Insignia NS-MWPC1W, NS-MWPC1W-C Quick Setup Manual
Quick Setup Guide
Qi Wireless Charging Pad
|
NS-MWPC1W / NS-MWPC1W-C
PACKAGE CONTENTS
• Qi Wireless Charging Pad
• Micro USB charge/sync cable
• Power adapter
• Quick Setup Guide
COMPATIBILITY
Works with all Qi v1.1 and newer devices. This includes Samsung
devices such as the Note 5, S6 Edge+, S6 Edge, and S6.
Before using your new product, please read these instructions to prevent any damage.
PRODUCT OVERVIEW
Micro USB port
LED indicator
USING YOUR CHARGING PAD
1 Connect the micro USB charge/sync cable to the micro USB port
on your charging pad.
2 Plug the USB connector into the power adapter.
3 Connect the power adapter to the power outlet.
Power adapter
Micro USB charge/sync cable
4 Place your Qi-enabled device on the charging pad with the
screen facing up. The LED is blue when your device is
charging.
Note: If the LED is red, your device is not charging. See
“Troubleshooting” for more information.
LED indicator
LED INDICATOR STATUS
LED
Blue
Red (solid)
Red (blinking)
O
STATUS
Device is charging.
Device is not charging. See "Troubleshooting" for more information.
Device is not charging. The power adapter's input is less than 1.8A. Use
the power adapter that came with your charging pad.
Charging pad is not connected to power.
TROUBLESHOOTING
Device not charging/LED is red
• Make sure that your device is Qi-enabled.
• Make sure that your charging pad is connected to a working
power outlet.
• Make sure that you are using the power adapter that came with
this product.
• Make sure that your device is positioned correctly on your charging
pad.
• Make sure that there are no other objects on the charging pad.
• Remove your device’s case. It may be blocking the wireless signal.
Device charges slowly
• Your device may charge more slowly with the charging pad than a
charging cable. This is normal behavior.
• Make sure that you are using the power adapter that came with this
product.
• Make sure that your device is positioned correctly on your charging
pad.
SPECIFICATIONS
Qi Wireless Charging Pad:
• Input: 5V 1.8A
• Output: ≥5W
• Dimension: 3.4 × 3.1 × 0.5 in. (87 × 78 × 12 mm)
• Weight: 35±5 g
AC Power Adapters:
• Input: AC 100-240V, 50-60Hz, 0.35A MAX
• Output: DC 5V 2A
LEGAL NOTICES
FCC Information
FCC statement: This device complies with Part 18 of the FCC Rules.
(1) This device may cause electromagnetic interference, (2) This device shall be
operated according to the user manual, and shall be using the provided accessories
(e.g. power supply) only, (3) In case there is any electromagnetic interference
occurred, please place the device at least 20 cm from other electronic device, or
further away.
RSS-Gen statement:
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
SAFETY INFORMATION
1 Use only the power adapter that came with the product. Do not make
unauthorized changes to the power supply.
2 Do not attempt to disassemble the product. It may result in
short-circuit or damage.
3 The product should be kept in a dr y and ventilated environment. Do
not store it in an area of high humidity and high temperature.
4 Do not use organic solvent to clean the product.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call
U.S. and Canada (877-467-4289)
Mexico (01-800-926-3000)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Distributed by Best Buy Purchasing, LLC
©2015 Best Buy. All rights reserved. Made in China
V1 ENGLISH 15-0771
Loading...