ikan KVF-1730W User Manual

KVF-3X series pull-out rackmount monitors

USER MANUAL

Shenzhen Konvision Technology Co., Ltd
http://www.konvision.com

Shenzhen Konvision Technology Co,.Ltd www.konvision.com

2

Contents

Notes ........................................................................................................................ 3

Security .................................................................................................................... 4

Screen Maintenance ...................................................................................... 4

Cabinet Maintenance ..................................................................................... 4

Installation ....................................................................................................... 5

Rackmount Installation .................................................................................. 5

Transportation ................................................................................................. 5

Features ................................................................................................................... 6

Parts and Their Functions ..................................................................................... 9

Front View ....................................................................................................... 9

Rear View ...................................................................................................... 12

OSD Menu ............................................................................................................. 13

Menu Structure ............................................................................................. 13

Menu Operation ............................................................................................ 15

Menu Item Description ................................................................................. 16

A. Picture ............................................................................................... 16

B. Img. Adj ............................................................................................. 16

C. Setup ................................................................................................. 18

D. Audio ................................................................................................. 20

E. PIP/PBP ............................................................................................ 21

F. Status ................................................................................................. 23

Factory Reset ........................................................................................................ 23

Remote Control..................................................................................................... 24

Shenzhen Konvision Technology Co,.Ltd www.konvision.com

3

●Notes

For the safety use of products, please read the following instructions
regarding the installatio n, use and maintenance carefully.

. Please read the product safety and operating in stru ctio ns c arefully before the product is

operated.

. Please keep the safety and operating instructions for future reference.
. Please pay strict attention to the warnings and implement the products according to the

operating instructions closely.

. All operating instructions should be strictly enforced.

1. Please use the power cord recommended by manufacturer.

2. Please do not place heavy objects on the power cord.

3. Please do not expose the monitors to rain, humid, dusty places.

4. Please do not place vessels with liquid (such as cups, beverage bottles) on the

monitor.

5. Please do not place this product in high heat places.

6. Please make sure the earth terminal is good in order to avoid electric shock.

7. Please do not open the back cover to avoid electric shock. Please contact

professionals for service nee d.

8. If the sound turns abnormal, please do not use the monitor for a long time..

9. Do not place this product at unstable places such as cars, shelves or tables, as it is

easy to make the product falling down, may cause severely h urt to children and ad ults
and also damage to the product.

10. Please do not touch the power plug with wet hands, as it will cause electric shock.

11. Please do not expose the LCD panel in direct sunlight for a long time, it will result in

damage or aging of the LCD panel.

12. Please display this product at a suitable temperature and humidity place.

13. Please do not spray any liquid things and/or add any objects into the monitor , it might

cause voltage instability and short-circuit, also can easily cause fires and blackouts.

Shenzhen Konvision Technology Co,.Ltd www.konvision.com

4

14. If do not us e the device for a long time, please un plug the power cord from the AC

outlet.

15. Please keep not less than 5cm space around the vents while using the monitor, in

order to obtain good heat dissipation effect.

●Security

Screen Maintenance

Please follow the below guide lines c arefu lly to prev ent dis colo ration, stains and scratches
on the screen:

- Avoid striking the screen with any object.

- Do not wipe the screen hard.

- Do not wipe the screen with solvents such as alcohol, thinner or gasoline.

- Do not spray detergent or other cleaners on the monitor or LCD panel, as it may cause

fault because of water droplets into the monitor.

- Do not write on the screen.

- Do not paste or stick any viscous markers on the screen.
Screen may be cleaned by gently wiping with lint free cloth to remove dust. For the more
difficult cleaning, use lint free cloth that has been very lightly dampened with detergent,
then dry any excess moisture from the monitor or LCD panel immediately to prevent
damage.

Cabinet Maintenance

Please follow the guidelines below to prevent potential damage.

- Do not wipe the cabinet with solvents such as alcohol,

- Do not use any pesticides and/or other volatile substances.

- Do not allow prolonged contact with rubber or plastic.

- Do not wipe the cabinet h ard. Use a soft , lint free cloth to clean. If the cabinet cleanin g is

more difficult, use lint free cloth that has been very light ly da mpened w ith det erge nt and

thinner or gasoline.

Shenzhen Konvision Technology Co,.Ltd www.konvision.com

5

then dry it to wipe.

Installation

- Keep adequate air circulation to prevent device internal overheating. Please do not

place the product on the surface of some certain objects (such as blankets, carpets,
etc.), as these objects may block the vents.

- Please keep the device away from heat gen erati ng sources, such as radiator, heaters

and air duct, also keep it away from much dust or mechanical vibration place.

Rackmount Installation

- For rack mount installation, please keep 1U space from both top and bottom to make

sure adequate air circulation, or install an external electric fan. Please follow the
instructions and install with the rack mounts provided by manufacturer.

Transportation

- This monitor is precise equipment and need professional packing materials to transport.

So do not to use packing materi als provided by suppliers except KONVISION or its
authorized packing material suppliers.

When the following situations occur, please turn off the power, do not
insert the plug and contact a professional service staff to deal with
timely.

A. This product smells smoke and off-flavor.
B. When this product displays abnormal operating conditions, such as there is no picture

or sound.

C. When any liquid is splashed into the product or product dropped.
D. When the product soaked or fall into the water.
E. When the product has been damaged or other damage circumstances.
F. When the power cord or plug is damaged.

Shenzhen Konvision Technology Co,.Ltd www.konvision.com

6

The following d oes not belong to fai lures:

1. If the static image displayed too long, it will have residual image, which should be

attributed to the characteristics of LCD display but not a failure. Residual image will
disappear automatically after a period of time.

2. If this device used in a cold environment, the screen may appear residual image.

This is not a product failure, when the monitor temperature changes, screen will
return to normal conditions.

3. LCD screen may appear tiny spots (red, blue or green), this is not a fault, LCD

screens are manufactured with high precision technology, and a small number of
pixels may not be able to show intermittent.

4. Lightly vibration when you touch the monitors.

5. Screen and cabinet will become warm gradually during operating.

6. When it appears cracked sound

7. When it appears sound of mechanical vibration.

●Features

High resolution LCD panel

- LED backlight and high resolution. High contrast, high-speed response and wide

viewing angle technology make the monitor can be used under variety of lighting
conditions.

Lightweight design

- Reduce installation space and load for OB vans, etc.

High brightness LED Tally Indicator

- Two colors Tally indicator as red and green, to monitor each input signal and check

ON-AIR mode.

Color system (PAL, NTSC, SECAM)

- This unit detects the color system automatically.
3D video decoder

Shenzhen Konvision Technology Co,.Ltd www.konvision.com

7

- Process 3D decoding on VIDEO signals, to realize better reduce cross color.

Motion-Adaptive Interlace to Progressive

- It converts interlaced video to progressive video by motion detection, redu ce the

serrated image.

10BIT Signal Processing

- Signal input, signal processing and image output are 10bit data processing, to

ensure the details display of the image.

Y/C Input

- Decomposition for the luminan ce signal (Y ) and chro minan ce signals (C ) of the v ideo

signal can be input through this connector.

SDI Input

- 3G/HD/SD-SDI video signal can be input through this connector.

YPbPr Input

- YPbPr video signal (Compatible YCbCr) can be input through this connector.

HDMI/DVI/VGA Input

- HDMI signal can be input via HDMI to DVI-I convertor through DVI connector, DVI

signal can be input thr o ugh D VI co nne ctor , VGA signal can be input via VGA to DVI-I
convertor through DVI connector.

Signal Source Loop through

Signal that linked to the input connector will be enlarged and linked to output connector.

PIP/PBP

- Two channel SDI inputs signals display simultaneously under PIP (picture in picture)

and PBP (picture by picture) mode.One SDI input signal can be also displayed with
another signal of VIDEO, S-VIDEO, COMPONENT, HDMI simultaneously, and
showing two pictures on the screen.

SWAP Function

- In PIP/PBP mod e, two pictures can be swapped between each other.

Color Temperature

- Different color temperatures can be selected freely and can be c ustomized R G B

gain and offset.

Shenzhen Konvision Technology Co,.Ltd www.konvision.com

8

Image Size Setting

- The display mode is switchable among 16:9, 4:3, full screen, 1:1, and the original

aspect ratio.

Marker Setting

- Show frame borders, center marker, and safety area, et c.

HV Delay

- Display horizontal and vertical blanking area of SDI2 input signal.

Scan mode

- Scan mode includes Full Scan, Over Scan.

Part Zoom In

- Zoom in any part of the picture, to watch picture details more clearly, and assist for

focus.

Audio level meter (UV+PPM)

- Show the audio level meter (UV+PPM) for SDI embedded audio

Brightness histogram

- System automatically analyzes the input signal’s brightness distribution with a

diagram on the screen. X coor dinate show s the bri ghtnes s sampl ing valu e, the range
is 0 ~ 1023, the higher value means the higher brightness. Y coordinate shows the
percentage of the brightness in the entire frame pic ture.

Vector scope

- Vector UV analysis for color bar signal input

Remote control function

- Available to connect to the remote terminal to operate the equipment to directly

select the input signal, longitudinal mode settings etc