Insignia NS-HW315-BK Quick Setup Guide

NS-HW315-BK_18-0524_QSG_V1_EN.ai 1 11/7/2018 3:55:06 PMNS-HW315-BK_18-0524_QSG_V1_EN.ai 1 11/7/2018 3:55:06 PM

FINAL

FOR PRINT

QUICK SETUP GUIDE

Compact Power Hub

Final at size: 9 × 6 in. (228.56 × 152.4 mm) Final fold size: 4.5 × 6 in. (114.3 × 152.4 mm)

OVERVIEW

NS-HW315-BK

PACKAGE CONTENTS

• Compact Power Hub

• Quick Setup Guide

FEATURES

• Sleek black design that's a stylish addition to your desk

• 6 ft (1.8 m) fabric-wrapped power cord with an extra-exible design for easy cable routing

• 2 USB ports with 2.4A total output charge and power your USB devices

• 2 AC outlets power devices using a standard power cord

Before using your new product, please read these instructions to prevent any damage.

AC outlets

USB ports

USING YOUR POWER HUB

1 Plug the power cord into a standard 120V AC outlet. 2 Plug the power cords from your devices into the AC outlets on the

hub.

3 Plug your USB devices into the USB ports to power or charge them.

NS-HW315-BK_18-0524_QSG_V1_EN.ai 2 11/7/2018 3:55:06 PMNS-HW315-BK_18-0524_QSG_V1_EN.ai 2 11/7/2018 3:55:06 PM

SPECIFICATIONS

• Dimensions without power cord (H×W×D):

0.9 × 5.4 × 1.8 in. (23.8 × 137 × 46.3 mm)

• Weight: 8.96 oz. (254 g)

• Plug style: Right-angle plug rotated 45 degrees

• Cord length: 6 ft. (1.8 m)

• Total outlets: 2 AC, 2 USB Electrical specications:

• Load rating: 12 amps (for all connected devices combined)

• Line voltage: 125V AC @ 60 Hz

• UL-60950 certied

SAFETY INFORMATION

• RISK OF ELECTRIC SHOCK - Use only in dry locations and only indoors.

• DO NOT plug into another relocatable power tap.

• DO NOT use with any aquarium equipment.

• DO NOT use if correctly grounded outlets are not available.

• DO NOT install this device if there is not at least 33 feet (10 meters) or more of wire between the electrical outlet and electrical service panel.

• DO NOT use in any circumstance that would aect the operation or reliability of life support equipment, any medical applications, or patient care.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

ICES-003

This Class B digital apparatus complies with Canadian ICES-003;

ONE-YEAR LIMITED WARRANTY

Visit www.insigniaproducts.com for details.

CONTACT INSIGNIA

For customer support, call 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) www.insigniaproducts.com

Made in China

V1 ENGLISH 18-0524