Model: iBT374
Color Changing Rechargeable
Bluetooth Speaker
with Speakerphone
instruction manual
CHARGE
BEFORE
USE
iBT374
Introduction
Thank you for purchasing the iHome iBT374. This product is designed to provide high
quality wireless sound for your Bluetooth audio device wherever you take it. iP67 rating
means the unit is tested to be waterproof and dustproof. It also meets military specs for
being shockproof.
This instruction booklet explains the basic operation and care of the unit. Please read it
carefully and keep for future reference.
Maintenance
• Place the unit on a level surface away from sources of direct sunlight or excessive heat.
• Protect your furniture when placing your unit on a natural wood and lacquered nish.
A cloth or other protective material should be placed between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger
cleaning agents, such as thinner or similar materials can damage the surface of the
unit.
1
iBT374
IMPORTANT INFORMATION ABOUT
WATERPROOF OPERATION
For proper waterproof operation, make sure the waterproof cover on the right
side of the unit is completely ush with the unit by pressing along the entire
edge of the cover until it is completely and securely in place.
not
water
water
tight
tight
• The unit is IP67 waterproof rated, meaning it is immersible for up to 30
minutes at a depth of 1 meter (3 feet). It will typically withstand rain, snow
and being submersed in shallow water. Longer duration or deeper
immersion that exceeds the tested limits may cause product failure and
void the warranty.
• DO NOT immerse the unit in water for extended periods.
• DO NOT immerse the unit in water deeper than 1 meter (about 3 feet).
• Make sure cover and surrounding surfaces are completely dry before
opening cover to prevent moisture from damaging the internal
electronics.
• Keep rubber cover free of dirt, sand, or other objects that can interfere
with proper sealing. If for any reason the waterproof cover is not making a
tight waterproof seal water may enter the unit.
• Rinse with tap water after immersion in salt water or swimming pool.
• DO NOT clean unit with oily soaps or use chemicals or solvents. Clean with
damp cloth.
3