Transceiver
PC
USB cable
(third party)
A type
B type
USB DRIVER
INSTALLATION GUIDE
Thank you for using the Icom Download Service.
Please read this installation guide before installing the USB driver into your PC that is connected to the IC-7200
with the USB (Universal Serial Bus) cable (third party).
OVERVIEW
When the transceiver is connected to a PC with the
USB cable, the following operations can be performed;
• Remote control operation (CI-V: Icom Communication Interface-V) by the PC.
• Modulation input from the PC.
• Received audio output to the PC.
NOTE:
•
PC software (third party) may be required. (p. 18)
• The CT-17 ci-v level converter is required for remote control operation (CI-V) when the USB cable
is not used. See p. 88 in the IC-7200 instruction
manual for details.
• The transceiver connection may not be recognized by the PC because of the USB cable length.
Using the shorter USB cable as possible is recommended.
System requirements
The PC which supports the following OS (Operating
System) is required;
•
Microsoft® Windows Vista™
•
Microsoft® Windows® XP
•
Microsoft® Windows® 2000
NOTE:
• The USB driver is not supported for Microsoft®
Windows® XP (64 bit).
• Icom is not responsible for whole performance of
the PC that supports above OS.
• In this installation guide, the above OS are described as “Windows Vista,” “Windows XP” and
“Windows 2000.”
Item requirements
• USB cable (A-B type/third party)
• PC (with USB 1.1 or 2.0)
• Installed audio player
• PC software (third party)
- See p. 18 for details.
Icom, Icom Inc. and the logo are registered trademarks of Icom
Incorporated (Japan) in the United States, the United Kingdom, Germany,
France, Spain, Russia and/or other countries.
Microsoft, Windows and Windows Vista are either registered trademarks
or trademarks of Microsoft Corporation in the United States and/or other
countries.
All other products or brands are registered trademarks or trademarks of their
respective holders.
1
PRECAUTIONS
Before connecting to the PC
The process of connecting the USB cable (third party)
between the transceiver and a PC may differ according to your OS.
See the “Driver installation” on pgs. 4 to 11 for details.
•
After the driver installation is completed, the USB
cable can be connected regardless of the OS.
• The USB driver installation is required for each unit,
because of the COM port number difference.
Important
• Audio from the USB port may cut out or audio control with the PC software may get late because of
the PC performance (including OS, environment,
etc.)
• Audio from the USB port may cut out when the CPU
load increases.
• The audio device settings of OS may be changed
when the transceiver is connected to the PC.
•
Icom is not responsible for proper operation when
connecting the transceiver and the PC through an
USB hub.
For IC-PCR1500/IC-PCR2500 user
• USB driver on the supplied CD
The file that is included on the supplied CD with
the IC-PCR1500/IC-PCR2500 is the same as the
download file from Icom HP. So, the USB driver installation can also be performed with the supplied
CD.
•
USB driver uninstallation
If the USB driver uninstallation is performed, the
connected unit (when the USB driver is installed) or
IC-PCR1500/IC-PCR
2500 cannot be used.
• USB driver re-installation
The USB driver installation is required for each
unit, because of the COM port number difference.
S
ee the IC-PCR1500/IC-PCR2500 instruction manual when installing the USB driver with the supplied
CD.
PROCEDURE
Refer to the following steps for the USB driver installation.
Before installing the USB driver, log in as the administrator and quit all applications when Windows is running.
Overview
Precautions
Preparing
Driver installation
• System requirements (p. 1)
• Item requirements (p. 1)
• Before connecting to the PC (p. 2)
• Important (p. 2)
• For IC-PCR1500/IC-PCR2500 user (p. 2)
• Before installing the USB driver (p. 3)
• Windows Vista (p. 4)
• Windows XP (p. 6)
• Windows 2000 (p. 9)
COM Port Confirmation
Driver uninstallation
For your reference
• Windows Vista (p. 12)
• Windows XP/Windows 2000 (p. 12)
• Windows Vista (p. 13)
• Windows XP/Windows 2000 (p. 13)
• COM Port setting (p. 14)
• About audio (p. 16)
• Specifications (p. 19)
2
PREPARING
Before installing the USB driver
Icom HP gives the USB driver download service.
Before installing the USB driver, download the following compressed file.
• USB driver
(File name: 7200UsbDrv_v100.zip)
Icom is not responsible for any damage or lack of
data resulting from the use of the USB driver.
3
DRIVER INSTALLATION
Double click
Double click
Click
Click
Click
Windows Vista
NOTE:
• NEVER connect the transceiver to the PC with the USB cable (third party) until the USB driver installation
has been completed.
• The USB driver for Windows Vista does not support the automatic recognition system.
The displayed dialogue boxes, indications or operations may differ slightly from the following instructions according to your system conditions or environment.
q
Make sure that the transceiver is not connected to
the PC.
w Start up Windows.
• Quit all other application if running.
e Double-click the “WinVista” folder.
• The fol der c ons truction: “7200 Usb Drv_ v10 0” ➞
“Driver” ➞ “WinVista”
t “A program needs your permission to continue” dia-
logue box appears as below.
Click [Continue].
y Verify the installation location, then click [Install].
u Windows starts scanning for the system, then starts
installing the USB driver.
r Double-click the “CP210xVCPInstaller.exe” to start
up the USB driver installer.
i After the installation is completed, click [OK].
• Restarting the PC is recommended.
☞ Continues to the next page
4
Transceiver
PC
USB cable
(third party)
To USB jack
To USB port
Type A
Type B
KEY SEND ALC
REMOT E
DRIVER INSTALLATION
Windows Vista (Continued)
o After restarting the PC, connect the transceiver to
the PC with the USB cable (third party) as shown
below.
• Be sure to connect the USB cable correctly and not up-
side down.
!0 Turn the transceiver power ON.
• “Installing device driver software” appears as below.
!1 After the dialogue appears as below, USB driver
installation has been completed.
5
Transceiver
PC
USB cable
(third party)
To USB jack
To USB port
Type A
Type B
KEY SEND ALC
REMOT E
Click
Select
Click
Select
Click
Select
Select
DRIVER INSTALLATION (Continued)
Windows XP
NOTE:
BE SURE to connect the transceiver to the PC with the USB cable (third party) before installing the USB
driver.
The displayed dialogue boxes, indications or operations may differ slightly from the following instructions according to your system conditions or environment.
q
Make sure that the transceiver is not connected to
the PC.
w Start up Windows.
• Quit all other application if running.
e Connect the transceiver to the PC with the USB
cable (third party) as shown below.
• Be sure to connect the USB cable correctly and not up-
side down.
t The “Welcome to the Found New Hardware Wizard”
will come up as below.
Select “No, not this time,” then click [Next>].
y Select “Install from a list or specific location
(Advanced),” then click [Next>].
r Turn the transceiver power ON.
• “Found New Hardware” appears as below.
u Select “Search for the best driver in these locations.”
then select “Include this location in the search,” and
click [Browse].
☞ Continues to the next page
6
Loading...