iHome IBT3BC, IBT3LC, IBT3GQC User manual
iBT3
Splashproof
Wireless Speaker
with
CHARGE
BEFORE
USE
Questions? Contact Customer Service at 1-800-288-2792
Speakerphone
instruction
manual
iBT3
Introduction
Thank you for purchasing the iHome iBT3. This product is designed to provide high quality wireless sound
for your iPad, iPhone, iPod, computer, PDA or other Bluetooth audio device.
This instruction booklet explains the basic operation and care of the unit. Please read it carefully and keep
for future reference.
IMPORTANT INFORMATION ABOUT SPLASH RESISTANT USE
For proper splash-resistant operation, make sure the seal on the left side of the unit is completely flush
with the unit by pressing along the entire edge of the seal until it is completely and securely in place.
• The unit is IPX4 rated, meaning it will repel a stream of water for up to 5 minutes.
• DO NOT immerse the unit in water.
• Make sure seal and surrounding surfaces are completely dry before opening seal to prevent moisture
from damaging the internal electronics.
• Keep seal free of dirt, sand, or other objects that can interfere with proper sealing. If for any reason the
seal is not making a tight seal, water may enter the unit.
• DO NOT clean unit with oily soaps or use chemicals or solvents. Clean with damp cloth.
iBT3
Table of Contents
Included/ Meet Your iBT3/Status indicators ....................................................................... 1-4
Getting Started: Charging the unit .......................................................................................5
Using Bluetooth: Pairing Your Device .................................................................................... 6
Pairing with a Different Device/ Playing Audio Via Bluetooth ...................................................7
Speakerphone Operation ..................................................................................................8
Playing Audio via Aux In ................................................................................................... 9
Consumer Product Safety Guide................................................................................... 10-11
Troubleshooting..............................................................................................................12
Warranty......................................................................................................................13
Included
• iBT3 system
• micro USB charging cable
• carrying strap
iBT3
micro USB charging cableiBT3 system
1
carrying strap
Meet Your iBT3
iBT3
Right Side
Power/End Call
Button
Talk/Bluetooth Pairing/
Play/Pause Button
Reset Button
(insert paperclip
to reset unit)
Splash-resistant
Cover
+ Volume Button
Lanyard Loop
– Volume Button
Left Side
USB Charging
Port
Aux-in Jack
2
Top
iBT3
Status indicator
TIP: On some iOS (Apple) devices,
you can view the iBT3 battery status
on your device’s screen. When
device is paired and connected,
look for a vertical battery icon next
to the Bluetooth icon
on the upper right
corner of the device’s
screen.
Status indicator Status
Solid red LED
Flashing red LED*
Solid blue LED
Quickly flashing blue LED
Slowly flashing blue LED
*Flashes red 10x every minute
Unit is charging
Unit needs charging
Active Bluetooth connection / Aux mode
Unit is attempting to pair with Bluetooth device
Unit is attempting to auto link to already
paired Bluetooth device
Microphone
3
Loading...