infinity Aura Quick Start Guide
Auto ProgramsIn-Use Screen
After a Massage program is
selected, In-use screen displays all
settings to that program.
1
2
3
4
5
Quick - Rapid demonstration of all massage
techniques and chair motions.
Energy - Comprehensive massage session
using deep tissue kneading, and tapping
combines with air cell compression.
Relief - Massage session focused on back and
leg/foot region muscle recovery.
Stretch - Performs a series of grab, hold, and
stretch sequences while the back and legrest
6
7
8
move up and down. This is combined with
traditional massage techniques.
Renew - Massage session built for winding
down with slower paced massage techniques.
All Air - This massage uses only airbags for a
full-body compression massage, alternating
between the feet, calves, seat, arms, hands,
and shoulders.
Quick Start
Guide
1
Program
2
Indicators
3
Time remaining
4
Active airbags
5
Airbag intensity
6
Massage techniques
Back-roller position & direction
7
Massage speed
8
Share a photo and tag us:
@Infinitymassagechairs
@infinity_chairs
@Infinitymassagechairs
Don’t forget to use #lovemyinfinitychair
72 Stard Road, Seabrook, NH 03874
603-910-5000
www.infinitymassagechairs.com
Version 1.0
Aura
Massage Chair
Power – Powers up the remote or
returns the chair to the exit position
and powers down remote.
LCD Screen
Displays the current massage program
and settings.
Timer – Press to adjust your massage
time in 5-minute increments, with a
max massage time of 30 minutes.
Zero Gravity – Press to turn on Zero
Gravity. Press button again to turn off.
Pause – Press to force stop the chair
during a program and stop all
functions. Press again to resume.
Auto Programs – Press any of the
highlighted auto program buttons to
jump to the corresponding program.
Airbag Intensity – Press to toggle the
intensity of the airbag massage: Soft,
Medium, or Strong.
Air Zone – Press once for foot air
massage; twice for leg air massage;
three times for leg and foot air
massage; four times for arm air
massage; five times for shoulder air
massage. Press six times to turn off.
Z G
Air Zone
Quick
Timer
Z G
Pause
I-Energy
All air
III-Stretch IV-Renew
Air Zone
Manual
Width
Heat
Foot
II-Relief
Back Zone
Quick
Manual
Back Zone
Quick Auto Program – Press for a
6-minute demonstration of all available
massage techniques.
Footrest Adjustment – Press and hold
up arrow to raise the footrest, press
and hold down arrow to lower footrest.
Heat – Press to turn on lumbar heat.
Press button again to turn off lumbar
heat.
Backrest Adjust – Press and hold down
arrow to recline seat back, press and
hold up arrow to upright the seat back.
Foot Rollers – Press to turn on foot
roller massage. Press button again
to turn off foot roller massage.
Massage Speed – Press to select
your desired massage speed: Slow,
Medium, or Fast.
Manual – Press to toggle between
massage techniques: Kneading,
Knocking, Kneading & Knocking,
Tapping, or Shiatsu.
Back Zone – Press to select your
desired back massage region: Point,
Partial, or Whole massage.
Back Roller Adjust – Press to set your
shoulder height during body scanning.
Width
Width – Press to select your desired
back mechanism width when using
Knocking, Tapping, or Shiatsu
techniques: Narrow, Medium, or Wide.
Loading...