Insignia NS-HWMG1844 User Manual
USER GUIDE
Wood, Metal and Glass
TV Stand
for TVs up to 48” or 100 lbs.
NS-HWMG1844
SAFETY INFORMATION AND SPECIFICATIONS.........2
PACKAGE CONTENTS: PARTS..........................................3
PACKAGE CONTENTS: HARDWARE ..............................4
ASSEMBLY INSTRUCTIONS..............................................5
CARE AND MAINTENANCE .......................................... 12
Before using your new product, please read these instructions to prevent any damage.
NS-HWMG1844
Maximum top shelf weight: 100 lbs. (45.5 kg)
Maximum middle/bottom shelf weight:
50 lbs. (22.7 kg)
Maximum TV weight: 100 lbs. (45.5 kg)
Maximum screen size: 48” diag.
Overall dimensions (W × H × D):
44 × 22 × 20 in. (111.8 x 55.9 x 50.8 cm)
Shelf dimensions (W × D):
40.6 × 19.1 in. (103.2 × 48.6 cm)
TV stand weight: 58.2 lbs. (26.4 kg)
4
4
i
n
.
(
1
1
1
.
8
c
m
)
22 in.
(55.9 cm)
19.1 in.
(48.6 cm)
8.5 in.
(21.6 cm)
8.5 in.
(21.6 cm)
20 in.
(50.8 cm)
SAFETY INFORMATION AND SPECIFICATIONS
CAUTION: The top surface of this stand is
designed for use with a product weighing no
more than 100 lbs. (45.5 kg) and having a
width that permits it to sit evenly on the stand
each side of the shelf. Use with products that weigh more
than the maximum weight allowed, or with dimensions
that extend beyond the maximum width may result in
instability, which may result in injury.
with no more than a one-inch overhang on
CAUTION: This product contains small items
that could be a choking hazard if swallowed.
Keep these items away from young children!
2
www.insigniaproducts.com
Tools needed:
Phillips screwdriver
Rubber mallet
Wood drill bit
(3/16”)
Drill
1 Top shelf (Qty. 1)
2 Left leg (Qty. 1)
3 Right leg (Qty. 1)
4 Middle frame (Qty. 1)
5 Lower frame (Qty. 1)
6 Back panel (Qty. 1)
7 Glass shelves (Qty. 2)
TOP
PACKAGE CONTENTS: PARTS
Make sure that you have all the parts necessary to assemble your new TV stand.
Wood, Metal and Glass TV Stand
www.insigniaproducts.com
3
PACKAGE CONTENTS: HARDWARE
How Hardware Qty.
A
2
B12
C1
D1
E8
F12
G4
H1
I8
J8
Supports
Adhesive
glass support
Wood dowel
Allen wrench
Short Allen bolt
(6 x 15 x 10 mm)
Long Allen bolt
(6 x 25 x 10 mm)
Wood screw
(3.5 x 15 x 6 mm)
Glue
Spring washer
Flat washer
Label Hardware Qty.
WA 2
WB 2
WC 2
WD 4
WE 2
Short wood screw
(3.5 x 12 x 8 mm)
Long wood screw
(4 x 25 x 8 mm)
Wall anchor
Mounting bracket
Mounting strap
Make sure that you have all the hardware necessary to assemble your new TV stand.
NS-HWMG1844
10 20 30 40 50 60 70 80 90 1 00mm
4
1234in
www.insigniaproducts.com
ASSEMBLY INSTRUCTIONS
GL
U
E
A Supports
(Qty. 2)
C Wood dowel
(Qty. 1)
Glue
Rubber mallet
Step 1: Attach the supports and wood dowel
Tip: Assemble your stand on a carpeted floor or the empty TV stand box to avoid scratching it.
1 Screw the two supports (A) into the lower frame (#5).
2 Glue a wood dowel (C) into the end of the back panel (#6):
A Put one drop of glue (H) in the hole, then insert the wood dowel (C).
B Gently tap the wood dowel (C) into the hole with a rubber mallet to secure it in place.
Wood, Metal and Glass TV Stand
You’ll need:
www.insigniaproducts.com
5
Loading...