IBM ThinkPad 600Xж Setup Manual

P/N: 08K9398

ThinkPad 600X

ThinkPad 600X

Setup Guide

Setup Guide

This guide provides information for setting up your computer for the first time.

Front view (with external diskette drive)

Liquid crystal display (LCD)

Built-in microphone

PC Card slots

PC Card eject buttons

Infrared port

Line-in jack

Headphone jack

Microphone jack

LCD latch

Video-out
connector

Hard-disk drive

System-status
indicators

Brightness control

Internal speakers

UltraslimBay

Click buttons

TrackPoint

Volume control

Battery indicator

Suspend indicator

External diskette
drive

Diskette eject
button

Rear view

Power switch

Universal serial bus (USB)
connector

Security keyhole

Serial connector

Power jack

External-monitor
connector

Parallel connector
System-expansion connector

Modem connector

Reset switch

External-input-device
connector

 Copyright IBM Corporation 1999. All rights reserved.

Setting up your computer

You are now ready to assemble and start your computer.

1

If you have a printer, open the connector cover. Connect
one end of the printer cable to the parallel connector and
the other end to your printer. Then power on the printer.

2

If you want to use the CD-ROM and the diskette drive at
the same time, you can attach the diskette drive to the
external-diskette-drive connector as follows:

Insert the diskette drive in the diskette-drive enclosure and
connect it firmly .1/. Connect the cable to the
external-diskette-drive connector .2/.

1

2

2

1

3

Connect the AC Adapter to the computer's power jack (at
the rear of the computer) in the order shown.

3

2

1

4

Open the liquid crystal display (LCD).
Pull the LCD latches .1/ and open the LCD .2/. Then

position the LCD so that it is convenient for viewing.

1

1

2