Ingersoll-Rand CA Series, CA200RS418, CA120RS812, CA200RS812, CA120RS818 Product Information
...
Air Belt Sanders
CA Series (Angle)
Product Information
EN
Product Information
ES
Especificaciones del producto
FR
Spécifications du produit
PT
Especificações do Produto
80154719
Edition 1
December 2005
Save These Instructions
10
8h
(Dwg. 16577249)
PMAX
3
9
48h
2
1
4
8
7
24h
5
6
3
1
2
I-R # - NPT I-R # - BS inch (mm) NPT I-R # I-R # I-R #
C28231-800 C18-C3-FGGO-29 5/16 (8) 1/4 MSCF32 10 67 1
5
6 7
9
10
cm
2 80154719_ed1
3
EN
Product Safety Information
Intended Use:
These Air Belt Sanders are designed for light sanding such as smoothing edges and welds.
For additional information refer to Product Safety Information Manual Form 04584942.
Manuals can be downloaded from www.irtools.com.
Product Specifications
Model(s)
CA120RS812 12 x 1/2 (305 x 13) 12,000 2,700
CA120RS418 18 x 1/4 (457 x 6) 12,000 2,700
CA120RS818 18 x 1/2 (457 x 13) 12,000 2,700
CA200RS812 12 x 1/2 (305 x 13) 20,000 4,500
CA200RS418 18 x 1/4 (457 x 6) 20,000 4,500
CA200RS818 18 x 1/2 (457 x 13) 20,000 4,500
Installation and Lubrication
Size air supply line to ensure tool's maximu m operating pressure (PMAX) at tool inlet. Drain condensate from
valve(s) at low point(s) of piping, air filter a nd compressor tank daily. Install a properly sized Safety Air Fuse
upstream of hose and use an anti-whip device acr oss any hose coupling without internal shut-off, to prevent
hose whipping if a hose fails or coupling disconnects. See drawing 16577249 and table on page 2.
Maintenance frequency is shown in circular arrow and defined as h=hours, d=days, and m=months. Items
identified as:
1. Air filter 6. Thread size
2. Regulator 7. Coupling
3. Lubricator 8. Safety Air Fuse
4. Emergency shut-off valve 9 Oil
5. Hose diameter 10. Grease
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and parts
be separated by material so that they can be recycle d.
The original language of this manual is Engli sh.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll-Rand Office or Distributor.
Belt Size Arbor Speed Belt Speed
inch (mm) rpm sfpm
80154719_ed1 EN-1
Loading...