Insignia NS-PCH5421, NS-PCH5421-C User Manual
Quick Setup Guide
NS-PCH5421/NS-PCH5421-C
4 Port USB 2.0 Hub
PACKAGE CONTENTS
• USB 2.0 4-Port Hub
• AC adapter 5V/2A
• USB cable
• Quick Setup Guide
SYSTEM REQUIREMENTS
• Computer with a USB 2.0 or USB3.0
port
• Latest version of Windows ®8,
Windows® 7, Windows Vista®, or
Windows® XP; or Mac OS X 10.4 or later
• Minimum free disk space: 600MB
recommended
FEATURES
• Complies with USB 2.0
• Compatible with USB 1.1 devices
• Supports transfer rates of up to
480Mbps
• Adds four USB 2.0 ports to your USB
2.0 enabled computer
• Blue LED power indicator
• Supports hot-swappable and Plug &
Play capability
• Supports over-current protection at
USB host port
Upstream port (to computer)
LED
Downstream ports (to devices)
DC jack
INSTALLING YOUR HUB
Note: When you connect your hub to a
computer, the computer detects your hub and
automatically installs the driver.
1 Connect the smaller end of the USB
cable to the upstream port on the rear of
the hub and connect the larger end of
the USB cable to an open USB port on
your computer.
Before using your new product, please read these
instructions to prevent any damage.
2 Plug the AC power adapter into your
hub’s DC jack and into a power outlet.
3 Connect your USB devices into your
hub.
Note: Do not disconnect from your computer
or USB device during data transfer. Doing so
may corrupt your data or damage your
devices.
LEGAL NOTICES
FCC Caution
Changes or modications not expressly
approved by the part responsible for
compliance could void the user’s authority to
operate the equipment.
FCC Statement
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment o and on, the user is encouraged
to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the
equipment and receiver.
—Connect the equipment into an outlet on a
circuit dierent from that to which the receiver
is connected.
—Consult the dealer or an experienced
radio/TV technician for help.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
ICES Statement
CAN ICES-3 (B)/NMB-3 (B)
ONE-YEAR LIMITED
WARRANTY
Visit www.insigniaproducts.com for
details.
CONTACT INSIGNIA:
For customer service, call 877-467-4289
(U.S. and Canada) or 01-800-926-3000
(Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated
companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in China
V1 ENGLISH 14-0366
Loading...