Page 1
Multiple Spindle Fixtures
Parts Information
16607103
Edition 5
October 2008
Save These Instructions
Page 2
Double Tube Vertical Fixture Exploded Diagram
14
14A
14B
16
20
15
5
6
22A
22
7
11
10
12
21
105-125 Nm
(4 Places)
24
1.7-2.0 Nm
23
23A
23B
23C
19
1
(4 Places)
7
6
2
4
3
12-16 Nm
4
12-16 Nm
(4 Places)
5
9
13
5
25
17
17A
18
8
(Dwg. 16603730)
2 16607103_ed5
Page 3
Double Tube Vertical Fixture Parts List
Table-1
Item Description Part Number
1 Tube Elbow Joint QMM-712
2 Redundant Eye Assembly QMM-A463
3 Redundant Eye QMM-463-2
4 Cap Head Screw (M6 x 1 x 16) QMM-F1-638
5 Tube Holder Assembly QMM-A30
6 Tube- Standard 1 Meter QMM-809-1M
7 Tie Rod-Standard 1 Meter QMM-763-1M
8 Control Panel (See Table 10 for more details) ---
9 Handle (See Table 8 for more details) ---
10 Tube Bracket Vertical QMMV-601
11 Tube Bracket Horizontal QMM-601
12 Spherical Washer QMM-248
13 Control Panel Mount Assembly QMML-A763
14 Suspension Joint-100 Nm QMM-TA
14A Suspension Joint-500 Nm QMM-TAA
14B Suspension Joint-Eye Bolt QMM-T
15 Ball End Shaft QMM-221-763
16 Cable Tray QMM-221
17 Ball to Ball Shaft-Short QMM-696-100
17A Ball to Ball Shaft-Long QMM-696-200
18 Flat/Tube Holder Assembly QMM-A208
19 Cotter Pin QMM-15
20 Lock Nut QMM-582
21 Hex. Nut (M12 x 1.75) QMM-H1-638
22 QMM Warning Label QMM-99
22A QMM Branding Label QMM-301
23 POD Mounting Bracket for Tube QMM-765-T
23A POD Mounting Bracket for QM9 Motor QMM-765-9
23B POD Mounting Bracket for QM7 Motor QMM-765-7
23C POD Mounting Bracket for QM5 Motor QMM-765-5
24 Cap Head Screw (M3 x 0.5 x 16) QMM-765-638
*25 Retractable Strap (120 Kg Max.) QMM-298
* Optional
16607103_ed5 3
Page 4
Single Tube Vertical Fixture Exploded Diagram
31
15
16
20
15
5
6
7
10
12
21
32
9
23
23A
23B
23C
8
5
17
17A
18
24
1.7-2.0 Nm
18
19
4
12-16 Nm
(4 Places)
11
18
13
22
22A
105-125 Nm
(4 Places)
(Dwg. 16605271)
4 16607103_ed5
Page 5
Single Tube Vertical Fixture Parts List
Table-2
Item Description Part Number
4 Cap Head Screw (M6 x 1 x 16) QMM-F1-638
5 Tube Holder Assembly QMM-A30
6 Tube-Standard 1 Meter QMM-809-1M
7 Tie Rod-Standard 1 Meter QMM-763-1M
8 Control Panel (See Table 10 for more details) ---
9 Handle (See Table 8 for more details) ---
10 Tube Bracket Vertical QMMV-601
11 Tube Bracket Horizontal QMM-601
12 Spherical Washer QMM-248
13 Control Panel Mount Assembly QMML-A763
15 Ball End Shaft QMM-221-763
16 Cable Tray QMM-221
17 Ball to Ball Shaft-Short QMM-696-100
17A Ball to Ball Shaft-Long QMM-696-200
18 Flat/Tube Holder Assembly QMM-A208
19 Cotter Pin QMM-15
20 Lock Nut QMM-582
21 Hex. Nut (M12 x 1.75) QMM-H1-638
22 QMM Warning Label QMM-99
22A QMM Branding Label QMM-301
23 POD Mounting Bracket for Tube QMM-765-T
23A POD Mounting Bracket for QM9 Motor QMM-765-9
23B POD Mounting Bracket for QM7 Motor QMM-765-7
23C POD Mounting Bracket for QM5 Motor QMM-765-5
24 Cap Head Screw (M3 x 0.5 x 16) QMM-765-638
31 Eye Bolt (M12 x 1.75) QMM-34
32 Plate Holder Assembly QMM-A293
16607103_ed5 5
Page 6
Horizontal Rotate Exploded Diagram
View 2
View 1
116
30-35 Nm
(10 Places)
(Dwg. 16604854_SH1)
6 16607103_ed5
Page 7
Horizontal Rotate Exploded Diagram View-1
17
17A
18
8
18
21
21
105-125 Nm
21
12
10
114
119
103
103A
104
104A
105
105A
18
9
32
12
16
20
15
106
119
60-70 Nm
(6 Places)
60-70 Nm
(2 Places)
4
12-16 Nm
22
22A
108
2
7
5
3
113
13
14A
14B
14
25
105-125 Nm
105-125 Nm
(Dwg. 16604854_SH2)
16607103_ed5 7
Page 8
Horizontal Rotate Exploded Diagram View-2
112
112A
107
107A
5
7
6
231
11
30-35 Nm
(10 Places)
12
21
105-125 Nm
(6 Places)
109
109A
4
12-16 Nm
(24 Places)
117
1.7-2.0 Nm
101
60-70 Nm
(12 Places)
23
23A
23B
23C
110
111
24
(Dwg.16604854_SH3)
8 16607103_ed5
Page 9
Horizontal Rotate Parts List
Table-3
Item Description Part Number
2 Redundant Eye Assembly QMM-A463
3 Redundant Eye QMM-463-2
4 Cap Head Screw (M6 x 1 x 16) QMM-F1-638
5 Tube Holder Assembly QMM-A30
6 Tube- Standard 1 Meter QMM-809-1M
7 Tie Rod-Standard 1 Meter QMM-763-1M
8 Control Panel (See Table 10 for more details) ---
9 Handle (See Table 8 for more details) --10 Tube Bracket Vertical QMMV-601
11 Tube Bracket Horizontal QMM-601
12 Spherical Washer QMM-248
13 Control Panel Mount Assembly QMML-A763
14 Suspension Joint-100 Nm QMM-TA
14A Suspension Joint-500 Nm QMM-TAA
14B Suspension Joint-Eye Bolt QMM-T
15 Ball End Shaft QMM-221-763
16 Cable Tray QMM-221
17 Ball to Ball Shaft-Short QMM-696-100
17A Ball to Ball Shaft-Long QMM-696-200
18 Flat/Tube Holder Assembly QMM-A208
20 Lock Nut QMM-582
21 Hex. Nut (M12 x 1.75) QMM-H1-638
22 QMM Warning Label QMM-99
22A QMM Branding Label QMM-301
23 POD Mounting Bracket for Tube QMM-765-T
23A POD Mounting Bracket for QM9 Motor QMM-765-9
23B POD Mounting Bracket for QM7 Motor QMM-765-7
23C POD Mounting Bracket for QM5 Motor QMM-765-5
24 Cap Head Screw (M3 x 0.5 x 16) QMM-765-638
*25 Retractable Strap (120 Kg Max.) QMM-298
32 Plate Holder Assembly QMM -A293
101 Corner Spacer-1 Meter QMM-93-1M
103 Back Plate for Small Bearing Assembly QMMR-28C
103A Back Plate for Large Bearing Assembly QMMR-28
104 Back Plate Rib for Small Bearing Assembly QMMR-767C
104A Back Plate Rib for Large Bearing Assembly QMMR-767
105 Redundant Back Plate for Small Bearing Assembly QMMR-765C
105A Redundant Back Plate for Large Bearing Assembly QMMR-765
106 Suspension Tube Bracket QMM-602
107 Circular Handle for Small Bearing Assembly QMMR-A48C
107A Circular Handle for Large Bearing Assembly QMMR-A48
108 Suspension Tube-Standard 1 Meter QMM-810-1M
109 Small Bearing Assembly QMMR-A24C
109A Large Bearing Assembly QMMR-A24
110 Channel Nut (M6) QMMR-A305
111 Button Head Screw (M6) QMMR-638
112 Grip-Circular Handle for Small Bearing Assembly QMMR-144GC
112A Grip-Circular Handle for Large Bearing Assembly QMMR-144G
113 Tube End Cap QMM-202
114 Suspension Support QMMR-766
116 Cap Head Screw (M8 x 1.25 x 25) QMM-T6-638
117 Cap Head Screw (M10 x 1.5 x 25) QMM-F8-638
119 Cap Head Screw (M10 x 1.5 x 35) QMM-F10-638
231 Cap Head Screw (M8 x 1.25 x 20) QMM-T3-638
* Optional
16607103_ed5 9
Page 10
Bearing Assembly Exploded Diagram
231
206
4
209
207
203
204
205
204
208
202
204
205
204
201
116
231
30-35 Nm
(10 Places)
30-35 Nm
(10 Places)
4 (12-16 Nm)
115 (30-35 Nm)
(4 Places)
12-16 Nm
(2 Places)
(Dwg. 16608945)
□ Apply Grease IR # 222
Bearing Assembly Parts List
Table-4
Item Description
* Bearing Assembly QMMR-A24C QMMR-A24
4 Cap Head Screw (M6 x 1 x 16) QMM-F1-638 QMM-F1-638
115 Cap Head Screw (M8 x 1.25 x 16) --- QMM-F2-638
116 Cap Head Screw (M8 x 1.25 x 25) --- QMM-T6-638
201 Side Housing QMMR-24-41-C QMMR-24-41
202 Rotating Part QMMR-24-53-C QMMR-24-53
203 Housing Main QMMR-24-40-C QMMR-24-40
204 Thin Thrust Washer QMMR-246-C QMMR-246
205 Thrust Bearing QMMR-24- C QMMR-24
206 Needle Cage Bearing QMMR-25-C QMMR-25
207 Stationary Stop Part QMM-373-C QMM-373
208 Rotary Stop Part QMM-729- C QMM-729
209 Nylon Contact for Stop Mechanism QMM-47 QMM-47
231 Cap Head Screw (M8 x1.25 x 20) QMM-T3-638 QMM-T3-638
10 16607103_ed5
Small Bearing Assembly Large Bearing Assembly
Part Number
Page 11
Suspension Assemblies Exploded Diagram
232
227
231
228
233
222
223
229
221
QMM-T
231
224
31
19
116
30-35 Nm
(4 Places)
30-35 Nm
(4 Places)
35-40 Nm
(4 Places)
30-35 Nm
(4 Places)
30-35 Nm
(4 Places)
225
226
230
QMM-TA
QMM-TAA
(Dwg. 16609075)
Suspension Assemblies Parts List
Table-5
Item Description
* Suspension Assembly QMM-T QMM-TA QMM-TAA
19 Cotter Pin QMM-15 --- --31 Eyebolt M12 x 1.75 QMM-34 --- ---
116 Cap Head Screw (M8 x 1.25 x 25) QMM-T6-638 --- --221 Adaptor Top Plate-100 --- QMM-T1 --222 Tube Shuttle QMM-T2 QMM-T2 QMM-T2
223 Suspension Holder QMM-T3 QMM-T3 QMM-T3
224 Adaptor Middle Plate-100 --- QMM-T4 --225 Adaptor Plate Eye QMM-T5 --- --226 Spacer QMM-T6 --227 Adaptor Top Plate-500 --- --- QMM-T7
228 Adaptor Middle Plate-500 --- --- QMM-T8
Suspension Joint
with Eye Bolt
Suspension Joint with
IR Torque Tube 100 Nm
Part Number
Suspension Joint with
IR Torque Tube 500 Nm
229 Hex. Head Bolt (M8 x 1.25 x 25) --- QMM-T1-638 --230 Hex. Nut (M8 x 1.25) --- QMM-T4-638 ----231 Cap Head Screw (M8 x 1.25 x 20) --- QMM-T3-638 QMM-T3-638
232 Hex. Head Bolt (M10 x 1.5 x 30) --- --- QMM-T7-638
233 Hex. Nut (M10 x 1.5) --- --- QMM-T8-638
16607103_ed5 11
Page 12
Ball Holder Assemblies
251
253
254
255
256
QMM-A30
257
12-16 Nm
(4 Places)
QMM-A208
257
256
254
253
263
252
12-16 Nm
(4 Places)
12 -16 Nm
(4 Places)
Tube Holder Assembly Exploded Diagram
(Dwg. 16608986)
Flat/Tube Holder Assembly Exploded Diagram
(Dwg. 16608952)
12 16607103_ed5
Page 13
Plate Holder Assembly Exploded Diagram
QMM-A293
260
258
259
12-16 Nm
(3 Places)
(Dwg. 16608937)
Ball Holder Assemblies Parts List
Table-6
Item Description Part Number
* Holder Assembly QMM-A30 QMM-A208 QMM-A293
251 Holder QMM-208-2 --- ---
252 Tube End Holder --- QMM-208-1 ---
253 Nut Plate QMM-338 QMM-338 ---
254 Internal Ring Round Wire QMM-18 QMM-18 ---
255 Ball Shuttle QMM-30 QMM-30 ---
256 Socket Ring QMM-118 QMM-118 ---
257 Cap Head Screw (M6 x 1 x 30) QMM-F6-638 QMM -F6-638 ---
258 Plate to Ball-Top --- --- QMM-293-1
259 Plate to Ball-Bottom --- --- QMM-293-2
260 Cap Head Screw (M6 x 1 x 35) --- --- QMM-F7-638
263 Cap Head Screw (M6 x 1 x 20) --- QMM-F4-638 ---
16607103_ed5 13
Page 14
Control Panel Mount Assembly Exploded Diagram
364
12-16 Nm
(2 Places)
12-16 Nm
(2 Places)
12-16 Nm
362
364
364
361
QMML-A763
(Dwg. 16608978)
Control Panel Mount Assembly Parts List
Table-7
Item Description Part Number
Flat Holder Assembly QMML-A763
361 Control Panel Mount Plate QMML-118
362 Control Panel Mount Tube Holder QMML-763
364 Cap Head Screw (M6 x 1 x 15) QMM-F5-638
14 16607103_ed5
Page 15
QMM Handle Assembly Exploded Diagram
314
315
116
315
116
319
308
307
306
306
303
301
302
1.7-2.0 Nm
(4 Places)
304
323
305
321
309
4.2-4.5 Nm
263
318
263
318
263
318
317
310
312
311
313
320
322
322A
322B
12-16 Nm
(4 Places)
12-16 Nm
(4 Places)
12-16 Nm
(4 Places)
30-35 Nm
30-35 Nm
309
4.2-4.5 Nm
(Dwg. 16602930)
□ Apply Serviceable Thread Locker
16607103_ed5 15
Page 16
QMM Handle Parts List
Handle Assembly with Ball Joint Mounting Options
(Refer PI manual #16607228 for detailed description on handle congurations)
Table-8.1
Item Description Part Number
* Handle Assembly QMMHB QMMHBT QMMHBD QMMHBM
116 Cap Head Screw (M8 x 1.25 x 25) QMM-T6-638 QMM-T6-638 QMM-T6-638 QMM-T6-638
263 Cap Head Screw (M6 x 1 x 20) QMM-F4-638 QMM -F4-638 --- --301 Handle Label Kit QMMH-301 QMMH-301 QMMH-301 QMMH-301
302 Cap Head Screw (M3 x 0.5 x 8) QMMH-CAP-638 QMMH-CAP-638 QMMH-CAP-638 QMMH-CAP-638
303 Handle End Cap QMMH-202 QMMH-202 QMMH-202 QMMH-202
304 Grip-Throttle Handle --- GEA40-135 --- --305 Handle Main PCB Assembly --- QMMH-A499-2 QMMH-A499-2 QMMH-A499-2
306 Spring --- GEA40-273-51 --- --307 Trigger --- GEA40-273 --- --308 Grip-Dead Handle QMMH-40-135 --- QMMH-40-135 QMMH-40-135
309 Low Cap Head Screw (M4 x 0.7 x 30) QMMH-GRIP-638 QMMH-GRIP-638 QMMH-GRIP-638 QMMH-GRIP-638
310 Switch Assembly-Momentary --- --- --- QMMH-1-D74
311 Switch Assembly-Detent --- --- QMMH-1-D75 --312 Strain Reliever --- QMMH-565 QMMH-565 QMMH-565
313 Bracket-Throttle Handle --- QMMH-900 QMMH-900 QMMH-900
314 Bracket-Dead Handle QMMH-900-D --- --- --315 End Ball QMMH-629 QMMH-629 QMMH-629 QMMH-629
317 Handle Flat Mount Flange --- --- --- --318 Cap Head Screw (M6 x 1 x 45) --- --- QMM-F11-638 QMM-F11-638
319 Receptacle --- QMMC-45 QMMC-45 QMMC-45
320 Plug-(Cord Length 2 Meter) --- QMMC-56 QMMC-56 QMMC-56
321 Handle Grip Housing QMMH-40 QMMH-40 QMMH-40 QMMH-40
323 Cable Tie --- EE9-200 EE9-200 EE9-200
Table-8.1 (Continued)
Item Description Part Number
* Handle Assembly QMMHBTDP QMMHBTDA QMMHBTMP QMMHBTMA
116 Cap Head Screw (M8 x 1.25 x 25) QMM-T6-638 QMM-T6-638 QMM-T6-638 QMM-T6-638
263 Cap Head Screw (M6 x 1 x 20) --- --- --- --301 Handle Label Kit QMMH-301 QMMH-301 QMMH-301 QMMH-301
302 Cap Head Screw (M3 x 0.5 x 8) QMMH-CAP-638 QMMH-CAP-638 QMMH-CAP-638 QMMH-CAP-638
303 Handle End Cap QMMH-202 QMMH-202 QMMH-202 QMMH-202
304 Grip-Throttle Handle GEA40-135 GEA40-135 GEA40-135 GEA40-135
305 Handle Main PCB Assembly QMMH-A499-2 QMMH-A499-2 QMMH-A499-2 QMMH-A499-2
306 Spring GEA40-273-51 GEA40-273-51 GEA40-273-51 GEA40-273-51
307 Trigger GEA40-273 GEA40-273 GEA40-273 GEA40-273
308 Grip-Dead Handle --- --- --- --309 Low Cap Head Screw (M4 x 0.7 x 30) QMMH-GRIP-638 QMMH-GRIP-638 QMMH-GRIP-638 QMMH-GRIP-638
310 Switch Assembly-Momentary --- --- QMMH-1-D74 QMMH-1-D74
311 Switch Assembly-Detent QMMH-1-D75 QMMH-1-D75 --- --312 Strain Reliever QMMH-565 QMMH-565 QMMH-565 QMMH-565
313 Bracket-Throttle Handle QMMH-900 QMMH-900 QMMH-900 QMMH-900
314 Bracket-Dead Handle --- --- --- --315 End Ball QMMH-629 QMMH-629 QMMH-629 QMMH-629
317 Handle Flat Mount Flange --- --- --- --318 Cap Head Screw (M6 x 1 x 45) QMM-F11-638 QMM-F11-638 QMM-F11-638 QMM-F11-638
319 Receptacle QMMC-45 QMMC-45 QMMC-45 QMMC-45
320 Plug-(Cord Length 2 Meter) QMMC-56 QMMC-56 QMMC-56 QMMC-56
321 Handle Grip Housing QMMH-40 QMMH-40 QMMH-40 QMMH-40
323 Cable Tie EE9-200 EE9-200 EE9-200 EE9-200
16 16607103_ed5
Page 17
QMM Handle Parts List
Handle Assembly with Flange Mounting Options
(Refer PI manual #16607228 for detailed description on handle congurations)
Table-8.2
Item Description Part Number
* Handle Assembly QMMHF QMMHFT QMMHFD QMMHFM
116 Cap Head Screw (M8 x 1.25 x 25) --- --- --- --263 Cap Head Screw (M6 x 1 x 20) QMM-F4-638 QMM-F4-638 --- --301 Handle Label Kit QMMH-301 QMMH-301 QMMH-301 QMMH-301
302 Cap Head Screw (M3 x 0.5 x 8) QMMH-CAP-638 QMMH-CAP-638 QMMH-CAP-638 QMMH- CAP-638
303 Handle End Cap QMMH-202 QMMH-202 QMMH-202 QMMH-202
304 Grip-Throttle Handle --- GEA40-135 --- --305 Handle Main PCB Assembly --- QMMH-A499-2 QMMH-A499-2 QMMH-A499-2
306 Spring --- GEA40-273-51 --- --307 Trigger --- GEA40-273 --- --308 Grip-dead Handle QMMH-40-135 --- QMMH-40-135 QMMH-40-135
309 Low Cap Head Screw (M4 x 0.7 x 30) QMMH-GRIP-638 QMMH- GRIP-638 QMMH-GRIP-638 QMMH-GRIP-638
310 Switch Assembly-Momentary --- --- --- QMMH-1-D74
311 Switch Assembly-Detent --- --- QMMH-1-D75 --312 Strain Reliever --- --- --- --313 Bracket-Throttle Handle --- --- --- --314 Bracket-Dead Handle --- --- --- --315 End Ball --- --- --- --317 Handle Flat Mount Flange QMMH-35 QMMH-35 QMMH-35 QMMH-35
318 Cap Head Screw (M6 x 1 x 45) --- --- QMM-F11-638 QMM-F11-638
319 Receptacle --- QMMC-45 QMMC-45 QMMC-45
320 Plug-(Cord Length 2 Meter) --- QMMC-56 QMMC-56 QMMC-56
321 Handle Grip Housing QMMH-40 QMMH-40 QMMH-40 QMMH-40
323 Cable Tie --- EE9-200 EE9-200 EE9-200
Table-8.2 (Continued)
Item Description Part Number
* Handle Assembly QMMHFTDP QMMHFTDA QMMHFTMP QMMHFTMA
116 Cap Head Screw (M8 x 1.25 x 25) --- --- --- --263 Cap Head Screw (M6 x 1 x 20) --- --- --- --301 Handle Label Kit QMMH-301 QMMH-301 QMMH-301 QMMH-301
302 Cap Head Screw (M3 x 0.5 x 8) QMMH-CAP-638 QMMH-CAP-638 QMMH-CAP-638 QMMH- CAP-638
303 Handle End Cap QMMH-202 QMMH-202 QMMH-202 QMMH-202
304 Grip-Throttle Handle GEA40-135 GEA40-135 GEA40-135 GEA40-135
305 Handle Main PCB Assembly QMMH-A499-2 QMMH-A499-2 QMMH-A499-2 QMMH-A499-2
306 Spring GEA40-273-51 GEA40-273-51 GEA40-273-51 GEA40-273-51
307 Trigger GEA40-273 GEA40-273 GEA40-273 GEA40-273
308 Grip-Dead Handle --- --- --- --309 Low Cap Head Screw (M4 x 0.7 x 30) QMMH-GRIP-638 QMMH- GRIP-638 QMMH-GRIP-638 QMMH-GRIP-638
310 Switch Assembly-Momentary --- --- QMMH-1-D74 QMMH-1-D74
311 Switch Assembly-Detent QMMH-1-D75 QMMH-1-D75 --- --312 Strain Reliever --- --- --- --313 Bracket-Throttle Handle --- --- --- --314 Bracket-Dead Handle --- --- --- --315 End Ball --- --- --- --317 Handle Flat Mount Flange QMMH-35 QMMH-35 QMMH-35 QMMH-35
318 Cap Head Screw (M6 x 1 x 45) QMM -F11-638 QMM-F11-638 QMM-F11-638 QMM-F11-638
319 Receptacle QMMC-45 QMMC-45 QMMC-45 QMMC-45
320 Plug-(Cord Length 2 Meter) QMMC-56 QMMC-56 QMMC-56 QMMC-56
321 Handle Grip Housing QMMH-40 QMMH-40 QMMH-40 QMMH-40
323 Cable Tie EE9-200 EE9-200 EE9-200 EE9-200
16607103_ed5 17
Page 18
QMM Handle Parts List
Handle Assembly with Body Mount Options
(Refer PI manual #16607228 for detailed description on handle congurations)
Table-8.3
Item Description Part Number
* Handle Assembly QMMH QMMHT
116 Cap Head Screw (M8 x 1.25 x 25) --- ---
263 Cap Head Screw (M6 x 1 x 20) QMM-F4-638 QMM-F4-638
301 Handle Label Kit QMMH-301 QMMH-301
302 Cap Head Screw (M3 x 0.5 x 8) QMMH-CAP-638 QMMH-CAP-638
303 Handle End Cap QMMH-202 QMMH-202
304 Grip-Throttle Handle --- GEA40-135
305 Handle Main PCB Assembly --- QMMH-A499-2
306 Spring --- GEA40-273-51
307 Trigger --- GEA40-273
308 Grip-Dead Handle QMMH-40-135 ---
309 Low Cap Head Screw (M4 x 0.7 x 30) QMMH-GRIP-638 QMMH- GRIP-638
310 Switch Assembly-Momentary --- ---
311 Switch Assembly-Detent --- ---
312 Strain Reliever --- ---
313 Bracket-Throttle Handle --- ---
314 Bracket-Dead Handle --- ---
315 End Ball --- ---
317 Handle Flat Mount Flange --- ---
318 Cap Head Screw (M6 x 1 x 45) --- ---
319 Receptacle --- QMMC-45
320 Plug-(Cord Length 2 Meter) --- QMMC-56
321 Handle Grip Housing QMMH-40 QMMH-40
323 Cable Tie --- EE9-200
Accessories (Handle Extension Cable)
Table-8.4
Item Description Part Number
322 Handle Extension Cordset ( 2 Meter) QMMC-46-2M
322A Handle Extension Cordset (4 Meter) QMMC-46-4M
322B Handle Extension Cordset (6 Meter) QMMC-46-6M
18 16607103_ed5
Page 19
337
336
334
335
335
334
333
301
332
339
339A
338
337
0.5-0.55 Nm
(2 Places)
0.5-0.55 Nm
QMM Switch Assembly Exploded Diagram
(Dwwg. 16601445)
QMM Switch Assembly Parts List
Table-9
Item Description Part Number
* Switch Assembly with Label --- --- QMMH-1-A74 QMMH-1-A75
301 Handle Label Kit --- --- QMMH-301 QMMH-301
* Switch Assembly QMMH-1-D74 QMMH-1-D75 QMMH-1-D74 QMMH-1-D75
332 Sleeve, Transparent QMMH-600 QMMH-600 --- ---
333 Switch Housing QMMH-80 QMMH-80 --- ---
334 Spring QMMH-250 QMMH-250 --- ---
335 Slide Switch Ball QMMH-696 QMMH-696 --- ---
336 Switch Housing Cover QMMH-144 QMMH-144 --- ---
337 Cap Head Screw (M2 x 0.4 x 8) QMMH-PCB-638 QMMH-PCB-638 --- ---
338 Handle Small PCB Assembly QMMH-A499-1 QMMH-A499-1 --- ---
339 Detent Slide Switch, Assembly --- QMMH-A75 --- ---
339A Momentary Slide Switch, Assembly QMMH-A74 --- --- ---
16607103_ed5 19
Page 20
QMM Control Panel Assembly Exploded Diagram
362
357
353
358
365
361
360
357
359
356
355
354
350
352
351
363
363A
364
364A
1.0-1.4 Nm
(4 Places)
1.5-2.1 Nm
(4 Places)
(Dwg. 16603037)
QMM Control Panel Parts List
Table-10.1
Item Description Part Number
350 Control Panel Assembly Kit QMML-A424-KIT
351 Control Panel Whip Cable (1 Meter) QMMC-A240-1
352 Cable Gland QMML-46
353 Emergency Switch, Bezel QMMC-78E-Y
354 Metal Frame Assembly QMML-D28
355 Thread Forming Screw (M2.5 x 1.06 x 10) QMML-PCB-638
356 Control Panel PCB Assembly QMML-A499
357 Control Panel Label Kit QMML-301
358 Emergency Switch QMMC-78E
359 Control Panel Basic Assembly (Includes 360, 361 and 362) QMML-A424R
360 Light Pipe-8 mm QMML-7-8
361 Light Pipe-10 mm QMML-7-10
362 Low Cap Head Screw (M3 x 0.5 x 20) QMML-638
363 Control Panel Power Head Cable (2 Meter) QMMC-A240-2
363A Control Panel Power Head Cable (12 Meter) QMMC-A240-12
364 Cable Extension Assembly (20 meter) QMMC-A240-20
364A Cable Extension Assembly (10 meter) QMMC-A240-10
Accessories (Control Switch)
Table-10.2
Item* Description
365 3 Position Selector Switch QMMC-75-1 QMMC-75-2
365 2 Position Selector Switch QMMC-76-1 QMMC-76-2
365 Push Button QMMC-77-1 QMMC-77-2
365 Buzzer QMMC-78-1 ---
365 Pilot Light, Red QMMC-79-1 QMMC-79-2
365 Pilot Light, Green QMMC-80-1 QMMC-80-2
365 3 Position Selector Switch, Key Lock QMMC-81-1 QMMC-81-2
* Options for Control Switch
20 16607103_ed5
Idec Make Telemecanique Make
Part Number
Page 21
QMM Pneumatic Handle with Flange Exploded Diagram
381
382
383
16-20 Nm
(3 Places)
314
4
317
384
4
315
116
30-35 Nm
12-16 Nm
(4 Places)
12-16 Nm
(4 Places)
(Dwg. 16608911)
□ Apply Serviceable Thread Locker
QMM Pneumatic Handle with Flange Parts List
Table-11
Item Description Part Number
* Pneumatic Handle Assembly QMMH-A35 QMMH-A36
4 Cap Head Screw (M6 x 1 x 16) QMM-F1-638 QMM-F1-638
116 Cap Head Screw (M8 x 1.25 x 25) QMM-T6-638 ---
314 Bracket QMMH-900-D ---
315 End Ball QMMH-629 ---
317 Handle Flat Mount Flange --- QMMH-35
381 Pendant Handle 80148539 80148539
382 Pneumatic Handle Bracket QMMH-35A QMMH-35A
383 Cap Head Screw (1/4-20 x 5/8) QMMH-35-638 QMMH-35-638
384 Male Stud Elbow, 1/4-18 NPT QMMH-188 QMMH-188
16607103_ed5 21
Page 22
Parts and Maintenance
When the life of the product has expired, it is recommended that the product be disassembled, degreased and parts be separated by material
so that they can be recycled.
Product repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Oce or Distributor.
Related Documentation
For additional information refer to:
Multiple Spindle Fixture Product Safety Information Manual 16607095.
Multiple Spindle Fixture Product Information Manual 16607228.
Manuals can be downloaded from www.irtools.com.
22 16607103_ed5
Page 23
Notes:
Page 24
www.irtools.com
© 2008 Ingersoll Rand Company
Loading...