QUICK SETUP GUIDE
10 W Qi
Dash Mount
NS-MWPC10DM / NS-MWPC10DM-C
FEATURES
• Suction cup with adhesive securely holds your phone to
a vehicle’s dashboard
• Ball socket joint provides a wide, 210° range of motion
that holds your phone vertically or horizontally
• Wireless design lets you charge your phone without
cumbersome cords
• Car charger includes an extra USB port to charge other
devices
• 10 W Qi-certied to work with most Qi-enabled
smartphone devices (from 2–3.8 in. (5–9.6 cm) wide),
including Apple and Samsung
SETTING UP YOUR MOUNT
Your mount can be attached to a dashboard or windshield.
Dashboard mount
Clean the surface to remove dust and other debris before
attaching the mount to it.
1 Unscrew the holder knob on the back of the
smartphone holder.
2 Place the smartphone holder over the dashboard
mount’s ball joint and tighten the holder knob to
secure.
3 Remove the plastic cover from the mount’s suction
cup.
Note: If the suction cup on the bottom of the mount loses
its adhesive, rinse it in warm water and let air dry.
4 Press the suction cup onto your dashboard or
window, then press the suction lever down to secure
the mount.
5 Connect the car charger to the micro USB port on the
bottom of the holder, then plug the other end into
your vehicle’s cigarette lighter. The LED lights green,
then fades until the LED turns o.
PACKAGE CONTENTS
• Qi smartphone holder
• Dashboard mount
• Vent mount
• Car charger
• Quick Setup Guide
COMPATIBILITY
Wirelessly charges most Qi-enabled smartphones
2–3.8 in. (5–9.6 cm) wide. Compatible models include
Samsung Galaxy Note 5, Note 7, Note FE, S6, S6
Edge+, S6 Active, S7, S7 Edge, S7 Active, S8, S8+, S8
Active, S9, S9+, S Lite, S10, S10+, S10e, iPhone 8,
iPhone 8 Plus, iPhone X, iPhone XS, iPhone XS Max,
iPhone XR and other Qi-enabled smartphones.
Note: Not all smartphones can receive a Wireless Fast
Charge. However, they will still receive a standard wireless
charge. Check your phone’s charging features to see if it has
Fast Charge capabilities.
PRODUCT OVERVIEW
Dashboard mount with smartphone holder
Holder
Clamps
Release button
Fast charging center
Foot
Micro USB port
Air vent mount with smartphone holder
Charging indicator
Telescopic knob
Suction lever
Holder release button
Holder knob
Pivot knob
Suction cup
Ball joint and holder knob
Holder knob
Ball joint
Air vent mount
Ball joint
Air vent release
Air vent clips
Air vent mount
1 Unscrew the holder knob on the back of the
smartphone holder.
2 Place the smartphone holder over the vent mount's
ball joint and tighten the holder knob to secure.
3 Press the air vent release to open the vent clips, align
the clips with your vent, then stop pressing the air
vent release to secure the vent mount.
4 Connect the car charger to the micro USB port on the
bottom of the holder, then plug the other end into
your vehicle’s cigarette lighter. The LED lights green,
then fades until the LED turns o.
Before using your new product, please read these instructions to prevent any damage.
USING YOUR DASH MOUNT
Mounting and charging your smartphone
1 Push or pull the smartphone holder’s foot to retract
or extend it to t your phone.
2 Press the release button on the side of the holder.
The clamps open.
3 Place your smartphone in the holder and squeeze
the clamps together tightly until your phone is
secure. Make sure that:
• Your phone is ush against the back of the holder.
• The center of your smartphone is the aligned with
the symbol on the holder.
4 Check the charging indicator to make sure that the
smartphone is receiving power. The LED should light
solid green. Your phone charges until the battery
reaches 100%, then stops.
Adjusting your mount’s position
Loosen the adjustment knob to reposition the mount,
then tighten the knob to secure the mount’s position.
Caution: Do not adjust the mount’s position while
driving or while the phone is in the holder.
• Telescopic knob: Extends the arm
Knob
• Pivot knob: Pivots the arm from side to side
Knob
• Holder knob: Rotates your phone
Knob
Removing your smartphone from the holder
1 Hold your smartphone and press the release button on
the side of the holder. The clamps open.
2 Remove your smartphone.
TROUBLESHOOTING
PROBLEM
Device not charging
LED is blinking red
Device charges
slowly
Mount won’t secure
to the dashboard
Mount won’t secure
to the dashboard
SOLUTION
• Make sure that your device is Qi-enabled.
• Make sure that your dash mount is connected to your vehicle’s
power port.
• Make sure that your smartphone is in the center of the holder
with the screen facing outward.
• Make sure that your smartphone’s case isn’t blocking the
wireless signal. Remove the case if it is.
• Turn on your vehicle.
• Wireless charging may not work if your phone has a thick case, if
your phone case is made out of certain materials (such as metal),
or an object (such as a phone grip) is attached to the back.
• The mount is too hot to charge. Remove your phone and let it
cool, then resume charging.
• Your smartphone is not compatible with the Qi wireless charger.
• Your smartphone may charge more slowly with the wireless
charger than a charging cable. This is normal behavior.
• Make sure that your smartphone is positioned in the center of
the holder.
• Clean the window or dashboard and let it air dry before
securing the mount.
• If the suction cup on the bottom of the mount loses its
adhesive, rinse it in warm water and let air dry.
Try using your dash mount in dierent locations.
SPECIFICATIONS
Dimensions (H × W × D): .8 × 2.5 × 4.1 in.
(20 × 63 × 103 mm)
Weight: .65 lb. (.3 kg)
Input: 5 V/2 A or 12 V/1.2 A
Output: 10 W maximum
Temperature range: 32°~104° F (0°~40° C)
Qi version: WPC 1.2.4
SAFETY INSTRUCTIONS
• Do not attempt to disassemble the product. It may
result in short-circuit or damage.
• The product should be kept in a dry and ventilated
environment. Do not store it in an area of high
humidity and high temperature.
• Do not use organic solvent to clean the product.
LEGAL NOTICES
FCC Statement
FCC Supplier’s Declaration of Conformity:
Brand name / model number: INSIGNIA / NS-MWPC10DM
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Suppliers Name: Best Buy Purchasing, LLC. Suppliers Address (USA): 7601 Penn
Ave South, Richeld, MN 55423 U.S.A. Suppliers phone number:
1-877-467-4289.
FCC Caution
Changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, maybe cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent form that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
RSS-Gen statement:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
RSS-102 Statement:
This equipment complies with Industry Canada radiation exposure limits set
forth for an uncontrolled environment.
Cet équipement est conforme à l'exposition aux rayonnements Industry
Canada limites établies pour un environnement non contrôlé.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
1-877-467-4289 (U.S. and Canada)
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2019 Best Buy. All rights reserved.
Made in China
V2 ENGLISH 19-0453