Ingersoll-Rand 16574311 User Manual

16574311

Edition 1

November 2006

“D” Series and MDT3-EU Air Percussive Chipping Hammer Exploded Diagram

24A

22A

(Dwg. TPC655-2 )

“D” Series and MDT3-EU Air Percussive Chipping Hammer Parts List

Item Part Description Part Number Item Part Description Part Number

1 Grip Handle Assembly 17 Barrel

for 2DA, 3DA, 4DA 3DA-A1 for 2DA 2DA-6

for MDT3-EU 3DA-A1-EU for 3DA 3DA-6

2 Throttle Lever 3DA-134 for 4DA 4DA-6

3 Roll Pin C-15 for MDT3-EU (threaded) 3DW-EU-6

4 Throttle Valve Plunger 3DA-604 19 Collar 3DA-A43

5 Throttle Valve Ball HH-602A 20 Nyloc Nut (4) 3DA-305

6 Throttle Valve Spring 3DA-51 21 Nozzle

7 Air Strainer 834-61 .680” round B01-19B

9 Inlet Bushing .580” hex B01-7B

7/8”-24 (for 2DA, 3DA, 4DA) 3DA-382 .780” hex (MDT3-EU only) 3DA-330

3/8” for MDT3-EU “ 3DA-282 22 Exhaust Deector 3DA-85

10 O-Ring 3DA-121 22A Noise Label (-EU models only) 92679646

11 Valve Cap HH-4 23 Bolt (4) 3DA-549

12 Valve Spacer HH-8A 24 Arrow Retainer (Plain Type) HH1-1190

13 Valve HH-2A 24A Lock Spring HH1-1194

14 Valve Seat HH-3 25 Warning Label

15 Dowel Pin (2) HH-32 for 2DA, 3DA and 4DA WARNING-2-99

16 Piston for MDT3-EU EU-99

for 2DA HH1-5 26 Buer Screw Retainer (for -EU models only) 3DW-50

for 3DA, 4DA and MDT3-EU HH4-5 27 Retainer Lock Spring (for -EU models only) 24SR-207

28 Retainer (for -EU models only; threaded barrel) HHW1-300

Parts and Maintenance

When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and parts be separated by material so that they can be recycled.

Tool repair and maintenance should only be carried out by an authorized Service Center.

Refer all communications to the nearest Ingersoll Rand Oce or Distributor.