Inovonics FA209 User Manual

FA209

!!!!

Frequency Agile

BilltrapTransmitter

Installation Instructions

02109C

Important Notes

These products are designed to be ins talled and maintained

!"

by professional securit y t echnicians.
Products, unless specifically noted, are intended for indoor use.

!"

Manually test all products regularl y.

!"

© 1995 Inovonics Wireless Corporation

315 CTC Blvd, Louisville CO 80027

E-mail: [e-mail]

02109C.DOC LIT-FA209-INSTALL hc:8-Aug-01

[phone]

FAX [phone]

www.inovonics.com

900MHz

FA209 Billtrap Operation

The FA209 billtrap transmitter is designed to be used in retail and banking cash drawers.
When the trigger bill is rem oved, t he billtrap will send an alarm transmission. The user can
opt for instant or delayed trans mission of the alarm.

Hook and loop mounting square

Billtrap

FA209 Installation

1. Remove bottom plate.

DELAY SELECTOR

2. Set

3. Program transmitter.

4. When programm i ng i s complete, disconnect cable and re-attach bot t om plate.

5. Mount the billtrap in the cash drawer using hook and loop square provided, or other means.

6. Place trigger bill in the billtrap.

jumper.

FA209

Billtrap Transmitter

TAMPER BUTTON

DELAY SELECTOR

3V

3V

PROGRAMMING
HEADER

RESET BUTTON

Delay Selector Settings

Placement of the selector jumper determines whether or not the transmitter will delay before
sending an alarm. The delay lets users quickly replace the trigger bill if it has inadvertently
been removed from the billtrap. With the jumper in the delay posit ion, the alarm will be
delayed for 7 to 13 seconds. NOTE: Ins tant response time will be 0 to 2.4 sec onds.

10 SECOND DELAY

INSTANT ALARM

FA209 Specifications

Program contacts: N/O
EOL: No
Internal Contacts: No
Typical battery life: 1-2 yrs @ 60-second* check-in
Battery (BAT609): 3.0V lithium CR2450N, quant i ty 2

Dimensions: 6.188" x 2.625" x .750"

* NOTE: The FA209 doubles the programmed check-in interval, resulting in extended battery life. A uni t programmed

for 60-second check-in will actually send a check-in round every 120 seconds.

(Batteries always supervis ed)

FA209 Programming

1. When prompted t o pl ug i n transmitter, connect cable from programming device to
programming header on transmitter.

2. Press reset button on transmitter.

3. When programm i ng i s complete, disconnect cable.

NOTE: The FA209 retains programming data in non-volatile memory. It does not
require re-programming after loss of power. Instal l new batteries and press reset
button to re-initialize the transmitter and restore programming.

ATTENTION: Test the transmitter at least once each week. See warranty.

Warranty & Disclaimer

Inovonics Wireless Corporation ("Inovonics") warrants its products ("Product" or
"Products") to conform to its own specifications and to be free of defects in
materials and workmanship under normal use for a period of twenty-four (24)
months from the date of manufacture. Within the warranty period Inovonics will
repair or replace, at its option, all or any part of the warrantied product. Inovonics
will not be responsible for dismantling and/or reinstallation charges. To exercise the
warranty, the User ("User", "Installer" or "Consumer") must be given a Return
Material Authorization ("RMA") Number by Inovonics. Details of shipment will be
arranged at that time.

This warranty does not apply in cases of improper installation, misuse, failure to
follow installation and operating instructions, alteration, abuse, accident or
tampering, and repair by anyone other than Inovonics.

This warranty is exclusive and expressly in lieu of all other warranties, obligations or
liabilities, whether written, oral, express, or implied, including any warranty of
merchantability or fitness for a particular purpose. Inovonics will not be liable to
anyone for any consequential or incidental damages for breach of this warranty or
any other warranties.

This warranty will not be modified, varied or extended. Inovonics does not authorize
any person to act on its behalf to modify, vary or extend this warranty. This warranty
will apply to Inovonics Products only. All other products, accessories or
attachments used in conjunction with Inovonics equipment, including batteries, will
be covered solely by their own warranty, if any. Inovonics will not be liable for any
direct, incidental or consequential damage or loss whatsoever, caused by the
malfunction of Product due to products, accessories, or attachments of other
manufacturers, including batteries, used in conjunction with Inovonics Products.

This warranty does not warrant the replacement of batteries that are used to power
Inovonics Products.

The User recognizes that a properly installed and maintained security system may
only reduce the risk of events such as burglary, robbery, personal injury and fire. It
does not insure or guarantee that there will be no death, personal damage and/or
damage to property as a result.

Inovonics does not claim that the Product may
not be compromised and/or circumvented, or that the Product will prevent
any death, personal and/or bodily injury and/or damage to property resulting
from burglary, robbery, fire or otherwise, or that the Product will in all cases
provide adequate warning or protection.

Warranty & Disclaime r (Continued)

Inovonics shall have no liability for any death, injury or damage, however
incurred, based on a claim that Inovonics Products failed to function.

However, if Inovonics is held liable, directly or indirectly, for any loss or damage
arising under this limited warranty or otherwise, regardless of cause or origin,
Inovonics' maximum liability will not in any case exceed the purchase price of
the Product, which will be fixed as liquidated damages and not as a penalty, and
will be the complete and exclusive remedy against Inovonics.

Warning: The User should follow all installation, operation and
maintenance instructions.

The User is strongly advised to conduct Product
and systems tests at least once each week. Changes in environmental
conditions, electric or electronic disruptions and tampering, may cause the
Product to not perform as expected.

Warning: Inovonics warrants its Product to the User.

The User is
responsible for exercising all due prudence and taking necessary precautions
for the safety and protection of lives and property wherever Inovonics Products
are installed. Inovonics strongly advises the User to program Products to be
supervised whenever used in applications affecting life safety. Users are
warned that unsupervised devices are subject to undetected failure due to
malfunction, battery failure, tampering, or changes in environment.

Additional

FA200
FA200W
FA202
FA204
FA206
FA207
FA209M
FA209S
FA210
FA210W

Frequency Agile

®

universal transmitter
universal widegap transmitter
smoke detector
pendant transmitter
PIR motion detector
glassbreak detector
dual billtrap transmitter (master)
dual billtrap transmitter (slave)
(reduced size) universal transmitter
(reduced size) universal widegap transmitter

wireless transmitt ers from

Inovonics

include: