Ingersoll-Rand 16574303 User Manual

K2 Series Air Percussive Scaler Exploded Diagram

33A

12A

(Dwg. TPC2-2)

K2 Series Air Percussive Scaler Parts List

Item Part Description Part Number Item Part Description Part Number

1 Handle Assembly K-1B • 14 Nozzle

• 2 Throttle Lever N00-78 Hexagon (standard size) B01-7B

• 3 Throttle Lever Pin N00-15 Round (standard size) B01-19B

+ 4 Throttle Valve AVC11-402 * Warning Label

• 5 Throttle Valve Face AVC11-259 (for models ending in 1SA, 2

6 Strainer Body R0B1J61-565 or 2SA only) WARNING-6-99

6A Air Strainer AF120-61 Oversize Hexagon Nozzle

7 Throttle Valve Cap AV1-109 .0005” oversize B01-7B-5

• 8 Throttle Valve Spring H02-51 • 15 Piston

9 Throttle Valve Plunger AV1-64 Standard Size K2-5

10 Valve Box K-4 .004” oversize K2-5-4

11 Valve K1-2 .008” oversize K2-5-8

12 Valve Seat K-3 16 Locking Ring K-196A

12A Valve Box Dowel Pin (2) K-32 17 Exhaust Deector K-85A

13 Barrel Assembly # 18 Chisel ---

with Hexagon Nozzle

for models ending in 1 or 1SA K2L-AH6A

for models ending in 1-EU

or 1SA-EU K2L-AE-EU-6A

with Round Nozzle

for models ending in 2 or 2SA K2L-AR6A

for models ending in 2-EU or 2SA-EU K2L-AR-EU-6A

* Not Illustrated + The listed Throttle Valve with rubber Throttle Valve Face can be used as a replacement for the all-steel Throttle Valve previously used. The all-steel Throttle Valve is no longer available.

• To keep downtime to a minimum, it is desirable to have on hand certain repair parts. We recommend that you stock one (pair or set) of each part indicated by a bullet (•) for every four tools in service. # Inquire at nearest Ingersoll Rand Distributor for types and prices.

16574303

Edition 1

February 2007

Arrow Quick Change Retainer Exploded Diagram

33A

33B

33C

33D

(Dwg. TPD416)

Arrow Quick Change Retainer Parts List

Item Part Description Part Number

33 Arrow Retainer

Plain Type (illustrated on Tool) K2L-1190

Quick-Change Type (See Figure 1) K2L-1191

33A Lock Spring (for No. K2L-1190 or No. K2L-1191 Retainer) HH1-1194

33B Flat Spring and Pin (for No. K2L-1191 Retainer) HH1-1191-2A

33C Rotating Insert (for No. K2L-1191 Retainer) HH1-1191-3

33D Insert Spring (for No. K2L-1191 Retainer) HH1-1191-4

Maintenance Tools

Tool Number for Ordering Tool Name for Ordering Operation

34SR-54 Exhaust Deector Pliers Removing and installing Exhaust Deector (17).

K2L-119 Nozzle Ejection Arbor Remove Nozzle (14) from Barrel (13).

Parts and Maintenance

When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and parts be separated by material so that they can be recycled.

Tool repair and maintenance should only be carried out by an authorized Service Center.

Refer all communications to the nearest Ingersoll Rand Oce or Distributor.