ikan PBK-A-C User Manual
PBK-A-C
Pro Battery Adapter Kit for Anton Bauer w/ Coax P-Tap
QUICKSTART GUIDE
What’s included
M-A Battery Plate
Pro Adapter Plate
4 x M4x.07 x 8mm Metric Socket Head Screw
Hex Key
Coax to Power Tap Cable
Checked by
CONDITIONS OF WARRANTY SERVICE
• Free service for one year from the day of purchase if the problem is caused by manufacturing errors.
• The components and maintenance service fee will be charged if the warranty period has expired.
Free Service will not be Provided in the Following Situations: (* Even if the product is still within the warranty period.)
• Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company.
• Damage caused by natural disaster, abnormal voltage, and environmental factors etc.
3903 Stoney Brook Dr. Houston TX 77063
1.713.272.8822
support@ikancorp.com
www.ikancorp.com
© 2010 ikan Corporation. All right reserved
PBK-A-C
Pro Battery Adapter Kit for Anton Bauer w/ Coax P-Tap
QUICKSTART GUIDE
Connect the Power Tab Cable to the VX7 monitor.
Remove the Phillips Head Screws to disassemble the M-A Battery Plate and the Pro Adapter Plate.
1
2
M-A Battery Plate
Additional Tool Needed:
Phillips Head Screwdriver
Install the M-A Battery Plate on to the VX7 monitor with the Phillips Head Screws.
-
+
HDMI
HDMI
OUT
OUT
VIDEO
VIDEO
IN
On
Switch
50p
1
30p
2
720p
25p
3
24p
Y/C
Y
Y
Pb
Pb
Pr
Pr
SDI
SDI
IN
4
1080p
24psf
5
ON
OFF
On
Switch
50p
1
1 2 3 4 5
30p
2
720p
25p
3
24p
4
1080p
24psf
5
ON
OFF
1 2 3 4 5
CAUTION: TURN OFF POWER
BEFORE ADJUSTING
SWITCHES
CAUTION: TURN OFF POWER
BEFORE ADJUSTING
SWITCHES
+ +
+ +
+
+
DC 12V - 20V
DC 12V
DC 12V - 20V
DC 12V
+
+
Pro Adapter Plate
Battery Plate Connector
NOTE:
Please make sure to insert the ‘D-tap Connector’ correctly into
the battery plate to insure the proper polarity (“D”shape of the
D-tap cable to the “D” shape of the battery adapter [See
diagram]). Failure to do so may result in damage to the battery
plate and/or to the product or products connected to the battery
plate. The ikan Corporation takes no responsibility for damage to
any product occurring as a result of the incorrect insertion of the
D-Tap Connector to the battery plate.
www.ikancorp.com 713-272-8822
Loading...