ikan PP 3.0 User Manual
PrompterPro 3
Mac Software QUICKSTART GUIDE
Teleprompter Setting
Keyboard shortcuts:
P Pause/Resume
Space Bar Pause/Resume
> Speed Up
/ Speed Up x5
< Speed Down
M
H Horizontal Text Flip
V Vertical Text Flip
] Advance to Next Cue Point
[ Advance to Previous Cue Point
Cmd + O Open File
Cmd + S Save File
Cmd + H Show / Hide Tool bar
ESC Close Prompting
Installing PrompterPro 3 (Mac version only)
1. Insert the CD into the CD Drive on your MAC. (If your MAC does not have a CD Drive, you can
download the software at http://ikancorp.com/productdetail.php?id=389)
2. Open “Finder” on your MAC
3. Single-click on “PrompterPro 3.x.x” on the left panel underneath Devices
4. Double-click on the “MAC” folder, then double-click on the “PrompterPro 3” folder.
5. Double-click on “PrompterPro3.pkg”.
6. Follow the easy installation instructions.
Speed Down x5
Mouse shortcuts:
Mouse Wheel Speed Up or Slow Down
* PrompterPro 3 supports both RTF les and Text
les.
* For any additional questions about PrompterPro 3,
please call us at 713-272-8822.
Enter Activation Key
The rst time you open PrompterPro 3 after installation, you will be prompted to enter your Activation
Key. The Activation Key is provided on the CD case.
Please keep your Activation Key in a safe location.
QUICKSTART GUIDE
PrompterPro 3
Teleprompting Software for Mac
Supports OS X 10.7 and higher
on 64 bit processor
www.ikancorp.com
3903 Stoney Brook Dr. Houston TX 77063
© 2013 ikan Corporation. All right reserved
1.713.272.8822
support@ikancorp.com
PrompterPro 3
Mac Software Quickstart Guide
Instructions
Prompter Pro 3 for Mac saves your formatted
scripts as ISF (internal script les). If you want
to save your script as RTF or Text le, see
To save a script, go to File -> Save or key in
Cmd + S on your keyboard.
2. Save Scripts
Export Scripts below.
1. Import Scripts
Prompter Pro 3 for Mac supports RTF (rich text
les), TXT (plain text les) and ISF (internal
script les).
To import a le, go to File -> Open or key in
Cmd + O on your keyboard.
3. Export Scripts
Prompter Pro 3 for Mac allows you to export
your script as an RTF or Text le. Saving your
script as an RTF le will allow you to keep the
rich text formatting whereas saving it as a TXT
le will only keep the written text.
To export a script, go to File -> Export As and
then choose RTF or Text File.
4. Cue Points
Prompter Pro 3 for Mac allows you to set Cue
Points (also known as Chapter Bookmarks).
Setting Cue Points will enable you to jump
back and forward across these chapter points
in your script.
To add a Cue Point, select the exact place in
your script where you want to insert a Cue
Point and then click on the Add Cue Point
button.
You can also manage your existing points by
clicking on the Cue Points button.
5. Prompter Settings
Prompter Pro 3 for Mac allows you to present
prompter settings before you start your
teleprompting session.
To access your Prompter Settings, click on the
Start button.
a) Select Talent Display - If you have a 2nd
monitor connected to your Mac, you can
determine which monitor you want to designate
as the Talent Display and which monitor to
designate as the Operator Display. The
Operator Display will show onscreen prompter
controls while the Talent Display will not.
b) Flip Text - You have the option of both
horizontal and vertical text ip. if you have a
2nd monitor connected to your Mac, the text
ip will only be applied to the Talent Display.
c) Guide - You can show or hide the triangular
prompter guide.
Loading...