs associated with
that lid, which include Air Fry, Roast, Bake,
Broil and Dehydrate. If you press a Pressure
Cooker Program, “Lid” will appear on the
display to indicate you do not have the
correct lid for that program.
Duo Crisp
+ Air Fryer
Getting Started
Duo Crisp
+ Air Fryer
|
7
Pressure Cooking
Using the Pressure Cooking Lid
1
Open and Close the Pressure Cooking Lid
When the cooker is plugged in, it plays a jingle when lid is (opened and) closed properly.
Open Close
Open
Close
Open: Grip handle and turn lid anti-clockwise
on lid is aligned with indicator on the
until
rim of cooker base. Lift lid up and off cooker base.
Note: Always check the pressure cooking lid for
damage prior to cooking.
WARNING
While oat valve is up, contents of cooker are pressurised. Do not attempt to remove lid.
Refer to “Venting Methods” section in this guide for information on releasing pressure.
Failure to comply with this instruction could cause injuries or property damage.
Close: Grip handle and align the
indicator on rim of cooker base. Lower lid
into track then turn lid clockwise until
lid lines up with
indicator on cooker base.
Note: The cooker will not operate without the
lid properly in place. Ensure the lid is fully closed
before attempting to operate the cooker.
OpenClose
on lid with
on the
See Safety, Maintenance & Warranty for Care, Cleaning & Storage instructions.
Pressure Cooking
|
9
2
Check the Sealing Ring & Sealing Ring Rack
Remove: Pull sealing ring out from behind sealing ringrack.
Inspect sealing ring rack. It should be centred in the lid
and an even height all the way around.
Sealing ring must be installed before use.
See Safety, Maintenance & Warranty for Care, Cleaning &
Storage instructions.
To check or clean the following parts in Steps 2–7, please
make sure unit is unplugged and cool before performing
any of these tasks.
CAUTION
Always check for cuts or deformations in sealing ring prior
to cooking. Only use authorised Instant Pot
®
sealing
rings. Sealing rings may stretch over time. Do not use a stretched or
damaged sealing ring. If stretching occurs, replace sealing ring. Failure
to follow these instructions may cause food to discharge, which may lead
to personal injury or property damage.
See Safety, Maintenance & Warranty for Care, Cleaning & Storage instructions.
10|Pressure Cooking
Remove
Install
Incorrect
3
Remove & Install Float Valve
The oat valve has 2 positions. It pops up to indicate
when the cooker is pressurised and lowers into the
lid when the cooker isdepressurised.
Remove: Place one nger on the at top of the
oat valve. Turn lid over. Detach silicone cap from
the bottom side of the oat valve. Remove oat
valve from top oflid. Do not discard oat valve or
siliconecap.
The oat valve and silicone cap must be installed
before use to seal in pressurised steam.
Install: Drop oat valve into oat valve hole on top
of lid. Place one nger on the at top of oat valve.
Turn lid over. Attach silicone cap to bottom of oat
valve. Refer to “Venting Methods” in this guide for
information on releasing pressure.
Pressurised
Top
Depressurised
Bottom
WARNING
While oat valve is up, contents of cooker are pressurised. Do not attempt to remove
lid. Refer to “Venting Methods” section in this guide for information on releasing pressure.
Failure to comply with this instruction could cause injuries or property damage.
See Safety, Maintenance & Warranty for Care, Cleaning & Storage instructions.
Pressure Cooking
|
11
Loading...