Insignia NS-32L550A11, NS-37L550A11, NS-42L550A11, NS-46L550A11 User Manual

32"/37"/42"/46" LCD TV
QUICK SETUP
Front features
Connecting a DVD or Blu-ray DVD player, cable box, satellite receiver, or game console
Using HDMI (best)
Using composite (fair)
GUIDE
NS-32L550A11 / NS-37L550A11 / NS-42L550A11 / NS-46L550A11
Thank You
for purchasing this ne Insignia television.
We hope you enjoy the quality and reliability
_______________________________
Remote control
and 2 AA batteries
Power
indicator
Installing the stand
1 Carefully place your TV screen face-down on
a cushioned, clean surface to protect the screen from damages and scratches.
2 Secure the base to the stand with
the four screws provided.
Remote control sensor
Using component (better)
Connecting an antenna
Connect a 75 ohm cable (not included) to the ANT/CABLE IN jack on the back of your TV and the RF OUT jack on the antenna.
AC
power
cord
Audio
cable
Component
cable
TV stand and screws
Cleaning
cloth
Remote
control holder
Installing a wall-mount bracket
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen from damages and scratches.
2 Remove the four screws holding
the base to the stand.
3 Remove the four screws securing the
stand.
4 Attach the wall-mount bracket to the back of your TV using
screws provided with the wall mount.
Setting up your remote control
1 Remove the battery cover.
Using S-Video (good)
2 Insert two AA batteries into the battery compartment. Make sure that the +
and – symbols on the batteries align with the + and – symbols in the battery compartment.
3 Replace the cover.
Quick Setup Guide
Programming your remote control
To program an existing universal remote control to work with your new Insignia TV, see the table below for common codes. If you have problems programming your remote or need a dierent remote control code, visit www.insigniaproducts.com for the latest remote control code information.
Universal remote control TV codes (for all Insignia TVs manufactured after Jan. 1, 2007)
Universal remote control makers and models Set-top box makers and models
Philips
PHDVD5, PH5DSS,
PMDVR8, PDVR8
115
To program your universal Insignia remote control to work with other devices in the home, see your user guide or visit www.insigniaproducts.com.
RCA
RCU807
135
One for All URC-6690
0464
Sony
RM-VL600
8043
TIVO
Series 3, HD
0091
Comcast
M1057
0463
Dish Network
VIP508, VIP622
720
Motorola
DRC800
0463
DirectTV
RC23
10463
32"/37"/42"/46" LCD TV I QUICK SETUP GUIDE I NS-32L550A11/NS-37L550A11/NS-42L550A11/NS-46L550A11
Connecting a Home Theater System
Using analog audio
Using digital audio
Turning on your TV for the rst time
1 Connect the power cord, then press
(power) to turn on your TV.
2 The Choose your menu language screen
opens. Press or to highlight the language you want, then press OK/ENTER.
3 The Time screen opens. Press or to
select Auto or Manual, then press
MOVE SELECT PREVIOUS EXIT
Set menu language to English, Français, or Español
OK/ENTER.
4 Press or to highlight Time Zone, then
press or to select your time zone.
5 Press or to highlight Daylight
Savings, then press or to select On
(if your viewing area observes Daylight Savings Time) or O (if your viewing area does not observe Daylight Savings Time).
Time Zone Daylight Savings
Year Month Day Time
MOVE SELECT PREVIOUS EXIT
If Automatic, options are automatically set by TV source
6 If you selected Manual for Mode, set the
date by pressing or to highlight Year, Month, or Day, then press or to adjust the setting.
7 If you selected Manual for Mode, set the time by pressing or to highlight
Time, then pressing or to select the hour, minute, or AM/PM eld. Press or to adjust the setting. Press OK/ENTER.
8 The Choose your Picture Mode screen opens.
Press or to highlight Home Mode (default) or Retail Mode, then press OK/ENTER. If you selected Retail Mode, a message appears “Are you sure you want Retail Mode? Since Energy saving is not realized.” Select Yes to continue, or select
MOVE SELECT PREVIOUS EXIT
Reduces total power consumption
No to change your selection.
9 The Choose your TV source screen opens.
Press or to highlight Antenna, Cable, or Cable/Satellite Box (if your
cable TV uses a box, select
Cable/Satellite Box), then press OK/ENTER. If you chose Cable, your TV automatically starts
Antenna or
MOVE SELECT PREVIOUS EXIT
Channel scan may take 20+ minutes
scanning for channels available in your viewing area. If you chose Cable/Satellite box, your TV does not need to scan for channels.
Choose your menu Language
English
Français Español
OK
ENTER
OK
ENTER
Choose your Picture Mode
OK
ENTER
Choose your TV source
Antenna
Cable Cable/Satellite box
OK
ENTER
MENU
Time
MENU
Home Mode
Retail Mode
MENU
MENU
Newfoundland
12 : 01 AM
Digital Channels
0
Analog Channels
0
Scanning for digital channels
EXIT
EXIT
otuAedoM
On
2010
Jan
1
EXIT
EXIT
Selecting the video input source
Press INPUT, press or to highlight a source, then press OK/ENTER. You can
also press any of the video source buttons directly.
Viewing additional information
• Press INFO to see status information such as channel number, channel name (if available), signal source, program desription, and DTV signal strength.
Press GUIDE to show the digital program guide, which may show current channel name, program name, time, rating, and summaries, depending on information provided by the broadcaster.
On-screen menu overview
Picture menu Audio menu
Picture
Mode Brightness Contrast Color Tint
MOVE SELECT PREVIOUS EXIT
Adjust settings to affect picture quality
PICTURE AUDIO CHANNELS SETTINGS USB
OK
ENTER
MENU EXIT
Energy Savings
Audio
50 48 70
0 0ssenprahS
Audyssey Dynamic Volume SRS TruSurround HD Treble Bass Balance Digital Audio/SPDIF
MOVE SELECT PREVIOUS EXIT
Adjust settings to affect sound quality
PICTURE AUDIO CHANNELS SETTINGS
OK
ENTER
MENU EXIT
Channels menu Settings menu
Channels
Auto Channel Search Add/Skip Channels Favorites Channel Labels Channel Strength
MOVE SELECT PREVIOUS EXIT
Adjust channel options
PICTURE AUDIO CHANNELS SETTINGS
OK
ENTER
MENU EXIT
USB
ffOylnO oiduA
Settings
Parental Controls Closed Caption Time Menu Settings Auto Input Sensing Input Labels
MOVE SELECT PREVIOUS EXIT
Set various TV options
PICTURE AUDIO CHANNELS SETTINGS
OK
ENTER
MENU
USB menu
Photos
USB
Browse Photos
Favorite Photos View Slideshow Settings
MOVE SELECT PREVIOUS EXIT
Find photos that are on the USB device
PICTURE AUDIO CHANNELS SETTINGS
OK
ENTER
MENU
USB
EXIT
Navigating menus with your remote control
Medium
PCM
EXIT
Two-year limited warranty
See your User Guide or visit www.insigniaproducts.com for details.
Need additional help?
See your User Guide! This comprehensive guide includes everything from basic
USB
Off
32 32
0
how-to steps to more advanced features.
Check out our online community forum at www.insigniaproducts.com for helpful information from other Insignia TV owners.
We’re here for you
www.insigniaproducts.com
USB
On
For customer service, call:
877-467-4289 (U.S./Canada markets)
01 800-926-3000 (Mexico market)
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richeld, MN USA 55423-3645
Best Buy Imports, S. de R.L. de C.V. Av. Santa Fe 485, Segundo Piso, Colonia Cruz Manca, Programa Parcial de Desarrollo Santa Fe, Delegación Cuajimalpa, Distrito Federal, México 05349
RFC#BBI0802114Q2
© 2010 BBY Solutions, Inc.
All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners.
Connecting power
Plug the AC power cord into the AC IN jack on the back of your TV, then plug the other end of the cord into a power outlet.
Source List
TV
AV
Component
VGA HDMI 1 HDMI 2 HDMI 3 HDMI 4
USB
Adjusting the volume
• Press VOL+ or VOL- to change the volume.
• Press MUTE to turn o the sound.
Selecting a channel
• To move to a dierent channel in the channel list, press CH or CH . OR
• Enter the channel number directly using the number buttons.
Press to open the
on-screen menu.
Press to select
menu options.
Press to return to the
previous menu.
Press to move the cursor on the screen or to adjust a selected item.
Press to conrm a selection or to enter a sub-menu.
Press to close the menu.
Press to
change the
volume
Press to change the channel
ENGLISH 10-0324
Loading...