illy X7 Metodo Iperespresso Instruction Manual

INSTRUCTION MANUAL

EN

GENERAL OPERATING
RULES

Carefully read the instruction manual
and warranty limitations

The machine must be connected
to a grounded power outlet. The machine
must be kept clean by frequently washing
the grid, the driptray, the capsule holder,
the tank, the steam knob

EXTREMELY IMPORTANT: never immerse the
machine in water or put it in the dishwasher.
The water contained in the tank must be
replaced regularly. Do not use the machine if
the tank is empty

After changing the water, insert the water
tank into the machine, making sure that it is
completely inserted
It is recommended to remove calcium
deposits at least every two months using
a decalcification agent made especially for
espresso machines according to instructions
in the chapter

The boiler is fitted with a valve that maintains
constant pressure, for this reason some water
may drip from the capsule holder

DECALCIFICATION

MACHINE PARTS ...............................................................................30

32
32
33
33
33

INSTALLATION AND START-UP OF ESPRESSO MACHINE ........................................34

TURNING ON/OFF .............................................................................35

MAKING COFFEE ...............................................................................36

MAKING CAPPUCCINO.........................................................................38

MAKING HOT WATER...........................................................................40

PREPARING COFFEE AFTER GENERATING STEAM...............................................41

DECALCIFICATION..............................................................................42

CLEANING AND MAINTENANCE................................................................44

TECHNICALDATA...............................................................................45

RECOMMENDATIONS ..........................................................................45

TROUBLESHOOTING ...........................................................................46

WARRANTY LIMITATIONS ......................................................................48

IMPORTANTSAFEGUARDS .....................................................................32

USING THE ESPRESSO MACHINE ..........................................................................

...............................................................

CLEANING THE ESPRESSO MACHINE ......................................................................

IN CASE OF MALFUNCTIONING ............................................................................

IMPROPER USE OF THE ESPRESSO MACHINE..............................................................

INSTALLATION OF THE ESPRESSO MACHINE

table of contents

EN

machine parts

A

B

C
D

E"

F
G
H
I
L
M

ON/OFF SWITCH
(lights up when the machine is on)

BREWING UNIT

STEAM ARM

STEAM TIP

DRIPTRAY FULL INDICATOR

STEAM KNOB

COFFEE SWITCH ON/OFF
(lights up when temperature is ok)

STEAM SWITCH (lights up if activated)

TEMPERATURE DISPLAY coffee ok ­steam ok - water tank empty

METODO IPERESPRESSO"

CAPSULE HOLDER

DRIP TRAY

30

80

60

40

20

C

L

G

H

M

A

B

D

E

I

F

N
O
P
Q
R

CUP HOLDER

WATER TANK

POWER CORD

DATA PLATE (below)

ALARM if active
indicates machine
is on or there is an
irregular functioning

31

EN

O

P

Q

N

R

O

P

N

R

Q

IMPORTANT SAFEGUARDS

USING THE ESPRESSO MACHINE

- This appliance is intended for household use only. Any other use
is to be considered improper and
therefore dangerous

- Unplug the appliance from the
power socket when the
appliance is not in use

- Do not touch hot surfaces. Use
handles and switches

- This machine is manufactured
to "make espresso coffee" and
to "warm up beverages": use
care to prevent scalding due to
water jets or any improper use of the machine

- The appliance must not be used by children

- The appliance must be used solely by adults in no altered
psycho-physical conditions

- Use the appliance indoors only and away from atmospheric agents

- To protect against fire, electric shock or personal injury do not
immerse the cord, the plug or the body of the machine in water or
any other liquid

- Do not use the appliance for purposes other than its intended use

- Do not place the appliance on electrical or gas burners nor
inside a hot oven

- The appliance must be turned on only when the machine is
used. It must then be turned off by pressing the ON/OFF switch

and the plug must be disconnected from the power socket

- Using attachments not recommended by the manufacturer may
result in fire, electric shock, or personal injury

- Do not let the cord hang over tables or countertops

- Before unplugging the appliance make sure that the ON/OFF
switch is off and not lit up 1

32

When using your coffee maker, basic safety precautions should al­ways be followed, including the followed to reduce the risk of fire,
electric shock, and/or injury to persons including the following:
1 Read all instructions

2. Do not touch hot surfaces. Use handles or knobs

3. To protect against electric shock, do not place cord, plug, or ap­pliance in water or other liquid

4. Close supervision is necessary when any appliance is used by
or near children

5. Unplug from the outlet when not in use and before cleaning.
Allow to cool before putting on or taking off parts, and before clea­ning the appliance

6. Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or has been damaged in any
manner. Return appliance to an authorised service facility for exa­mination, repair or adjustment

7. The use of accessory attachments not recommended by the
appliance manufacturer may result in fire, electric shock or injury to
persons

8. Do not use outdoors

9. Do not let cord hang over edge or table or counter, or touch
hot surfaces

10. Do not place on or near a hot gas or electric burner, or in a he­ated oven

11. Always attach plug to appliance first, then plug cord into the
wall outlet. To disconnect, turn any control to the off position, then
remove plug from wall outlet

12. Do not use appliance for other than intended use

13. Save these Instructions

1

CLEANING THE ESPRESSO MACHINE

- Unplug the machine from the power supply before cleaning the
appliance

- Wait for the appliance to be cold before cleaning

- Do not expose the machine to extended water jets or partial or
full immersion in water

- Before unplugging the machine check that the ON/OFF switch
is off and not lit up

- Clean the body and attachments with a wet cloth and then wipe

with a dry cloth. Do not use detergents

1

IN CASE OF MALFUNCTIONING

- Do not use the appliance if the cord or plug are damaged or if
the appliance shows signs of malfunctioning or if it has been
damaged in any way. Return the appliance to the nearest
authorized dealer for checks or repairs

If the power cord is damaged, it must be replaced by the manu­facturer or a certified assistance center

- In case of faults or malfunctioning, turn off the appliance and do
not tamper with it. For repairs contact a Technical Assistance
Center authorised by the manufacturer and request the use of
original spare parts only. Failure to comply with these instructions
may compromise safe operation of the machine and will not be
covered by warranty

IMPROPER USE OF THE ESPRESSO MACHINE

- This appliance is intended for household use only. Any other use
is to be regarded as improper

- The manufacturer is not liable for accidents caused by lack of or
non conformity to existing legislation on grounding requirements

- The manufacturer is not liable for possible damage caused by im­proper, incorrect or unreasonable use

WARNING: SAVE THESE INSTRUCTIONS

33

EN

INSTALLATION OF THE ESPRESSO MACHINE

- Read the instructions carefully

- Check that electric voltage corresponds to the requirements indi-

cated in the data plate on the machine. Connect the machine only
to a grounded power socket with minimum voltage of if
power required is and if power required is

- If the plug and the socket are not compatible, have the plug re-

placed by qualified personnel

- Place the appliance on a countertop away from water taps and

sinks

- After removing the packaging, check that the appliance is intact

before installation

- Do not install the machine in an area where the temperature

may reach or be lower than (if water freezes, the appli­ance may be damaged) and higher than

0°C/30°F

40°C/140°F

6A

230 Vac 12 A 120

Vac

WARNING:
When the machine is in use, contact with the brewing unit , the steam arm and ,
and the metal part of the capsule holder may cause scalding

ABC

D

installation and start-up of espresso machine

Before connecting the appliance to a power supply, carefully read the safeguards listed in the previous chapter

Connect the machine to a power socket

If necessary the boiler filling system activates automatically

Check that the steam knob is closed and the machine is disconnected from the power supply

Twist the capsule holder firmly in place

Remove the tank, wash it, fill it with cold water and put it back in place making sure it positioned correctly

To turn on the machine press switch until it lights up

1

2

3

4

It is recommended to keep the original packaging (at least for the duration of the warranty period)
in case the machine needs to be shipped to an Assistance Center for repairs

3

2

4

A

C

D

B

1

Adjust the water level in tank by adding cold water

To turn on the machine press switch until it lights up

The icons in the top display light up to indicate the increase of
the temperature in the boiler

After a few minutes the machine signals that operating temperatu­re has been reached by lighting up the coffee switch and emit­ting a short beep

If the triangular icon lights up and the beep is intermittent, re­fer to the section

NOTE: Before using the machine for the first time or after a long
period of inactivity, it is suggested to flush it out a few times with­out the capsule

If necessary the boiler filling system activates automati­cally

TROUBLESHOOTING

To turn off the machine, press switch until the front display
turns off. It is recommended not to unplug the machine when
the machine is on

1

2

3

4

5

6

turning on/off

35

EN

2

1

4

3

6

5

making coffee

The X7 machine is designed to function exclusively with “Metodo Iperespresso” capsules

Dosing is performed automatically by the machine

To change the quantity of coffee in the cup and set a new value, press the coffee switch until you have obtained the desired quantity,
then release the switch

It is possible to eliminate the automatic dosage function, following the instructions above, keeping the delivery button pressed until the
machine itself blocks the delivery, then release the button

To set the automatic dosage again, follow the instructions at the beginning

The automatic dosage can be avoided by pressing the delivery button 5 for longer than 3 seconds; to stop delivery press button 5 again

Check that the coffee switch is lit up

Twist the capsule holder, insert a capsule , re-position the capsule holder in the brewing unit and twist it to the right until it is locked in
place

1

5

2

3

4

36

21

4

3

37

EN

Press the coffee switch to start making coffee

Coffee dispensing will stop automatically once the set quantity is obtained, to stop dispensing before the set quantity is obtained press
the coffee switch again

Remove the capsule from the capsule holder and repeat the steps above for each cup

The brewing cycle consists of a first phase called "pre-infusion" (short injection of water in the capsule followed by a pause) lasting
about 3 seconds and a second phase for brewing

5

6

WARNING:

- For safety reasons, brewing stops automatically after approx. 1 minute

- Do not use distilled or demineralised water to make coffee. It may compromise the proper functioning of the machine

- Remember to empty and clean the drip tray regularly

- Remember to replace the water in the tank frequently

65

making cappuccino

The machine is fitted with a steam arm to froth milk and prepare one or more cappuccinos

Prepare one or more coffees following the steps outlined below

Froth the milk as follows:

Take fresh milk from the refrigerator and pour it in a pitcher (preferably metal)

Remove the capsule from the unit

Press the steam switch ; the steam icon located on the central display lights up to indicate the machine is warming up

Wait for the steam switch to light up (machine ready) followed by a short beep

Turn the steam knob counterclockwise, allow any residual water to exit the nozzle until steam is produced and close the steam knob
by turning it clockwise

1

2

3

4

38

1

2

3

4

WARNING:

- Contact with steam and the steam arm A may cause serious scalding

- Do not turn on the steam knob when the machine is cold and the nozzle is immersed in water

- When generating steam for extended periods of time the automatic boiler filling system repeatedly activates the pump for brief intervals

- If the steam is not used for a few minutes, the machine automatically returns to the coffee position

- After a prolonged delivery of steam, which in the 120 V version can last up to 8 minutes at most, in order to prevent overheating,

only the coffee preparation could remain operative. This happens if, when the steam button is pressed, the machine does not light up
the steam icon situated on the circular crown, but makes the coffee icon flash

- When heating and functioning in steam mode, the boiler in the machine heats up and may generate slight releases of steam from the

bottom capsule holder: therefore avoid keeping extremities or other body parts near the coffee dispensing area to prevent scalding

Immerse the steam arm in the milk , turn the steam knob counterclockwise and wait for the milk to froth

Close the steam knob by turning it clockwise

Pour the froth and the milk in the cups containing coffee

Clean the steam arm with care to remove milk residue with a cloth and turn knob to open, releasing some steam to remove milk
residue from the inside of the steam arm56

39

EN

A

5

6

making hot water

The steam arm fitted to the machine can also heat up water

Fill a metal pitcher with the desired quantity of water to be heated

Remove the capsule from the unit and any milk residue from the steam arm

Press the steam switch ; the steam icon on the front display lights up to indicate that the machine
is heating up

Wait for the steam switch to light up (machine ready) followed by a short beep

Immerse the steam arm in the water and open the steam knob by turning it counterclockwise ;
close the steam knob by turning it clockwise after reaching the desired temperature

12

3

4

5

6

40

WARNING:
When heating and functioning in steam mode, the boiler in the machine heats up and may generate

slight releases of steam from the bottom capsule holder: therefore avoid keeping extremities or other
body parts near the coffee dispensing area to prevent scalding

21

4

6

3

6

5

tues), the cup icon on the temperature display lights up

To resume coffee making in a shorter period of time (approx. 1 minute) follow these instructions:

Press the coffee switch

Place a pitcher under the steam arm; turn on the steam knob counterclockwise to generate steam until
the machine emits a short beep and the coffee switch lights up

Close the steam knob by turning it clockwise ; the machine is ready to make an espresso

3

4

56

It is very important to avoid preparing an espresso immediately after
generating steam because the water heated by the boiler is too hot
and may compromise the taste of coffee

For this reason the coffee switch is inactive when the temperature
inside the boiler is too high (coffee switch off)

To return to coffee making, press the coffee switch and wait for
the switch to light up ; during the cooling phase (approx. 10 min-

1

2

preparing coffee after generating steam

41

EN

A

5 6

3

4

21

Starting the procedure:

Fill the tank with 1 liter of water (up to the MAX level) ; pour in the decalcifying product supplied with the machine; wait for it to dissolve

Remove the capsule and the holder, place an empty container with a capacity of at least 1 lt under the delivery unit

Press the coffee switch and the steam switch simultaneously for at least 5 seconds ; the coffee switch and the triangular icon

start flashing

1

2

3

4

The machine keeps track of its overall use and based on the
quantity of coffee or steam delivered may require a decalcifying
cycle, signaled by the flashing of the triangular icon (1 flash
every 2 seconds)

The machine is equipped with an automatic program for optimum
cleaning and removal of calcium residue from the inside of the machine

To perform the cleaning program it is advisable to use the
decalcifying agent supplied with the machineAB

decalcification

42

1

max

1litro
1litre

3

4

2

A

B

WARNING:

- Should a power outage occur while performing the decalcification procedure, it will be necessary to

repeat the procedure from the start

- If the declacification procedures are not performed, calcium may cause malfunctioning not covered by the warranty

- It is advisable to use our decalcification agent

- Do not use vinegar, lye, salt, formic acid because they may damage the machine

B

Press the coffee switch to start the decalcification cycle the coffee switch turns off

At the end of the automatic decalcification cycle, lasting approx. a half hour, the machine emits an beep
and the coffee switch starts flashing again

Remove and empty the tank; wash it and fill it with 1 lt of fresh water (up to the MAX level) ; empty
the container and place it under the delivery unit

Press the coffee switch to start the rinsing cycle; the coffee switch turns off

The machine starts delivering water at set intervals lasting a few minutes

At the end of the rinsing cycle the triangular icon stops flashing and the machine emits beep

The machine automatically starts performing washing cycles at set intervals

Empty the container

The machine is ready to be used

5

6

7

8

9

10

43

EN

1litro
1litre

9

10

max

7

6

5

1litro
1litre

8

cleaning and maintenance

To ensure correct functioning and a high quality standard, it is
advisable to clean the machine regularly and with care

Operations to be performed when the machine is cold and dis­connected from the power supply:

cleaning the water tank

cleaning the steam arm and removing milk residue from
the arm

cleaning the capsule holder

cleaning the grid

cleaning the driptray

O

M
S

G

E

44

WARNING:

- Do not clean the machine with aggressive detergents (methanol, methyl chloride, acetone, aromatic hydrocarbons) that may damage

the surfaces

- Before performing clearing and maintenance procedures, unplug the machine from the power socket

80

60

40

20

G

O

E

M
S

technical data

Casing: polycarbonate

Internal boiler: brass

Tank: 1.2 liters

Pump: 15 bar

Solenoid valve

Electronic card with the following functions:

- automatic dosage of coffee delivery

- high precision temperature control (coffee and steam)

- boiler water level control and refill

- decalcification indicator

- boiler temperature indicator

- acoustic alarm

- automatic decalcification program

Steam arm

Top cup warmer

Weight without packaging: 6 Kg

Voltage: 230 V, 50 Hz (EU); 120 V, 60 Hz (USA)

Power: 1050 W (EU); 1100 W (USA)

The manufacturer reserves the right to make changes or
improvements without notice

To enjoy a high quality espresso, remember to:

- Change the water in the tank and empty the driptray at
least once a week

- Use water with low calcium content to reduce deposits
inside the machine

- Use the cup warmer

recommendations

45

EN

The machine is on but switch

does not light up A

No coffee comes out

I turn the knob but the
machine does not generate

Steam is generated but
milk does not froth

Water leaks from the unit
when making coffee

Rapid beeping and
triangular icon is flashing

Triangular icon is flashing slowly

Water leaks from inside
the machine

Perform the following operations:

- Turn off the machine

- Fill the water tank

- Place a pitcher under the steam nozzle and open the steam knob

- Turn on the machine wait approx. 10 seconds

- Close the steam knob wait for the coffee switch to light up

- Perform decalcification cycle

- Turn off the machine; disconnect the appliance from the power supply

- Check that the machine is connected to a power supply; check the safety switches of
your home power supply system

- Fill the tank, make sure it is securely inserted

- Make sure the steam knob is completely closed

- Remove the capsule holder from the unit

- Wait until coffee switch is lit (machine is ready to make coffee)

- Put a cup under the brewing unit and press coffee switch

- Let water run for a few seconds

- Press coffee switch again to stop flow

- Put in a new capsule in the capsule holder and turn capsule holder firmly into place
(turn handle to the Stop position) and then try to make coffee againEB

Case a) If the temperature display steam icon is on, wait for the steam icon
to light up

DC

Case b)

Case c)

If the temperature display steam icon is off, press the steam switch and wait for

the steam switch to light up (heating)

The steam nozzle could be obstructed: turn off the machine; wait for the machine

to cool (at least one hour); remove any obstruction from the holes of the steam nozzleDG

- Check that the capsules are for household use (the top of the capsule is the same
colour as the bottom) and not for professional use (the top of the capsule is transparent)

- Insert a new capsule in the capsule holder twist the holder in position until locked in
place and make coffeeEB

PROBLEM

SOLUTION

IF PROBLEM
PERSISTS

Contact
Assistance

46

PROBLEM

SOLUTION

IF PROBLEM
PERSISTS

Contact
Assistance

47

EN

The water tank leaks after
it has been filled

- Empty the water tank, press the transparent rubber washer
of the connection valve inside the tank firmly into place

After having pressed the steam button,
the machine does not light up the
steam icon situated on the circular
crown which shows the preparation
phase, but the coffee icon flashes

- The machine needs to cool down after a prolonged delivery of steam;
wait a few minutes and the machine will begin working again

Coffee drips from capsule before
extraction starts

- Some dripping during the first few seconds of extraction is normal

80

60

40

20

E

CG

A

B

D

warranty limitations

The warranty does not cover damage caused by:

- Damage caused by calcium or by a lack of periodical
decalcification

- Damage caused by operation with a voltage that differs from the
one indicated on the plate

- Damage caused by improper use or use that is not compliant
with the instructions

- Damage caused by internal modifications

Furthermore the warranty does not cover repair costs on ma­chines previously handled by non authorised assistance centers,
which will be entirely charged to the client

Lastly:

- Do not place the driptray in the dishwasher

- Keep the internal bottom of the tank holding column always dry

Failure to observe these instructions may cause problems to the
body of the machine not covered by the warranty

WARNING:
It is advisable to keep the original packaging (at least for the duration of the warranty period) to ship the machine

to the assistance centers for repair
Any damage caused by transport without adequate packaging will not be covered by the warranty

48

EN

The WEEE symbol used on this product means that it can not be disposed of with
other domestic waste and must be collected separately.
Consumers now have the opportunity to hand-in their used appliance free of
charge on a 1:1 basis when they purchase a new product. For further information
regarding the used appliance collection points, please contact the town of
residence, the local waste disposal service or nearest retailer. Consumers are
responsible for disposing of used appliances according to current laws and the
non-compliance thereof will attract fines and criminal sanctions. The correct
disposal of these products will contribute to protecting the environment and natural
resources as well as human health. Disposal of used electric and electronic
appliances for private individuals in the EU. The WEEE symbol used for this product
indicates that it is not to be disposed of with other household waste and should be
disposed of separately. Private consumers have the opportunity to hand in their
used appliance free of charge on a 1:1 basis when they purchase a new product.
For further information regarding the used appliance collection points, please
contact the local authority in your town of residence, the local waste disposal
service or the nearest retailer where the product was purchased. Consumers are
responsible for disposing of used appliances according to current laws and non­compliance thereof may be sanctioned. The correct disposal of this product will
contribute to protecting the environment, natural resources and human health.

79JA

C

US

LISTED

ESPRESSO MAKER

U

L

®