Insignia NS-HZ308, NS-HZ308-C User Manual
Quick Setup Guide
RF Modulator AV Signal Converter | NS-HZ308 / NS-HZ308-C
Thank you for purchasing this high-quality Insignia
RF Modulator. This product is designed to connect AV
components with no RF (coaxial) output, such as
Blu-ray/DVD players, gaming systems, etc., to an
older TV that has only an RF input.
Package contents
• RF Modulator
• Power adapter
• Quick Setup Guide
Required parts
The following items (not supplied) are required:
• One composite AV cable with three RCA
connectors (yellow, red, and white) at each end.
• One 75-ohm coaxial cable
Features
ANT IN
VIDEO IN
AUDIO IN
Before using your new product, please read these instructions to prevent any damage.
DC IN
CH 3/4
TO T V
Connecting your RF Modulator
1 Connect a composite AV cable (not included) from
the AV output jacks (yellow for video; red and white
for stereo audio) of the source component
(Blu-ray/DVD player, gaming system, etc.) to the
corresponding color-coded input jacks on the
RF Modulator.
Note: For mono AV components, use only the yellow and
white connectors of the composite AV cable.
2 Connect the coaxial cable to the TV using one of the
following methods that matches your setup:
• If you have an RF TV source, such as a cable/satellite
box or TV antenna, connected to the TV, disconnect
that component from the TV and connect the coaxial
cable to the ANT IN jack on the RF Modulator.
Connect a separate coaxial cable from the TO TV
jack on the RF Modulator to the RF input jack on the TV.
• If you do not have an RF TV source, connect a
coaxial cable from the TO TV jack on the
RF Modulator to the RF input jack on the TV.
Note: If your TV has only 300-ohm VHF screw terminals,
use a 75-ohm-to-300-ohm matching transformer to
complete the connection.
3 Connect the barrel plug on the included power
adapter to the DC IN jack on the RF Modulator, and
plug it into a standard 120V AC outlet.
Using your RF Modulator
1 Turn on the TV and set it to either Channel 3 or 4,
whichever is not used for regular broadcasts in your
area.
2 Set the RF Modulator’s CHANNEL 3/4 switch to the
same channel you set the TV (3 or 4).
3 Turn on the AV component that is connected to the
RF Modulator and use it following the
manufacturers instructions.
4 To view TV channels through a cable/satellite box or
antenna that is connected to the ANT IN jack on the
RF Modulator, power o the AV component that is
connected to the RCA inputs of the RF Modulator.
The internal A/B switch in the
RF Modulator will automatically switch over to the
ANT IN device.
Important safety instructions
CAUTION: Risk of electric shock. Do not open.
The lightning ash with arrowhead symbol inside a triangle is intended to alert you
to the presence of uninsulated dangerous voltage within your RF modulator’s
enclosure. This voltage may be strong enough to cause an electric shock.
The exclamation point inside a triangle is intended to alert you to important
operating and maintenance instructions.
• Read and follow these instructions.
• Retain these instructions for future reference.
• Follow all warnings.
• Do not use your RF modulator near water. Do not expose your RF modulator to dripping or
splashing liquids. Do not place objects lled with liquid, such as a vase, on top of your RF
modulator. Do not expose your RF modulator to rain.
• Clean your RF modulator with a dry cloth only.
• Do not block ventilation openings.
• Do not install near a heat source, such as a radiator, heat register, stove, or other heat
producing device (including an amplier).
• Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with
one blade wider than the other. The wide blade is a safety feature. If the plug does not t into
your electrical outlet, contact an electrician to relace the obsolete outlet.
• Do not walk on, set items on, or pinch the power cord, especially at the plug and the back of
your RF modulator.
• Unplug your RF modulator during lightning storms or when you do not intend to use your RF
modulator for an extended period of time.
• Use and store your RF modulator indoors only. Extreme temperatures and humid
environments can damage internal electronic components.
Legal notices
FCC Part 15
This device complies with Part 15 of FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Your modulator might cause TV or radio interference even when is operating properly. To
determine whether your modulator is causing the interference, turn it o. If the interference
goes away, your modulator is causing it.
Try to eliminate the interference by:
• Moving your RF Modulator away from the receiver.
• Connecting your RF Modulator to an outlet that is on a dierent electrical circuit from the
receiver.
• Contacting your local store for help.
If you cannot eliminate the interference, the FCC requires that you stop using your RF Modulator.
Changes or modications not expressly approved by the party responsible for compliance could
void the user’s FCC authorization to operate this equipment.
ICES-003
This Class B digital apparatus complies with Canadian ICES-003
One-year limited warranty
Visit www.insigniaproducts.com for details.
Contact Insignia:
For customer service, call 1-877-467-4289 (U.S. and
Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a registered trademark of BBY Solutions, Inc. Registered in some
countries.
Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richeld, MN
55423 U.S.A.
©2014 BBY Solutions, Inc. All Rights Reserved.
V2 ENGLISH 14-0096
Loading...