How it Works
Insignia
Loading...
NS-HWD1848
User Manual
29 pgs4.3 Mb0
Table of contents
Loading...

Insignia NS-HWD1848 User Manual

Download
TV Stand with Gaming Nook
NS-HWD1848
USERGUIDE
Before using your new product, please read these instructions to prevent any damage.
Contents
Package contents 3
Safety information 6
Specifications 8
Assembling your TV stand 9
Installing anti-tip hardware 24
Care and maintenance 25
One-Year Limited Warranty 26
2

Package contents

Parts
TV Stand with Gaming Nook
(A) Base
(E and F) Sides
(I)Small back panel
(B) Supports (2)
(G) Top
(J) Large shelf
(C and D) Divider panels
(H) Front edge
(K)Large back panel
(L)Small shelves (2)
(M) Small divider
(N) Door
3
NS-HWD1848
Hardware
Label Hardware Quantity
AA Shelf supports 8
BB Cam screws 30
CC Cam locks 30
DD 3 × 15 mm screws 36
EE 4 × 50 mm screws 5
FF 8 × 30 mm wood dowels 41
GG Handle (with screws) 2
HH Right pin hinge 1
II Left pin hinge 1
JJ A3 × 15 mm screws 2
KK Magnetic catch 1
4
TV Stand with Gaming Nook
Label Hardware Quantity
LL
MM Cable wraps 2
NN A4 × 13 mm screw 4
OO Touch up pen 1
Anti-tip bracket with plastic strap
Tools Needed
Phillips screwdriver
2
5
NS-HWD1848

Safety information

CAUTION: This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children.
CAUTION: This stand is intended only for use with a TV not weighing more than 60 lbs. (27.2 kg) and not more than 55" wide if sitting on the top shelf. Refer to instructions for details. Using with other products including products that weigh more than the maximum weight allowed, may result in instability, which may cause possible injury.
Model #: NS-HWD1848
Distributed by Best Buy Purchasing, LLC
Manufacturer: Bell'O
This TV Stand is intended for a TV NO WIDER than 55". TV should be centered and should not hang more than one-inch over either edge.
6
TV Stand with Gaming Nook
Please use your stand correctly and safely. Improperusecan cause safety hazards or damage to your
Look out for: What can happen: How to avoid the problem:
l Children climbing
on thestand.
l Children playing
and being active nearthe TV.
l Improper use of
the stand to support TVs.
l TVs that are
above the maximum specified weight and/or size.
l Overloaded
shelves.
l Improperly
moving the stand.
furniture or household items. Carefully read the fol lowing chart.
l Risk of injury or death. l A child playing with a
TV can causeit to tip over.
l Risk of injury or death. l TVs can be very heavy.
Note: older CRTTVs tend to be unbalanced and prone to tipping
l Never allow children to climb on or play with
the stand.
l Do not place toys or food on the top shelves.
Children may t ryto cl imb to reach them out of curiosity.
l ATV must only be set on furniture specifically
designed to support a television.
l Never use a TV that exceeds the weight
ratingsor size guidelinesspecified for the stand.
forward.
l Never exceed theweight limits shown in the
l Risk of injury. l Top-heavy furniture
can tip over.
l Overloaded shelves
can break.
instructions.
l Work from the bottom to t he top when
loading shelves.
l The side shelvessupport up to 15lbs. (6.8kg)
each. The large shelf supports up to 45lbs. (20.4 kg). The top supports upto 60 lbs. (27.2 kg).
l Unload shelves from the top to the bottom
beforemoving the stand.
l The stand can tip over
or break if improperly moved.
l Risk of injury.
l Do not push thestand, especially on a
carpeted floor. Have a friend help you lift the item and set it in place.
l Do not lift t he stand using thetop shelf. Lift
from the frame or leg assembly.
l Remove the TV before moving the TV stand.
WARNING
7

Specifications

Dimensions (H × W × D) 26.0 × 47.5 × 15.5 in. (66 × 120.7 × 39.4 cm) Weight 72.6 lbs. (33 kg) Maximum weight capacity 60 lbs. (27.2 kg)
Top:60 lbs. (27.2 kg)
Maximum shelf capacity
Maximum screen size 55" diagonal
Large shelf:45 lbs. (20.4 kg)
Side shelves:15 lbs. (6.8 kg)
NS-HWD1848
8
TV Stand with Gaming Nook

Assembling your TV stand

Step 1: Setting up the base
A
Insert six wooden dowels (FF)into the base (A), then screw six cam screws (BB) into smaller holes with a Phillips screwdriver.
B
Align the supports (B) with the wooden dowels and the cam screws on the base. The cam lock holes on the sides of the supports should face the front edge of the base. Insert six cam locks (CC) into the cam lock holes, then use a Phillips screwdriver to secure.
You’ll need:
FF (6)
BB (6)
CC (6)
Phillips screwdriver
9
Step 2: Installing the divider panels
A
Insert two wooden dowels (FF)into the edge of the each divider panel (C and D).
B
Align the divider panels' dowels with the holes in the base. The holes on the faces of the divider panels should face outward and the holes on the edges should face down (towards the back). Insert four screws (EE)through the bottom of the base and into the divider panels, then tighten with a Phillips screwdriver.
NS-HWD1848
You’ll need:
10
FF (4)
EE (4)
Phillips screwdriver
TV Stand with Gaming Nook
Step 3: Setting up the large shelf
A
Attach the magnetic catch (KK) to the large shelf (J) with two screws (JJ)and a Phillips screwdriver. The magnet should point out towards the edge of the shelf.
B
Insert four cam screws (BB)into the large shelf with a Phillips screwdriver.
You’ll need:
KK
JJ (2)
BB (4)
Phillips screwdriver
11
Step 4: Attaching the large shelf
A
Insert four wooden dowels (FF) into the inside holes on the edges of the divider panels.
B
Align the wooden dowels on the divider panels with the holes on the large shelf (J). Insert four cam locks (CC), then use a Phillips screwdriver to secure.
NS-HWD1848
You’ll need:
12
FF (4)
CC (4)
Phillips screwdriver
TV Stand with Gaming Nook
Step 5: Attaching the sides
A
Insert 14 wooden dowels (FF) around the edges of the stand assembly. Do not insert dowels into the cam screw holes.
B
Screw 12 cam screws (BB) into the sides (E and F) with a Phillips screwdriver.
13
C
Align the wooden dowels and cam screws on the sides and push them on.
You’ll need:
NS-HWD1848
14
FF (14)
BB (12)
Phillips screwdriver
TV Stand with Gaming Nook
Step 6: Attaching the front edge
A
Insert a wooden dowel (FF) on each side of the front edge (H).
B
Insert the front edge into the holes on the corners of the sides. Make sure that the holes on the narrow side face up.
C
Insert 12 cam locks (CC) into the stand assembly, then secure them with a Phillips screwdriver.
D
Lift the stand upright.
15
E
Slide the swivel brackets until they align with the screw holes on the sides, then secure with two screws (DD)and a Phillips screwdriver.
NS-HWD1848
You’ll need:
16
FF (2)
CC (12)
DD (2)
Phillips screwdriver
TV Stand with Gaming Nook
Step 7: Attaching the small divider
A
Insert two wooden dowels (FF) into the top of the large shelf.
B
Align the small divider (M)with the wooden dowels.
C
Insert a screw (EE) through the bottom of the large shelf and into the divider panel, then secure with a Phillips screwdriver.
You’ll need:
FF (2)
EE (1)
17
Step 8: Attaching the top
A
Insert nine wooden dowels (FF) into the top edges of the shelf assembly.
B
Use a Phillips screwdriver to insert eight cam screws (BB)into the top (G).
NS-HWD1848
18
TV Stand with Gaming Nook
C
Align the wooden dowels (FF)and cam screws (BB)on the top (G) with the stand assembly. Insert eight cam locks (CC), then use a Phillips screwdriver to secure.
You’ll need:
FF (9)
BB (8)
CC (8)
19
Step 9: Attaching the back
A
Align the screw holes on the small back panel (I) with the holes on the top, back edge of the stand assembly, then secure with 16 screws (DD)and a Phillips screwdriver.
B
Align the large back panel (K) with the small back panel, then secure with 16 screws (DD)and a Phillips screwdriver.
:Leave two holes open to attach the cable wrap. See step 9C.
Note
NS-HWD1848
20
TV Stand with Gaming Nook
C
To attach the cable wraps (MM), thread a screw (DD)through each cable wrap, then secure them to the small back panel with a Phillips screwdriver.
You’ll need:
DD (34) MM (2)
Phillips screwdriver
21
Step 10: Attaching the door
A
Remove the screws from the handles (GG), then align the handles with the holes on the door (N). Secure with the screws and a Phillips screwdriver.
B
Insert the hinges (HHand II) into the holes, then slide the door onto the hinges. Secure the door to the hinges with four screws (NN).
NS-HWD1848
You’ll need:
22
GG (2)
HH and II
NN (4)
Phillips
screwdriver
Step 11: Installing the small shelves
A
Insert the shelf supports (AA) at the height that you want your shelves.
B
Slide the shelves (L)onto the shelf supports.
You’ll need:
TV Stand with Gaming Nook
AA (8)
23

INSTALLING ANTI-TIP HARDWARE

1
Align the anti-tip bracket with the two small holes in the upper-left corner of the small back panel, then secure it with the two small screws and a Phillips screwdriver.
2
At the location you want to place your TVstand, secure a second anti-tip bracket to your wall with the two large screws and a Phillips screwdriver. The bracket should be 26in. (66 cm)from the floor.
:Attach at least one anti-tip bracket to a stud in your wall.
Note
3
Insert the zip tie through the brackets on your TV stand and wall, then tighten it.
4
Repeat steps 1-3 for the upper-right corner of your TV stand.
NS-HWD1848
You’ll need:
24
LL (2)
Phillips screwdriver
TV Stand with Gaming Nook

Care and maintenance

l Use your favorite type of furniture polish. l Do not spray directly onto the stand. Spray onto a soft cloth then wipe the
stand.
l Always test any polish in a discrete location first, such as the back of the stand,
to make sure that there is no adverse reaction.
l Dust frequently with a soft cloth. l Never slide objects across surfaces. Lift objects from the top surface rather than
dragging them across the finish when moving them.
l Do not expose your stand to direct sunlight, drying heat sources, or dampness.
25
NS-HWD1848

One-Year Limited Warranty

Definitions:
The Distributor* of Insignia branded products warrants to you, the original purchaser of this new Insignia-branded product (“Product”), that the Product shall be free of defects in the original manufacturer of the material or workmanship for a period of one (1) year from the date of your purchase of the Product (“Warranty Period”).
For this warranty to apply, your Product must be purchased in the United States or Canada from a Best Buy branded retail store or online at www.bestbuy.com or
www.bestbuy.ca and is packaged with this warranty statement.
How long does the coverage last?
The Warranty Period lasts for 1 year (365 days) from the date you purchased the Product. Your purchase date is printed on the receipt you received with the Product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the material or workmanship of the Product is determined to be defective by an authorized Insignia repair center or store personnel, Insignia will (at its sole option): (1) repair the Product with new or rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable products or parts. Products and parts replaced under this warranty become the property of Insignia and are not returned to you. If service of Products or parts are required after the Warranty Period expires, you must pay all labor and parts charges. This warranty lasts as long as you own your Insignia Product during the Warranty Period. Warranty coverage terminates if you sell or otherwise transfer the Product.
How to obtain warranty service?
If you purchased the Product at a Best Buy retail store location or from a Best Buy online website (www.bestbuy.com or www.bestbuy.ca), please take your original receipt and the Product to any Best Buy store. Make sure that you place the Product in its original packaging or packaging that provides the same amount of protection as the original packaging.
To obtain warranty service, in the United States and Canada call 1-877-467-4289. Call agents may diagnose and correct the issue over the phone.
Where is the warranty valid?
This warranty is valid only in the United States and Canada at Best Buy branded retail stores or websites to the original purchaser of the product in the country where the original purchase was made.
26
TV Stand with Gaming Nook
What does the warranty not cover?
l Customer instruction/education l Installation l Set up adjustments l Cosmetic damage l Damage due to weather, lightning, and other acts of God, such as power surges l Accidental damage l Misuse l Abuse l Negligence l Commercial purposes/use, including but not limited to use in a place of
business or in communal areas of a multiple dwelling condominium or apartment complex, or otherwise used in a place of other than a private home.
l Modification of any part of the Product, including the antenna l Display panel damaged by static (non-moving) images applied for lengthy
periods (burn-in).
l Damage due to incorrect operation or maintenance l Connection to an incorrect voltage or power supply l Attempted repair by any person not authorized by Insignia to service the
Product
l Products sold “as is” or “with all faults” l Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.) l Products where the factory applied serial number has been altered or removed l Loss or Theft of this product or any part of the product l Display panels containing up to three (3) pixel failures (dots that are dark or
incorrectly illuminated) grouped in an area smaller than one tenth (1/10) of the display size or up to five (5) pixel failures throughout the display. (Pixel based displays may contain a limited number of pixels that may not function normally.)
l Failures or Damage caused by any contact including but not limited to liquids,
gels or pastes.
27
NS-HWD1848
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY FOR BREACH OF WARRANTY. INSIGNIA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS. INSIGNIA PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE WARRANTY PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.
Contact Insignia:
1-877-467-4289
INSIGNIA is a trademark of Best Buy and its affiliated companies.
*Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2018 Best Buy. All rights reserved.
Made in Vietnam
28
1-877-467-4289(U.S. and Canada) www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC 7601Penn Ave South,Richfield, MN 55423 U.S.A. ©2019Best Buy. All rights reserved. Made in Vietnam.
V4 ENG
19-0306
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use