Quick Setup Guide | NS-HTMC01-B/NS-HTMC01-BL/NS-HTMC01-R
Desktop Ceramic Heater
Congratulations on your purchase of this high-quality Insignia
product. Your NS-HTMC01-B, NS-HTMC01-BL, or NS-HTMC01-R
represents the state of the art in desktop ceramic heaters and
is designed for reliable and trouble-free performance.
IMPORTANT SAFETY INSTRUCTIONS
1 Read all instructions before using this heater.
2 This heater is hot when in use. To avoid burns, do not let bare skin
touch hot surfaces. Keep combustible materials, such as furniture,
pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9m) from
the front of the heater and keep them away from the sides and rear.
3 BECAUSE OF THE HOT SURFACE, DO NOT LET CHILDREN NEAR
THIS HEATER WHEN IT IS OPERATING.
4 Always unplug heater when not in use.
5 Do not operate any heater with a damaged cord or plug or after
the heater malfunctions, has been dropped or damaged in any
manner. Discard heater, or return to authorized service facility for
examination and/or repair.
6 Do not use outdoors.
7 This heater is not intended for use in bathrooms, laundry areas
and similar indoor locations. Never locate heater where it may fall
into a bathtub or other water container.
8 Do not run cord under carpeting. Do not cover cord with throw
rugs, runners, or similar coverings. Do not route cord under
furniture or appliances. Arrange cord away from trac area and
where it will not be tripped over.
9 To disconnect heater, turn controls to o, then remove plug from
outlet.
10 Do not insert or allow foreign objects to enter any ventilation or
exhaust opening as this may cause an electric shock or re, or
damage the heater.
11 To prevent a possible re, do not block air intakes or exhaust in
any manner. Do not use on soft surfaces, like a bed, where
openings may become blocked.
12 A heater has hot and arcing or sparking parts inside. Do not use it
in areas where gasoline, paint, or ammable liquids are used or stored.
13 Use this heater only as described in this manual. Any other use
not recommended by the manufacturer may cause re, electric
shock, or injury to persons.
14 Always plug heaters directly into a wall outlet/receptacle. Never use
with an extension cord or re-locatable power tap (outlet/power strip).
15 SAVE THESE INSTRUCTIONS
PACKAGE CONTENTS
• Desktop ceramic heater
• Quick Start Guide
FEATURES
• Adjusts automatically, based on ambient temperature
• The built-in fan circulates the heat
• Quiet operation
• Light weight, convenient to carry and move
• Double over-heating protection
• Compact size, suitable for home and oce
• Automatically turns o if it tips over
Front
Front panel
Protective
metal mesh
ON/OFF button
Power indicator
light
Back
Air intake
Rear cover
Tip over protection
PREPARING YOUR DESKTOP CERAMIC
HEATER
1 Remove your heater from the package and place it on a
level surface, such as a desktop or the oor.
2 Plug the power cord into a standard 120V wall outlet.
Before using your new product, please read these
instructions to prevent any damage.
USING YOUR PORTABLE CERAMIC
HEATER
1 Push the ON/OFF button to turn on your heater. The heater,
fan, and Power indicator light turn on.
2 Push the ON/OFF button again to turn o your heater.
Note: To test the tip over protection, pick up your heater while it's
operating. Your heater and the power indicator light should both
turn o. Put your heater down. The heater and the power indicator
light should both turn on.
CLEANING YOUR PORTABLE WIRE
HEATER
Important: Unplug the heater before you attempt to clean it.
• Clean your heater with a soft cloth, moistened with water.
Do not use chemical cleaners. Allow to dry thoroughly
before using.
TROUBLESHOOTING
• If the heater isn’t working, make sure that it’s plugged in
and that the power outlet is providing power.
• Make sure that the power cord is in good condition. If the
cord is cut or frayed, do not use the heater until you have it
repaired.
SPECIFICATIONS
Description
Model No.
Voltage/Frequency
Power
Noise (dB)
Product size
Product weight
Desktop ceramic heater
NS-HTMC01-B
NS-HTMC01-BL
NS-HTMC01-R
120V~60Hz
600W
≤50dB (1m distance)
7.28 × 4.72 × 3.74 in.
(185 × 120 × 95 mm)
1.43 lbs (0.65kg)
ONE-YEAR LIMITED WARRANTY
For complete warranty, visit www.insigniaproducts.com.
CONTACT INSIGNIA
For customer service, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in China
V1 ENGLISH 14-0615