Insignia NS-PCHDEDS19 Quick Setup Guide

QUICK SETUP GUIDE
Dual Hard Drive Docking Station
NS-PCHDEDS19
PACKAGE CONTENTS
• Dual Hard Drive Docking Station
• Power adapter (12V/3A)
• USB 3.0 cable (USB 3.0 Type B to USB 3.0 Type A
Quick Setup Guide
Note: The USB 3.0 OUT port cannot be used to connect a computer.
SYSTEM REQUIREMENTS
Windows®7
Linux Kernal:
Linux 2.4.1 and later versions
Mac OS:
Mac OS X 10.6 and later versions
FEATURES
• Fashionable design provides remarkable performance
• Supports all 2.5" & 3.5" SATA I/II/III hard drives
• Maximum capacity of each bay is up to 8 TB
• Plug and play, no drivers needed
• Supports SATA and USB 3.0 transfer speed up to 5 Gbps
• LED indicator lets you check working status
• Supports MTT (Multiple Transaction Translator)
• Reads two discs (SSD and HDD) simultaneously.
Front view
Eject Buttons
Back panel view
HARD DRIVE DOCKING STATION
Hard Disk:
1 Insert an SSD or HDD into a slot on your docking
station. You can use both slots at the same time.
CAUTION: To avoid damaging the equipment,
make sure that the SSD/HDD is inserted in the correct direction.
2 Connect the USB cable to the USB 3.0 IN jack on the
docking station and to an available USB port on your computer.
3 Connect the power adapter to the DC IN jack on the
back of your docking station, then turn on your docking station and the computer. The docking station LED blinks until the computer identies your station, then the LED lights steady.
4 If this is the rst time you are using an SSD or HDD,
follow your computer's operating system instructions to format the disk.
5 Follow your computer's operating system
instructions to transfer data to or from your computer. The docking station LED blinks while data is transferring.
6 When the transfer is complete, turn o power to the
docking station by pressing the power switch. Press the eject button on the side of your docking station, then remove the SSD or HDD.
USB Devices:
You can use the USB 3.0 OUT port to connect USB
devices. This jack provides two-way transmission between the USB device and an HDD, an SSD, or a computer.
Before using your new product, please read these instructions to prevent any damage.
USB 3.0 OUT
USB 3.0 IN
Power adapter jack
Power Switch
SPECIFICATION:
Transmission Port: USB 3.0 Type B for computer. USB 3.0 Type A for other USB devices
Transmission Rate: 5 Gbps (MAX)
Work Temperature: 32°F ~ 122°F (0°C ~ 50°C)
Work Humidity: 20% RH~ 85% RH
Dimension: 6.0 × 5.3 × 2.7 in.
(152 × 134 × 68 mm)
LEGAL NOTICES
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
ICES-003
This Class B digital apparatus complies with Canadian ICES-003; Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richeld, MN 55423 U.S.A. ©2017 Best Buy. All rights reserved.
Made in China
V1 ENGLISH 17-0753
Loading...