ikan RM7Xi User Manual

SPECIFICATIONS

Screen Size : Diagonal 7"
Resolution : 1024 x 600
LCD Brightness : 350 NIT
Contrast Ratio : 400:1
Viewing angles : 140(H) 110 (V)
Operating Volts : DC 12-20V
Power Consumption : 8 Watt
Dimension : 8.75"H x 19"W x 2.375"D
Rack Units : 4U
Weight : 8.4 lbs

SUPPORT RESOLUTION - HDMI, HD-SDI, Component, Composite

(Not all modes supported on all inputs)

480/59.94i
480/59.94p
576/50i
576/50p
720/23.98p
720/24p
720/25p
720/30p

720/50p
720/59.94p
720/60p
1080/23.98psf
1080/24psf
1080/23.98p
1080/24p
1080/25p

1080/29.97p
1080/30p
1080/50i
1080/50p
1080/59.94i
1080/59.94p
1080/60i
1080/60p

RM7X

Two VX7 Rack Mount Unit QUICKSTART GUIDE

CONDITIONS OF WARRANTY SERVICE

• Free service for one year from the day of purchase if the problem is caused by manufacturing errors.

• The components and maintenance service fee will be charged if the warranty period has expired.

Free Service will not be Provided in the Following Situations: (* Even if the product is still within the warranty period.)

• Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company.

• Damage caused by natural disaster, abnormal voltage, and environmental factors etc.

3903 Stoney Brook Dr. Houston TX 77063. 1-713-272-8822, [e-mail] © 2010 ikan Corporation. All right reserved. www.ikancorp.com

What’s included

� RM7X Rack Mount Unit
� AC Power Adapter

Checked by

www.ikancorp.com 713-272-8822

RM7X

Two VX7 Rack Mount Unit QUICKSTART GUIDE

RM7X

VX7

VX7

HDMI

+

HDMI

+

VIDEO

F1

YPbPr

ASPECT/

Power Switch

1

SDI

HDMI

1

2 3 4 5 6 7

MENU

BRIGHT/

EXIT

F2

R

Power ON / OFF

Power Indicator Light

2

When the power is ON, the LED green lights up.

SDI Selection Switch

3

Serial digital interface input (HD/SD compatible)

4

VIDEO Selection Switch

Video input

5

HDMI Selection Switch

High-Definition Multimedia Interface input

YPbPr Selection Switch

6

Analog component or RGB input

7

ASPECT/EXIT Selection Button

Aspect: 16:9, 4:3, Full
In MENU, it is to exit the menu.

CONTRAST/

DC 12V - 20V

DC 12V

+

PIN1-M1Grn
PIN2- M1Red
PIN3-M1Yel
PIN4-Gnd
PIN5-Gnd
PIN6­PIN7­PIN8-

+

DC 12V - 20V

DC 12V

TALLY

MONITOR 1

MONITOR 2

PIN9­PIN10­PIN11-M2Grn
PIN12-M2Red
PIN13-M2Yel
PIN14-Gnd
PIN15-Gnd

6

7

VIDEO

Y

Pb

Pr

SDI

IN

OUT

5 4 3 2 1

10 9 8 7 6

15 1413 1211

DC 12V-20V power terminal

Coax DC Connection

Vesa 100mm Mount Holes

Threaded for

M4x.07 screws. Use to attach pro battery

plate adapter or for mounting third party vesa mounts.

DIP Switch

8

Enable special 720p modes. For the monitor to correctly display
certain 720p signals, it is necessary to configure the DIP switches.

**NOTE: The user must turn the monitor off before making changes to
the DIP switches. Failure to do so may damage the monitor or make
the monitor unusable.

9

USB terminal

For firmware update used only

On

Switch

50p

VIDEO

Y

Pb

Pr

VIDEO

F1

YPbPr

ASPECT/

CHROMA/

TINT/

SHARPNESS

B

G

SDI

HDMI

F1 and F2 Buttons

8

Function key actions are selected in the menu.

MENU Knob

9

It is to display menu, select settings, and adjustments.

(Push the knob to select, turn the knob to adjust settings.)

BRIGHT/R Knob

10

1: Adjust brightness 0 - 60 (30)
2: Adjust red channel

11

CONTRAST/G Knob

1: Adjust contrast 0 - 60 (30)
2: Adjust green channel

12

CHROMA/B Knob

1: Adjust chroma 0 - 60 (30)
2: Adjust blue channe

TINT/SHARPNESS Knob

13

1: Adjust tint 0 - 60 (30)

MENU

BRIGHT/

EXIT

F2

9 10 11 12 13

8

CHROMA/

CONTRAST/

R

G

TINT/

SHARPNESS

B

1

HDMI terminal

1

HDMI input only

VIDEO terminal (BNC)

2

IN : Composite signal input terminal
OUT: : Input signal through-out terminal

3

YPbPr terminal (BNC)

IN : Component signal input terminal
OUT: : Input signal through-out terminal

4

SDI (HD/SD) terminal (BNC)

IN : SDI input terminal - 1.5G
OUT: : Input signal through-out terminal (Reclock)

Tally port

5

HD-15 connection

SDI

IN

OUT

2 3 4 5 6 7

1

30p

2

720p

25p

3

24p

4

1080p

24psf

5

ON

OFF

1 2 3 4 5

CAUTION: TURN OFF POWER

BEFORE ADJUSTING

SWITCHES

+ +

On

Switch

50p

1

30p

2

720p

25p

3

24p

4

1080p

24psf

5

ON

OFF

1 2 3 4 5

CAUTION: TURN OFF POWER

BEFORE ADJUSTING

SWITCHES

+ +

9

8

2: Adjust sharpness 0 - 60 (30)

User programmable function buttons.
For quick access, the user may program
the F1 and F2 buttons to enable frequently
accessed monitor features. Via the main
monitor configuration menu, either button
may be assigned to perform the following
functions: Window 1, Window 2, HV
delay, Blue Gun, and Pixel to Pixel, .

DIGITAL TO ANALOG CONVERSION [SDI > YUV]

The monitor can convert digital SDI signals to Analog YUV. A signal from the SDI will be
displayed on the YPbPr analog outputs. This is a straight digital to analog conversion only.
There is no up converting, down converting or standards conversion available in this feature.
This feature works in one direction SDI to analog. It will not work in reverse.

www.ikancorp.com 713-272-8822