Image IMBE53900 User Manual

QUESTIONS?

As a manufacturer, we are committed to providing complete customer satisfaction. If you have questions, or if there are missing parts, we will guarantee you complete satisfaction through direct assistance from our factory.

TO AVOID UNNECESSARY DELAYS, PLEASE CALL DIRECT TO OUR TOLL-FREE CUSTOMER HOT LINE. The trained technicians on our customer hot line will provide immediate assistance, free of charge to you.

CUSTOMER HOT LINE:

1-800-999-3756

Mon.ÐFri., 6 a.m.Ð6 p.m. MST

Model No. IMBE53900 Serial No.

Write the serial number in the space above for reference.

CAUTION

Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference.

Serial Number Decal (under seat)

USERÕS MANUAL

Visit our website at

www.imagefitness.com

new products, prizes,

fitness tips, and much more!

IMAGE is a registered trademark of ICON Health & Fitness, Inc.

Important Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Part Identification Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Adjusting the Weight Bench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Ordering Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

Note: A Part List/Exploded Drawing is attached in the center of this manual. Remove the Part List/Exploded Drawing before beginning assembly.

Table of Contents

1. Read all instructions in this manual before using the weight bench. Use the weight bench only as described in this manual.

2. It is the responsibility of the owner to ensure that all users of the weight bench are adequately informed of all precautions.

3. The weight bench is intended for home use only. Do not use the weight bench in a commercial, rental, or institutional setting.

4. Use the weight bench only on a level surface. Cover the floor beneath the weight bench to protect the floor.

5. Inspect and tighten all parts each time you use the weight bench. Replace any worn parts immediately.

6. Keep children under 12 and pets away from the weight bench at all times.

7. Keep hands and feet away from moving parts.

8. Always secure your weights (not included) with weight clips when they are mounted on the barbell.

9. Always make sure that there is an equal amount of weight on each side of the barbell.

10. If you feel pain or dizziness at any time while

exercising, stop immediately and begin cooling down.

11. The weight bench is designed to support a maximum of 560 pounds, including the user, a barbell, and weights. Do not place more than 310 pounds, including the barbell, on the weight gliders and safety spotters.

12. Always set both safety spotters at the same height.

13. Always wear athletic shoes for foot protec-

tion while exercising.

14. Always move the bench out of the way when

performing an exercise that does not use the bench.

15. The decals shown below have been placed

on the weight bench. If a decal is missing or illegible, please call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time, to order a free replacement decal. Apply the decal in the location shown on page 4.

WARNING: Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

WARNING: To reduce the risk of serious injury, read the following important precau-

tions before using the weight bench.

Important Precautions

Keep hands and fingers clear of this area.

¥ Misuse of this product may result in serious injury.

WARNING

¥ Read userÕs manual and follow all warnings and operating instructions prior to use.

¥ Replace label if damaged, illegible, or removed.

¥ Do not allow children on or around machine.

Decal 2Decal 1

Weight

Storage

Tube

Dumbbell

Storage

Rack

Seat

Pull-up Bar

Upright

Weight Guide

Weight Glider

Barbell

Safety Spotter

Curl Pad

Warning Decal 1

Warning Decal 2

Leg Lever

Right Side

Left Side

Note: The terms Òright sideÓ and Òleft sideÓ are determined relative to a person sitting on the bench; they do not refer to right and left on the drawings in this manual.

Backrest

Adjustment

Bracket

Backrest

Thank you for selecting the versatile IMAGE¨4.5 weight bench. The IMAGE¨4.5 is designed to help you develop every major muscle group of the body. Whether your goal is a shapely figure, dramatic muscle size and strength, or a healthier cardiovascular system, the IMAGE¨4.5 will help you achieve the specific results you want.

For your benefit, read this manual carefully before using the IMAGE¨4.5. If you have additional ques-

tions, please call our Customer Service Department

toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please note the product model number and serial number before calling. The model number is IMBE53900. The serial number can be found on a decal attached to the weight bench (see the front cover of this manual).

Before reading further, please review the drawing below and familiarize yourself with the parts that are labeled.

Before You Begin

Warning Decal 1 has been placed in the indicated position, on both sides of the bench.

Part Identification ChartÑModel No. IMBE53900

R1100A

Large Washer (70)

M8 Washer (77)

M10 Washer (6)

M6 Washer (30)

M10 Nylon Locknut (11)

M8 Nylon Locknut (42)

M10 x 70mm Bolt (21)

M10 x 80mm Bolt (31)

M8 x 65mm Carriage Bolt (71)

M10 x 25mm Bolt (69)

M6 x 16mm Screw (3)

M8 x 16mm Bolt (75)

M8 x 25mm Bolt (76)

M8 x 30mm Bolt (64)

M6 x 35mm Bolt (34)

M8 x 60mm Bolt (65)

M10 x 65mm Carriage Bolt (66)

M8 x 70mm Bolt (41)

M10 x 65mm Bolt (68)

M10 x 60mm Button Head Bolt (12)

M6 x 55mm Screw (4)

M10 x 190mm Bolt (22)

1. Before beginning, make sure that you understand the information in the box above. Note: Some parts described in the assembly steps may be pre-assembled.

Press a 50mm Square Outer Cap (20) onto each end of a Base (46). Turn the Base so the large hole is in the position shown. Insert two M8 x 65mm Carriage Bolts (71) and two M10 x 65mm Carriage Bolts (66) up into the indicated holes in the Base. Place the Base flat on the floor.

Turn the Base Crossbar (54) so the warning decal is on top. Attach the Base (46) to the Base Crossbar with two M8 x 70mm Bolts (41), a Large Support Plate (50), and two M8 Nylon Locknuts (42). Do not

tighten the Nylon Locknuts yet.

2. Press a 50mm Square Outer Cap (20) onto each end of the other Base (46). Turn the Base so the large hole is in the position shown. Insert two M8 x 65mm Carriage Bolts (71) and two M10 x 65mm Carriage Bolts (66) up into the indicated holes in the Base. Place the Base flat on the floor.

Attach the Base (46) to the Base Crossbar (54) with two M8 x 70mm Bolts (41), a Large Support Plate (50), and two M8 Nylon Locknuts (42). Do not tighten

the Nylon Locknuts yet.

Before beginning assembly, carefully read the following information and instructions:

¥ Assembly requires two people.

¥ Place all parts in a cleared area and remove the

packing materials. Do not dispose of the packing materials until assembly is completed.

¥ Tighten all parts as you assemble them, unless

instructed to do otherwise.

¥ For help identifying small parts, use the PART

IDENTIFICATION CHART on page 5. Note:

Some small parts may be pre-assembled.

¥ As you assemble the weight bench, make sure all

parts are oriented as shown in the drawings.

In addition to the included allen wrench , assembly requires the following tools (not included):

¥ Two (2) adjustable wrenches

¥ One (1) rubber mallet

¥ One (1) standard screwdriver

¥ One (1) phillips screwdriver

¥ Lubricant, such as grease or petroleum jelly,

and soapy water.

Assembly will be more convenient if you have the following tools: A socket set, a set of open-end or closed-end wrenches or a set of ratchet wrenches.

Assembly

Make Things Easier for Yourself!

This manual is designed to ensure that the weight bench can be assembled successfully by anyone. By setting aside plenty of time, and by deciding to make the task enjoyable, assembly will go smoothly.

Decal

Large Hole

+ 13 hidden pages