Insignia NS-PCS20-C User Manual
Quick Setup Guide I NS-PCS20/NS-PCS20-C
2.0 computer speakers
Congratulations on your purchase of a
high-quality Insignia product. Your
NS-PCS20 is designed for reliable and
trouble-free performance.
PACKAGE CONTENTS
• Stereo speakers (2)
• AC adapter
• Quick Setup Guide
FEATURES
SETTING UP YOUR SPEAKER SYSTEM
Positioning your speaker system
• Place the speakers on the opposite sides of the
device they are connected to and as far apart as
possible.
Connecting to a computer
1 Make sure that the computer and your speaker
system are turned o and unplugged from the
power outlet.
2 Plug the cable with the green plug on the right
speaker into the audio out jack on the computer
(this jack is usually green).
3 Plug the black plug from the AC adapter into the
back of the right speaker and the other end into a
wall outlet or power strip.
4 Turn on the computer and your speaker system.
Connecting to portable audio devices
1 Make sure the portable audio device and your
speaker system are turned o and unplugged.
2 Plug the green audio cable attached to the speaker
into your audio device.
Before using your new product, please read these
instructions to prevent any damage.
1 Power button
2 Headphone
output jack
3 Master volume
control
Press to turn on your speaker
system. Press again to turn o
your speaker system.
Connect your favorite
headphones to this jack. They
will mute the speaker system
automatically. The master
volume control can then be
used to turn up or down the
volume to your headphones.
Rotate clockwise to turn the
volume up or
counterclockwise to turn the
volume down.
3 Plug the black plug from the AC adapter into the
back of the right speaker and the other end into a
wall outlet or power strip.
4 Turn on the portable audio device and your
speaker system.
POWER SUPPLY SPECIFICATIONS
Input: AC 120V, 60Hz, 6.5W
Output: AC 7.5V, 350mA
TROUBLESHOOTING
Symptom
Speaker system
will not turn on
Speaker does not
produce sound
Sound is distorted
Sound is coming
from one speaker
Solution
• Press the power button on the right speaker. When your speaker system is
turned on, the power LED lights blue.
• Make sure that the power cord is connected to a power outlet.
• Test the power outlet to make sure that it is supplying power.
• Press the power button on the right speaker. When your speaker system is
turned on, the power LED lights blue.
• Make sure that the power cord is connected to a power outlet.
• Test the power outlet to make sure that it is supplying power.
• Make sure that you have connected the speakers correctly. For more information,
see “Setting up your speaker system” on page 1 of this Quick Setup Guide.
• Make sure that the sound is not muted or the volume is not set too low on the
audio device you connected to.
• Try connecting your speaker system to another audio device. If your speaker
system produces sound, the problem is with the audio device you connected to.
• Adjust the master volume control to the ¼ or ½ level.
• Adjust volume settings on the output device (computer or portable audio source).
• If your speaker system is connected to a computer, adjust your computer’s audio
levels to balance the sound coming from the speakers.
• Reseat the audio connector into the audio out jack of your computer.
LEGAL NOTICES
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC warning
Changes or modications not expressly approved by the party responsible for compliance with the FCC Rules
could void the user’s authority to operate this equipment.
Canada ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003.
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details
IMPORTANT SAFETY INFORMATION
1 Read, follow, and save all instructions and documentation.
2 Do not use this apparatus near water.
3 Clean only with a dry cloth.
4 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
5 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including ampliers) that produce heat.
6 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t
into your outlet, consult an electrician for replacement of the obsolete outlet.
7 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
8 Only use attachments/accessories specied by the manufacturer.
9 Unplug this apparatus during lightning storms or when unused for long periods of time.
10 Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in China
V5 ENGLISH 14-0484
Loading...