The home theater entertainment experience is a growing trend, and larger TVs are popular
purchases. However, TVs are not always supported on the proper stands or installed
according to the manufacturer’s recommendations. We and the consumer electronics
industry are committed to making home entertainment enjoyable and safe.
TVs that are inappropriately placed on dressers, bookcases, shelves, desks, speakers, chests, or
carts may fall over and cause injury.
Tune into safety
•
One size of TV stand does not fit all. Use only a TV stand
rated for the weight of your TV.
•
Carefully read and understand all enclosed instructions
for proper use of this product.
•
Don’t let children climb on or play with entertainment
system furniture and TVs.
•
Don’t place TVs on furniture that can easily be used as
steps, such as a crate or chest of drawers.
•
Remember that children can become excited while
watching a program, especially on a “larger-than-life” TV.
Make sure that you place or install the TV where it cannot
be pushed, pulled over, or knocked down.
•
Make sure that you route all cords and cables so that they
cannot be pulled or grabbed by curious children.
CHILD SAFETY
your flat panel display
safety tips in mind
Wall mounting
If you decide to wall mount your TV, always remember:
•
One size of wall mount does not fit all. Use only a wall mount rated for the weight of
your TV and that has been recommended by this TV manufacturer, listed in this
manual, or otherwise listed by an independent laboratory as suitable for your TV.
•
Follow all instructions supplied by the TV and wall mount manufacturers.
•
If you have any doubts about your ability to safely wall mount your TV, get help from a
professional installer.
•
Make sure that the wall where you are mounting the TV is
appropriate. Some wall mounts are not designed to be
mounted to walls backed with steel studs or cinder blocks. If
you are unsure, ask a professional installer.
•
TVs can be heavy. At least two people are required for safe wall mount installation.
www.insigniaproducts.com
1
Important Safety
Instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates that
dangerous voltage
constituting a risk of electric
shock is present within your TV.
This label is located on the
back of your TV.
14 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as
power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
15 The wall plug is the disconnecting device. The
plug must remain readily operable.
16 Remote control batteries should not be exposed
to excessive heat such as sunshine, fire, or the
like.
17 The apparatus should not be exposed to
dripping or splashing, and no objects filled with
liquids, such as vases, should be placed on the
apparatus.
This symbol indicates that
there are important operating
and maintenance instructions
in the literature accompanying
your TV.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in
accordance with the manufacturer's
instructions.
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9 Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade or
the third prong are provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10 Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11 Only use attachments/accessories specified by
the manufacturer.
12 Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is
used, use caution when moving
the cart/apparatus combination
to avoid injury from tip-over.
13 Unplug this apparatus during lightning storms
or when unused for long periods of time.
WARN ING
Electric shock hazard
To reduce the risk of fire or electric shock, do not
remove any cover or expose the device to rain or
moisture. No user-serviceable parts are inside. Refer
servicing to qualified service technicians.
Lightning
For added protection for your device receiver
during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the power outlet and disconnect any
antenna or cable system. This helps prevent
property damage and personal injury from
lightning and power line surges.
Power lines
An outside antenna system should not be located in
the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall
into such power lines or circuits. When installing an
outside antenna system, take extreme care to keep
from touching such power lines or circuits as
contact with them might be fatal.
Handling the LCD panel
• Your TV’s screen is made of glass. Do not drop
your TV or hit, jolt, or press hard against the LCD
panel. If the screen breaks, be careful of broken
glass.
• If the LCD panel is broken, make absolutely sure
that you do not touch the liquid in the panel. This
may cause skin inflammation.
• If the liquid gets in your mouth, immediately
gargle, rinse, and consult with your doctor. Also, if
the liquid gets in your eyes or touches your skin,
consult with your doctor after rinsing for at least
15 minutes or longer in clean water.
Replacement parts
When replacement parts are required, make sure
that the service technician uses replacement parts
specified by the manufacturer that have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock,
personal injury, or other hazards.
www.insigniaproducts.com
2
NS-32E400NA14
Safety check
After completing any service or repair to this device,
ask the service technician to perform routine safety
checks to determine that your TV is in correct
operating condition.
Power source
Operate your TV only from the type of power source
indicated on the marking label. If you are not sure
of the type of power supplied to your home, consult
an electrician or your local power company.
Servicing
These servicing instructions are for use by qualified
service personnel only. To reduce the risk of electric
shock, do not perform any servicing other than that
contained in the operating instructions unless you
are qualified to do so.
CAUTION
Damage requiring service
Unplug this TV from the power outlet and refer
servicing to qualified service personnel under the
following conditions:
• When the power supply cord or plug is damaged
or frayed.
• If liquid has been spilled or objects have fallen
into your TV.
• If your TV has been exposed to rain or water.
• If your TV does not operate normally by following
the operating instructions. Adjust only those
controls covered by the operating instructions
because incorrect adjustment of other controls
may result in damage and will often require
extensive work by a qualified technician to restore
your TV to its normal operation.
• If your TV has been dropped or damaged in any
way.
• When your TV exhibits a distinct change in
performance.
Outdoor antenna grounding
If an outside antenna or cable system is connected
to your TV, make sure that the antenna or cable
system is grounded to provide some protection
against voltage surges and built-up static charges.
Article 810 of the National Electrical Code,
ANSI/NFPA No. 70, provides information with
respect to correct grounding of the mast and
supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding
conductors, location of the antenna-discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode.
Antenna lead-in wire
1
Grounding clamp
2
Antenna discharge
3
unit
Grounding
4
conductors
Ground clamps
5
Power service
6
grounding electrode
system
Electric service
7
equipment
Note to CATV system installer
Article 820 of the National Electrical Code,
ANSI/NFPA No. 40 provides guidance for correct
grounding. Specifically, it states that the cable
ground must be connected to the grounding
system of the building as close to the point of cable
entry as practical.
Condensation
Moisture will form on the TV if the TV is brought
from cool surroundings into a warm room or if the
temperature of the room rises suddenly. When this
happens, the TV's performance may be impaired. To
prevent this, let the TV stand in its new
surroundings for about an hour before switching it
on, or make sure that the room temperature rises
gradually.
Condensation may also form during the summer if
the TV is exposed to the breeze from an air
conditioner. In such cases, change the location of
the TV.
Mobile telephone warning
To avoid interference with your TV picture and
sound, operating problems, or even damage, keep
your cordless and cellular telephones away from
the TV.
End of life directives
Your TV contains tin-lead solder containing a small
amount of mercury. Disposal of this material may
be regulated for environmental reasons. Your TV
also contains material that can be recycled and
reused. For disposal or recycling information,
contact your local authorities to find a recycler in
your area.
Non-active pixels
The LCD panel contains almost 3 million thin film
transistors, which provide exceptionally sharp video
quality. Occasionally, a few non-active pixels may
appear on the screen as a fixed blue, green, or red
point. These non-active pixels do not adversely
affect the performance of your TV, and are not
considered defects.
3
www.insigniaproducts.com
Insignia 32" LED TV
Insignia 32" LED TV
Introduction
Congratulations on your purchase of a high-quality
Insignia product. Your NS-32E400NA14 represents
the state of the art in LED TV design and is designed
for reliable and trouble-free performance.
MHL™
Connect your MHL-enabled device, such as a cell
phone or Roku Streaming Stick™, and view your
device’s screen on your TV. Supports 1080p HD
video and 5.1 digital surround sound playback from
your mobile device. (Requires an MHL-enabled
phone or tablet and an MHL cable.) (See page 22 for
connection instructions.)
INlink
Enjoy the benefit of having HDMI CEC compatible
products plug and play! No setup is needed! CEC
technology lets different components discover and
communicate with each other. (See page 59 for
instructions on how to use INlink.)
DTS Sound™
DTS Sound delivers clear, crisp, and natural sound
while providing deep enveloping bass.
www.insigniaproducts.com
4
Installing the stand or wall-mount bracket
Notes
• If you plan to wall-mount your TV, do not install the stand.
• Store the stand and stand screws in case you decide to use the stand in
the future.
Installing the stand
To install the stand:
1 Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages and
scratches.
NS-32E400NA14 Insignia 32" LED TV
2 Insert the stand column into the back of your TV.
Front of stand
5
www.insigniaproducts.com
Insignia 32" LED TV
3 Secure the TV stand to your TV with the four provided screws.
Screw typeScrew length# of screws
M414 mm4
www.insigniaproducts.com
6
Installing a wall-mount bracket
Warning
This TV is intended to be supported by a UL Listed wall mount bracket with
suitable weight/load. (See “Miscellaneous” on page 75.)
To attach your TV to a wall-mount bracket:
1 Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages and
scratches.
2 If the TV stand is attached, remove the four screws that secure the stand to your TV, then remove the stand.
NS-32E400NA14 Insignia 32" LED TV
3 Attach the wall-mount bracket to your TV using the mounting holes on the back of your TV. See the instructions
that came with the wall-mount bracket for information about how to correctly hang your TV.
Notes
• The length of the wall-mount screws vary depending on the wall-mount
bracket you purchased. See the instructions that came with the
wall-mount bracket for screw lengths.
• The mounting holes on the back of your TV take type M4 screws.
3.94 in. (100 mm)
3.94 in. (100 mm)
7
www.insigniaproducts.com
Insignia 32" LED TV
TV components
Package contents
•32" LED TV
• Remote control and batteries (2 AAA)
• TV stand and screws (4)
• Quick Setup Guide
• Important Information
Front
# ItemDescription
The remote control sensor
receives signals from the remote
Remote control
1
sensor and
Power indicator
2
MENU
3
INPUT
4
VOL+/VOL–
5
CH/CH
6
POWER
control. Do not block.
The power indicator:
• Turns off when your TV is
on.
•Lights red when your TV is
off (standby mode).
Press to open the on-screen
menu. For more information, see
“Navigating the menus” on
page 39.
Press one or more times to select
the video input source your want,
then wait a few seconds. Your TV
switches to the source you
selected. For more information,
see “Selecting the video input
source” on page 38.
In menu mode, press to confirm
selections.
Press to increase or decrease the
volume.
Press to go to the next or previous
channel in the channel list. For
more information, see “Selecting
a channel” on page 40.
Press to turn your TV on or off
(standby mode).
Warning: When your TV is off,
power still flows through it. To
completely disconnect power,
unplug the power cord.
Side
# ItemDescription
Connect a USB flash drive to this
jack to view compatible JPEG
1
USB
2
/AUDIO OUT
3
HDMI 1/ARC
4
HDMI 2/MHL
5
HDMI 3/DVI
picture files. For more information,
see “Connecting a USB flash drive”
on page 29 and “Using a USB flash
drive” on page 64.
Connect headphones, an analog
audio amplifier, a home theater
system, or a sound bar to this jack.
For more information, see
“Connecting headphones” on
page 30 or “Using analog audio” on
page 32.
Connect an HDMI device to this
jack. For more information, see
“Using HDMI (best)” on pages 12,
18, 23, or 27.
OR
Connect a home theater to this jack.
Connect an HDMI device to this
jack. For more information, see
“Using HDMI (best)” on pages 12,
18, 23, or 27.
OR
Connect an MHL-enabled device,
such as a cell phone, to this jack to
view pictures and videos stored on
the device. For more information,
see “Connecting an MHL-enabled
device” on page 22 and “Using an
MHL-enabled device or Roku
Streaming Stick” on page 62.
Connect an HDMI device to this
jack. For more information, see
“Using HDMI (best)” on pages 12,
18, 23, or 27.
OR
Connect the video for a DVI device
to this jack. For more information,
see “Using DVI (same as HDMI but
requires an audio connection)” on
pages 13, 19 or 28.
www.insigniaproducts.com
8
NS-32E400NA14 Insignia 32" LED TV
Back
# ItemDescription
Connect the audio for a
component video device to these
jacks. For more information, see
“Using component video (better)”
on page 14, 20, or 24.
1
L and R (audio)
OR
Connect the audio for a
composite video device to these
jacks. For more information, see
“Using composite video (good)”
on page 15, 21, or 25.
The COMPONENT/AV Y/VIDEO
jack works as one of the three
component video jacks or as a
composite video jack.
Connect the video for a
COMPONENT/AV
Y/VIDEO, P
2
OR
COMPONENT/AV
Y/VIDEO
B
, P
component video device to these
jacks. For more information, see
R
“Using component video (better)”
on page 14, 20, or 24.
OR
Connect the video for a
composite video device to the
COMPONENT/AV Y/VIDEO jack.
For more information, see “Using
composite video (good)” on
page 15, 21, or 25.
Connect a digital audio amplifier
or home theater system to this
DIGITAL OUTPUT
3
(coaxial)
jack to listen to TV audio through
the amplifier speakers. For more
information, see “Using digital
audio” on page 31.
Connect an antenna or cable TV
4
ANT/CABLE IN
to this jack. For more information,
see “Connecting an antenna or
cable TV (no box)” on page 17.
Connect the audio for a computer
to this jack. For more information
see “Using VGA (most common)”
on page 26.
VGA/DVI
5
AUDIO IN
OR
Connect the audio for a DVI
device to this jack. For more
information see, “Using DVI (same
as HDMI but requires an audio
connection)” on pages 13, 19,
or 28.
Connect the video (VGA) for a
6
VGA
computer to this jack. For more
information, see “Using VGA
(most common)” on page 26.
9
www.insigniaproducts.com
Insignia 32" LED TV
Remote control
# ButtonDescription
Press to turn your TV on or off (standby mode).
1
(power)
2
Numbers
3
4
ENTER
5
MENUPress to open the on-screen menu.
6
EXITPress to close the on-screen menu.
7
ASPECT
8
VOL+/–Press to increase or decrease the volume.
Warn ing: When your TV is off, power still flows
through it. To disconnect power, unplug the power
cord.
Press to enter channel numbers and the parental
control password.
Press to enter a digital sub-channel number. For more
information, see “Selecting a channel” on page 40.
Press to confirm selections or changes or to open a
sub-menu.
Press to change how the picture looks on the screen
(aspect ratio). For more information, see “Aspect ratio
options” on page 41.
# ButtonDescription
10
FAVOR ITE
11
INlink Controls
12
INPUT
13
(return)In TV mode, press to return to the previous channel.
14
S T W X
15
(home)
16
INFO*
17
CCD
18
MUTE
19
CH/CH
20
MTS/SAP
21
PICTURE
22
AUDIO
Press to open the Favo rite channel list. For more
information , see “Setting up a favorite channel list” on
page 47 and “Viewing a favorite channel” on page 47.
Press to control INlink-compatible (HDMI CEC) devices.
For more information, see “Us ing INlink” on page 59.
Press to open the INPUT SOURCE list, press S or T on
the remote control to select the video input source,
then press ENTER. For more information, see
“Selecting the video input source” on page 38.
Press to nav igate in on-screen menus and to adjust
settings.
Press to open the MHL device’s home menu when an
MHL device is plugged in.
Press to display TV status information, such as the
channel number, channel name (if available), o r signal
source. For more information, see “Viewing channel
informati on” on page 40.
Press to turn close d capti oning o n or of f. You can s elect
CC Of f, CC On, or CC O n when mute. For more
information, see “Turning closed captioning on or off”
on page 53.
Press to mute the sound. Press again to restore the
sound.
Press to change TV channels. For more information,
see “Selecting a channel” on page 40.
Press to select the audio mode for an analog program.
You can select:
• Mo no—Select this option if there is noise or
static on weak stereo broadcasts.
• Stereo—Select this option for programs
broadcast in stereo.
• SAP—Select this option to listen to a
secondary audio program, if available.
OR
Press to select the audio language for a digital
program, if alternate languages are available.
Press to select the picture mode. You can select
Energy Savings, Standard, Vivid, Movie, or
Custom. For more information, see “Picture Mode” in
“Adjusting the TV picture” on page 40.
Press to select the sound mode. You can select
Standard, Theater, Music, News, or Custom. For
more information, see “S ound Mode” in “Adjusting
sound settings” on page 43.
9
SLEEP
Press to set the sleep timer. You can select Off, 5, 10, 15, 30, 60, 90, 120, 180, or 240 minutes. For more
information, see “Setting the sleep timer” on page 57.
www.insigniaproducts.com
10
NS-32E400NA14 Insignia 32" LED TV
What connection should I
use?
Your TV has several connection types for
connecting devices to your TV.
For the best video quality, you should connect a
device to the best available connection.
Use the following tables to identify cables:
Video
quality
Best (use this
if your devices
have HDMI)
Better than
composite or
coaxial
Connection
type and
jack
HDMI
video/audio
Component
video (requires
an audio
connection)
Cable connector
Connection
type and
jack
Coaxial digital
audio
Analog audio
input
Analog audio
output
Cable connectors
Better than
coaxial
Good
Composite video
(requires an
audio
connection)
Coaxial
video/audio
VGA (computer)
video and audio
You can use the HDMI 3/DVI jack on your TV to
connect a DVI device to your TV. You need to attach
an HDMI-to-DVI adapter to the end of the HDMI
cable that connects to the DVI device.
Cautions
• Check the jacks for position and type
before making any connections.
• Loose connections can result in image or
color problems. Make sure that all
connections are tight and secure.
• The external audio/video equipment
shown may be different from your
equipment. If you have questions, refer to
the documentation that came with your
equipment.
• Always unplug the power cord when
connecting external equipment.
11
www.insigniaproducts.com
Insignia 32" LED TV
Connecting a cable or satellite box
Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the
best connection type available. For more information, see “What connection should I use?” on page 11.
Using HDMI (best)
Side of TV
On your TV
HDMI cable
connector
HDMI cable
HDMI jack
To connect a cable or satellite box using HDMI:
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT
jack on the cable or satellite box.
4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
S
or T to highlight HDMI 1, HDMI 2, or HDMI 3, then press ENTER.
Cable or
satellite box
Note
An HDMI cable carries both audio and video. You do not need to use any
audio cables.
www.insigniaproducts.com
12
Using DVI (same as HDMI but requires an audio connection)
Note
You must use the HDMI3/DVI jack to connect a DVD or Blu-ray player using
DVI. If you use another HDMI jack, you will not hear sound from the TV
speakers.
Side of TV
On your TV
NS-32E400NA14 Insignia 32" LED TV
Cable or
satellite box
HDMI cable
connector
HDMI 3/DVI
jack
To connect a cable or satellite box using DVI:
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the
adapter to the DVI OUT jack on the cable or satellite box.
4 Connect the other end of the cable to the HDMI 3/DVI jack on the side of your TV.
5 Connect a 3.5mm audio cable (not provided) to the VGA/DVI AUDIO IN jack on the back of your TV and to the
AUDIO OUT jacks on the cable or satellite box.
3.5mm audio
connector
HDMI cable with
HDMI-DVI adapter
VGA/DVI
AUDIO IN
jack
Back of TV
Note
When you connect the audio using the VGA/DVI AUDIO IN jack, the audio
output is analog.
3.5mm audio
cable
13
6 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
7 Press INPUT to open the INPUT SOURCE list.
8 Press
S
or T to highlight HDMI 3, then press ENTER.
www.insigniaproducts.com
Insignia 32" LED TV
Using component video (better)
Note
Cables are often color-coded to match color-coded jacks.
On your TV
Cable or
satellite box
Component
video cable
connectors
Analog
audio cable
connector
Audio cable
Component video cable
Component
video jacks
Analog
audio jacks
Back of TV
To connect a cable or satellite box using component video:
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect a component video cable (not provided) to the COMPONENT/AV Y/VIDEO, P
B
, and PR video jacks on
the back of your TV and the component video out jacks on the cable or satellite box.
4 Connect an audio cable (not provided) to the L and R audio jackson the back of your TV and to the audio out
jacks on the cable or satellite TV box.
Notes
•The COMPONENT/AV Y/VIDEO, P
B
, and PR video jacks (used to connect
a component device) share the L and R audio jacks with the
COMPONENT/AV Y/VIDEO jack (used to connect a composite device).
• When you connect the audio using the L and R audio jacks, the audio
output is analog.
5 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
6 Press INPUT to open the INPUT SOURCE list.
7 Press
S
or T to highlight Component/AV, then press ENTER.
www.insigniaproducts.com
14
Using composite video (good)
Notes
• Cables are often color-coded to match color-coded jacks.
• The yellow video connector on the AV cable connects to the green
COMPONENT/AV Y/VIDEO jack.
NS-32E400NA14 Insignia 32" LED TV
On your TV
Composite
video cable
connector
Composite
video jack
To connect a cable or satellite box using composite video:
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an AV cable (not provided) to the COMPONENT/AV Y/VIDEO jack and L and R audio jacks on the back
of your TV and to the composite video and audio out jacks on the cable or satellite box.
Analog audio
cable
connectors
Analog
audio jacks
(composite video cable)
AV cable
Back of TV
Cable or
satellite box
Notes
•The COMPONENT/AV Y/VIDEO, P
a component device) share the L and R audio jacks with the
COMPONENT/AV Y/VIDEO jack (used to connect a composite device).
• When you connect the audio using the L and R audio jacks, the audio
output is analog.
4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
S
or T to highlight Component/AV, then press ENTER.
B
, and PR video jacks (used to connect
15
www.insigniaproducts.com
Insignia 32" LED TV
Using coaxial (good)
On your TV
Coaxial cable
connector
ANT/CABLE IN
jack
Cable or
satellite box
Back of TV
To connect a cable or satellite box using coaxial:
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the back of your TV and to the coaxial out
jack on the cable or satellite box.
4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
7 If you cannot tune to channels you know exist, scan for channels. See “Automatically scanning for channels” on
S
page 45.
or T to highlight TV, then press ENTER.
Notes
• Use a coaxial cable to eliminate interference and noise from radio
waves.
• Do not bundle the coaxial cable with the power cord or other cables.
Coaxial cable
www.insigniaproducts.com
16
NS-32E400NA14 Insignia 32" LED TV
Connecting an antenna or cable TV (no box)
On your TV
Antenna or cable TV
(no box)
Coaxial cable
connector
ANT/CABLE IN
jack
Back of TV
To connect an antenna or cable TV (no box):
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the back of your TV and to the antenna or
cable TV wall jack.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Go through the Setup Wizard on page 36.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
7 If you cannot tune to channels you know exist, scan for channels. See “Automatically scanning for channels” on
S
page 45.
or T to highlight TV, then press ENTER.
Coaxial cable
Notes
• Use a coaxial cable to eliminate interference and noise from radio
waves.
• Do not bundle the coaxial cable with the power cord or other cables.
• If the antenna is not installed correctly, contact qualified service
personnel to correct the problem.
• If the signal level for a channel is weak, the picture may be distorted.
Adjust the antenna or use a highly directional outdoor or set-top
antenna with a built-in amplifier.
• If the picture quality is good on some channels and poor on others, the
problem may be caused by a poor or weak signal from the broadcaster
or cable TV provider.
• If you connect to cable or satellite TV without a set-top box and
experience poor picture quality, you may need to install a set-top box to
improve signal reception and picture quality. Contact your cable or
satellite TV provider about upgrading to a set-top box.
• Many high-definition (HD) channels upscale standard-definition (SD)
content. The picture displayed on your TV is still displayed as SD, thus
the picture quality will not be as clear or crisp as it would be if the
content was originally recorded in HD.
17
www.insigniaproducts.com
Insignia 32" LED TV
Connecting a DVD or Blu-ray player
Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see “What connection should I use?” on page 11.
Using HDMI (best)
On your TV
HDMI cable
connector
HDMI jack
To connect a DVD or Blu-ray player using HDMI:
1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT
jack on the DVD or Blu-ray player.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the
documentation that came with the player.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
S
or T to highlight HDMI 1, HDMI 2, or HDMI 3, then press ENTER.
Side of TV
DVD or Blu-ray player
HDMI cable
Note
An HDMI cable carries both audio and video. You do not need to use any
audio cables.
www.insigniaproducts.com
18
Using DVI (same as HDMI but requires an audio connection)
Note
You must use the HDMI 3/DVI jack to connect a DVD or Blu-ray player using
DVI. If you use another HDMI jack, you will not hear sound from the TV
speakers.
Side of TV
On your TV
NS-32E400NA14 Insignia 32" LED TV
DVD or Blu-ray player
HDMI cable
connector
HDMI 3/DVI
jack
To connect a DVD or Blu-ray player using DVI:
1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the
adapter to the DVI OUT jack on the DVD or Blu-ray player.
3 Connect the other end of the cable to the HDMI 3/DVI jack on the side of your TV.
4 Connect a 3.5mm audio cable (not provided) to the VGA/DVI AUDIO IN jack on the back of your TV and to the
AUDIO OUT jacks on the DVD or Blu-ray player.
3.5mm audio
cable
connectors
VGA/DVI
AUDIO IN
jack
Back of TV
Note
When you connect the audio using the VGA/DVI AUDIO IN jack, the audio
output is analog.
HDMI cable with
HDMI-DVI adapter
3.5mm audio
cable
19
5 Plug your TV’s power cord into a power outlet, then turn on your TV.
6 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the
documentation that came with the player.
7 Press INPUT to open the INPUT SOURCE list.
8 Press
S
or T to select HDMI 3, then press ENTER.
www.insigniaproducts.com
Insignia 32" LED TV
Using component video (better)
Note
Cables are often color-coded to match color-coded jacks.
On your TV
DVD or Blu-ray player
Component
video cable
connectors
Analog audio
cable
connectors
Audio cable
Component video cable
Component
video jacks
Analog
audio jacks
Back of TV
To connect a DVD or Blu-ray player using component video:
1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect a component video cable (not provided) to the COMPONENT/AV Y/VIDEO, P
B
, and PR jacks on the
back of your TV and to the COMPONENT OUT jacks on the DVD or Blu-ray player.
3 Connect an audio cable (not provided) to the COMPONENT/AV L/R audio jacks on the back of your TV and to
the L/RAUDIO OUT jacks on the DVD or Blu-ray player.
Notes
•The COMPONENT/AV Y/VIDEO, P
B
, and PR video jacks (used to connect
a component device) share the L and R audio jacks with the
COMPONENT/AV Y/VIDEO jack (used to connect a composite device).
• When you connect the audio using the L and R audio jacks, the audio
output is analog.
4 Plug your TV’s power cord into a power outlet, then turn on your TV.
5 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the
documentation that came with the player.
6 Press INPUT to open the INPUT SOURCE list.
7 Press
S
or T to select Component/AV, then press ENTER.
www.insigniaproducts.com
20
Using composite video (good)
Notes
• Cables are often color-coded to match color-coded jacks.
• The yellow video connector on the AV cable connects to the green
COMPONENT/AV Y/VIDEO jack.
On your TV
NS-32E400NA14 Insignia 32" LED TV
DVD or Blu-ray player
Composite
video cable
connector
Composite
video jack
To connect a DVD or Blu-ray player using composite video:
1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an AV cable (not provided) to the COMPONENT/AV Y/VIDEO jack and L and R audio jacks on the back
of your TV and to the AV OUT jacks on the DVD or Blu-ray player.
Analog audio
cable
connectors
AV cable (composite video cable)
Analog audio
jacks
Back of TV
Notes
•The COMPONENT/AV Y/VIDEO, P
a component device) share the L and R audio jacks with the
COMPONENT/AV Y/VIDEO jack (used to connect a composite device).
• When you connect the audio using the L and R audio jacks, the audio
output is analog.
B
, and PR video jacks (used to connect
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the
documentation that came with the player.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
S
or T to select Component/AV, then press ENTER.
21
www.insigniaproducts.com
Loading...
+ 58 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.