Ingersoll-Rand 21515, 2150 User Manual
2150 and 2151S Air Impact Wrench Exploded Diagram
16
17
10
11
9
14
15
14
13
18
19
3
2
5
6
46
1
4
7
42
43
45
21
22
20
12
23
34
35
8
37
38
36
26
25
24
33
32
31
30
29
28
27
40
41
39
(Dwg. TP1989)
04584082
Edition 3
April 2008
2150 and 2151S Air Impact Wrench Parts List
Item Part Description Part Number Item Part Description Part Number
1 Cylinder 2141-3 25 Inlet Bushing Screen 5RA-61
2 Front End Plate 2141-11 26 Inlet Retainer Clip 2141-57
3 Front Rotor Bearing R38P-606 27 Inlet Parts Kit 2141-K303
4 Rear Rotor Bearing 2131-97 28 Inlet Bushing Seal R4-210
• 5 Vane Packet (set of 6 Vanes) 2141-42-6 29 Tilt Valve Spring 2131-51
6 Rotor 2141-53 30 Tilt Valve 2141-302
7 Rear Rotor Bearing Retainer 2131-6 31 Tilt Valve Seat 2141-303
• 8 Motor Gasket 2141-283 32 Tilt Valve Seat Support 2141-306
9 Anvil Assembly 2150-A726 33 Tilt Valve Seat Retainer SML8-24
• 10 Socket Retainer 910E5-918 • 34 Trigger Assembly 2141-A93
• 11 Socket Retainer O-ring BBFM-557 35 Trigger O-ring --12 Hammer Case Screw (4) 2141-638 36 Reverse Valve Assembly 2141-A329
Hammer Frame Assembly 2141-A703 37 Reverse Valve O-ring (top) --13 Hammer Frame 2141-703 38 Reverse Valve O-ring (bottom) (blue) --14 Hammer Pin (2) 2141-704 39 Button Kit 2141-K75
15 Hammer (2) 2141-724 40 Forward Button --16 Hammer Case Assembly (2150) 2141P3-A727 41 Reverse Button ---
Hammer Case Assembly (2151S) 2151-A727 42 Power Management Dial 2131-A249
17 Hammer Case Bushing (2150) VW-1136 43 Power Management Dial Seal ---
Hammer Case Bushing (2151S) 2151-641 44 Silencer (2) (2151S only) 2131S-310
18 Grease Fitting D0F9-879 45 Exhaust Silencer (2151S only) 2131S-311
• 19 Hammer Case Gasket 2141-36 * Inlet Clip Removal Tool 2131-322
20 Housing Assembly (2150) 2141-A40 * Grease (1 lb) (for external lubrication of the
Housing Assembly (2151S) 2151S-A40 impact mechanism)
21 Housing Label (2150) 2141-99 * Grease (for lubrication when disassembling
Housing Label (2151S) 2151S-300 and assembling the impact mechanism)
22 Warning Label WARNING-2-99 1 lb 105-1LB
23 Nameplate (2151S) 2151S-301 8 lb 105-8LB
23 Nameplate (2150) 2150-301 * Protective Cover 2141-P32
Inlet Bushing Assembly 2141-D565 * Grease Gun R000A2-228
24 Inlet Bushing 2141-565
* Not illustrated.
• To keep downtime to a minimum, it is desirable to have on hand certain repair parts. We recommend that you stock one (pair or set) of each
part indicated by a Bullet (•) for every four tools in service.
115-1LB
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and parts be separated by material so
that they can be recycled.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Oce or Distributor.
Related Documentation
For additional information refer to:
Air Impact Wrench Product Safety Information Manual 04580916.
Air Impact Wrench Product Information Manual 04584710.
Air Impact Wrench Maintenance Information Manual Form 04584074.
Manuals can be downloaded from www.irtools.com.
www.irtools.com
© 2008 Ingersoll Rand Company
04584082
Edition 3
April 2008
Loading...