Insignia NS-SB212 User Manual

Quick Setup Guide
Soundbar Home Theater Speaker NS-SB212
Congratulations on your purchase of an Insignia Soundbar Home Theater Speaker System. Your NS-SB212 represents the state of the art in home theater soundbars and is designed for reliable and trouble­free performance. See your User Guide for more information on your Soundbar Home Theater Speaker.
• Soundbar
• AC adapter
• RCA audio cable
• 3.5 mm audio cable
• Mounting template
• Remote control
User Guide
Quick Setup Guide
Features
Top view Back view
Standby indicator
Remote control
(Power) button
Power indicator
(Power) button
(Input) button
DSP buttons
(Input) button
DSP
DSP
button
Sound eld
indicator
sweNretaehTdradnatSybdnatS
BASS button
BASS
BASS button
VOL +/– buttons
VOL
VOL +/– buttons
BASS indicator
Using the remote control
1 Remove the plastic tab from the battery compartment before using the
remote control for the rst time.
2 Point the remote control directly at the IR sensor on the front of the
soundbar. You must be within approximately 23 ft. (7 m) of the soundbar.
(Mute) button
SUBWOOFER
OUT jack
DC IN jack
SUBWOOFER OUT
Hanging brackets
RCA IN
(R and L) jacks
DC IN
15.5V
AUX IN jack
AUX IN
L
R
RCA IN
OPTICAL IN
OPTICAL IN jack
Setting up your soundbar
Mounting the soundbar
Note: You must use suitable wall anchors if you are mounting on drywall, concrete, or other wall types.
You can also set the soundbar on a at surface.
To mount your soundbar on a wall: 1 Select a location close to your TV and directly in front of the
viewing/listening position. For best sound quality, choose a location where sound waves are not blocked by furniture or other obstacles.
2 Tape the supplied wall mount template card to the wall temporarily.
The template shows you where to locate the two screw holes.
3 Drill two holes on the wall where the template indicates. The screws
should protrude from the wall approximately 1/4 in. (6-8 mm).
4 Secure two screws (not included) to the wall in the holes you just
drilled. The screws must protrude from the wall by about 1/4”. The screw width must about 3/16” and the screw head about 1/4" to 3/8".
Warning: Improper installation can result in serious injury or damage to your soundbar. If necessary, seek the assistance of a professional.
Cautions:
• You must use suitable wall anchors if you are mounting on drywall, concrete, or other wall types.
• If the soundbar is not mounted securely, there is a possibility that it could fall.
IR sensor
16 in. (406 mm)
Approximately
¼ in. (6-8 mm)
Wall
5 Align the speaker hanging brackets with the screws, then hang the
soundbar on the screws.
Connections
Choose the connection options below that t your needs. Caution: Turn o or unplug all components while you are making
connections.
RCA Audio connections
For an RCA audio connection, make the following connections with the
included RCA cable.
OUTPUT
AUDIO
RCA cable
(provided)
AUX IN connections
For connecting auxiliary devices, make the following connections with the included 3.5mm audio cable.
TV, CD, MD, MP3 player,
smartphone, etc.
OUTPUT
AUDIO
Digital connections
For a digital connection, make the following connections (cable not
included).
Note: If you use the OPTICAL IN connection, change the device’s audio output to ‘PCM’ format. Refer to the documentation you received with the output device for additional information.
Back panel of the soundbar
SUBWOOFER OUT
DC IN
15.5V
Subwoofer connection
If connecting a subwoofer, make the following connections (cable not included). Note: A subwoofer is optional.
TV, projector, or DVD/Blu-ray player
LR
L
R
DC IN
15.5V
RCA IN
SUBWOOFER OUT
DC IN
15.5V
SUBWOOFER OUT
Audio cable (3.5 mm connectors) (provided)
OUTPUT
DIGITAL OPTICAL
AUX IN
L
R
RCA IN
OPTICAL IN
AUX IN
OPTICAL IN
L
R
RCA IN
Back panel of the soundbar
Back panel of
AUX IN
the soundbar
OPTICAL IN
TV, projector, or DVD/Blu-ray player
Digital optical cable (not provided)
Connecting the AC adapter
Cautions:
• Make sure that the electrical outlet matches the AC adapter’s input requirements of 100-240 V, 50/60 Hz before connecting.
• Use only the AC adapter provided.
• Plug in the AC adapter only after all other connections have been made.
To connect the AC adapter: 1 Connect the AC adapter to the DC IN jack on the back of the soundbar. 2 Plug the other end of the AC adapter into a power outlet.
AUX IN
L
R
DC IN
15.5V
RCA IN
Using your soundbar
Listening to your soundbar: 1 Press the (Power) button to turn on your soundbar or remote control.
The power indicator turns green.
2 Press the button on the soundbar or the remote control repeatedly to
select the sound source you want.
3 Turn on the sound source component connected to your soundbar and
begin playback. The sound plays through your soundbar.
4 Adjust the volume on your soundbar or the audio component to a
comfortable level. Warning: Continuous use of high volume sound may permanently damage your hearing.
5 Press the (Power) button again to turn o your soundbar. The standby
indicator turns on.
Troubleshooting
For troubleshooting information, see your User Guide.
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.
FCC warning
Changes or modications not expressly approved by the party responsible for compliance with the FCC Rules could void the user’s authority to operate this equipment.
Canada ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003.
One-year limited warranty
Visit www.insigniaproducts.com for details.
Contact Insignia:
For customer service, call 1-877-467-4289 www.insigniaproducts.com
© 2012 BBY Solutions, Inc., Inc. All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners.
Subwoofer
speaker cable
(not provided)
SUBWOOFER OUT
DC IN
15.5V
AUX IN
L
R
RCA IN
OPTICAL IN
Back panel of the soundbar
Notes:
• Make sure that the soundbar and all components are connected correctly and securely.
ENGLISH 12-0161
Loading...