Reciprocating Air Saw
Model 429G
Product Information
EN
Product Information
ES
Especicaciones del producto
FR
Spécications du produit
45661188
Edition 1
August 2009
Save These Instructions
4
7
5
3
2
1
9
48h
9
48h
24h
8
6
PMAX
(Dwg. 16585382)
IR # - NPT inch (mm) NPT IR #
C38121-600-VS 1/4 (6) 1/4 10
2 45661188_ed1
EN
Product Safety Information
Intended Use:
This Air Reciprocating Saw is designed for cutting plastics, berglass, composites,
aluminum and sheet metal.
For additional information refer to Air Reciprocating Saw Product Safety Information
Manual Form 16578809.
Manuals can be downloaded from www.ingersollrandproducts.com.
Product Specications
Strokes Per
Minute
Model
429G 10000 0.39 10 8 226 9 255
Model
429G 1.4 0.6 9.1 231 84.3 95.3 18.1
† KpA = 3dB measurement uncertainty
‡ KwA = 3dB measurement uncertainty
spm Inch mm cfm l/min cfm l/min
Tool Weight
lbs Kg inch mm † Pressure (LP) ‡ Power (LW) m/s
Stroke Length Avg. Air Consumption
Length without
Blade
Sound Level dB (A)
(ISO15744)
Installation and Lubrication
Size air supply line to ensure tool’s maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air lter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-o, to prevent hose whipping if a hose fails or coupling disconnects. See drawing 16585382 and table on page 2. Maintenance frequency is shown in circular
arrow and dened as h=hours, d=days, and m=months. Items identied as:
1. Air lter 6. Thread size
2. Regulator 7. Coupling
3. Lubricator 8. Safety Air Fuse
4. Emergency shut-o valve 9. Oil
5. Hose diameter
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Oce or Distributor.
45661188_ed1 EN-1
Air Consumption
@ Load
Vibration Level
(ISO8662)
2