INSTRUCTION MANUAL
STAND FAN ø 40Cm
Item No: IFS-1045
Thank you for your purchasing this fan. Please read all instructions carefully and keep for future
use.
Dear Customer,
Please read these operating instructions through carefully before connecting your device to the mains,
in order to avoid damage due to incorrect use. Please pay particular attention to the safety information.
STRUCTURE
1. FRONT GUARD
2. FAN BLADES
3. GUARD MOUNTING NUT
4. BACK GUARD
5. MOTOR SHAFT
6. MOTOR HOUSING
7. OSCILLATING KNOB
8. SWITCHES
9. SWITCH COMPARTMENT
10. LOCK SPRAIN
11. UPPER PIPE
12. PIPE CONNECTOR
13. LOWER PIPE
14. CROSS BASE
ASSEMBLY
1. Secure lower pipe with Pipe support to the hub of Cross Base with screw provided.
2. Extend upper pipe, insert the pipe connector through upper pipe onto lower pipe and tighten.
3. Attach the motor with switch compartment onto the upper pipe. Ensure the switch compartment
is pushed fully onto the upper pipe and secured with the screw provided.
4. Loosen Guard Mounting Nut from the Motor Housing.
5. Position Back Guard firmly to Motor Housing and then fasten by turning Guard Mounting Nut
clockwise tightly.
6. Push the Blade along Motor Shaft and fasten firmly with the Blade.
7. Hang the Front Guard to Back Guard with the position fixer provided at the rim of Guard, and
then fix together with clips provided.
OSCILLATION CONTROL
1. Push the oscillation knob to oscillate.
2. Pull the oscillation knob to stop.
CAUTION
1. Read and retain these instructions for future use.
2. Improper installation may result in the risk of fire, electric shock, or serious injury to persons.
3. Power plug must be removed from power socket before cleaning, servicing, maintenance and
when moving from one location to another.
4. The fan should be placed on a flat and stable surface when operating to avoid overturning.
5. The fan should not be placed in a damp place or where humidity is high (such as in a
bathroom).
6. Do not insert fingers or other objects through the fan guard.
7. Unplug from mains if not in use.
8. This is not a toy. Keep out of reach of children.
9. The appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning the use of the appliance by a person responsible for
their safety.
10. Children should be supervised to measure that they do not play with the appliance.
11. If the cord is damaged, it should be replaced by service agent or qualified technician.
TECHNICAL DETAILS
Model No. : IFS-1045
Power consumption: 50W
Main Voltage: 220-240V~50Hz
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL &
ELECTRONIC EQUIPMENT.
This mark on a product and/or accompanying documents indicates that when it is to be
disposed of, it must be treated as Waste Electrical & Electronic Equipment
(WEEE).
Any WEEE marked waste products must not be mixed with general household waste, but
kept separate for the treatment, recovery and recycling of the materials used.
For proper treatment, recovery and recycling; please take all WEEE marked waste to
your Local Authority Civic waste site, where it will be accepted free of charge.
If all consumers dispose of Waste Electrical & Electronic Equipment correctly, they will be
helping to save valuable resources and preventing any potential negative effects upon
human health and the environment, of any hazardous materials that the waste may
contain.
MANUEL D’INSTRUCTION
Ventilateur sur pied ø 40Cm
Article No : IFS-1045
Merci d’avoir acheté ce ventilateur. Merci de lire toutes les instructions attentivement et de vous y
référer ultérieurement.