Ingersoll-Rand 1770G, 170G User Manual
Air Ratchet Wrench
Model 170G and 1770G
Product Information
EN
Product Information
ES
Especicaciones del producto
FR
Spécications du produit
45661204
Edition 1
September 2009
Save These Instructions
4
7
5
3
2
1
9
6
12
11
48h
3m
6m
PMAX
30d
24h
8
10
1
3
2
5
6
9
10
11
12
(Dwg. 16571804-2)
IR # - NPT inch (mm) NPT IR # IR # cm3IR # cm3IR # cm
C38121-600-VS 3/8 (10) 1/4 10 70 1 70 2 67 1
2 45661204_ed1
3
EN
Product Safety Information
Intended Use:
These Air Ratchet Wrenches are designed to remove and install threaded fasteners.
For additional information refer to Air Ratchet Wrenches Product Safety Information
Manual Form 04580361.
Manuals can be downloaded from www.ingersollrandproducts.com.
Product Specications
Recommended
Drive
Model
170G 3/8” 10 - 55 14 - 75 55 75 170 3 85 20 566
1770G 1/2” 10 - 55 14 - 75 55 75 170 3 85 20 566
Model
170G 2.6 1.2 10.4 264 94.8 105.8 3.9
1770G 2.6 1.2 10.4 264 94.8 105.8 3.9
† KpA = 3dB measurement uncertainty
‡ KwA = 3dB measurement uncertainty
Torque Range
Size ft-lb Nm ft-lb Nm rpm cfm l/min cfm l/min
Tool Weight Overall Length
lbs Kg inch mm † Pressure (LP) ‡ Power (LW) m/s
Maximum
Installation and Lubrication
Size air supply line to ensure tool’s maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air lter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-o, to prevent hose whipping if a hose fails or coupling
disconnects. See drawing 16571804-2 and table on page 2. Maintenance frequency is shown in
circular arrow and dened as h=hours, d=days, and m=months. Items identied as:
1. Air lter 6. Thread size
2. Regulator 7. Coupling
3. Lubricator 8. Safety Air Fuse
4. Emergency shut-o valve 9. Oil
5. Hose diameter 10. Grease - through tting
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Oce or Distributor.
Torque
Average
Average Air
Free
Consumption
Speed
Sound Level dB (A)
(ISO15744)
Free Speed Air
Consumption
Vibration Level
(ISO8662)
2
45661204_ed1 EN-1
Loading...