Hyundai KL22NS62, KL19NS62 User Manual

In case of smoke, strange noise or strange smell

from the unit:

Turn off the power switch immediately;
Disconnect the power plug from the power

outlet;

Contact your dealer or service centre. Never

attempt to make repairs yourself because this

could be dangerous.

High Voltage

Do not open

Risk of electronic shock, do not open.
Do not attempt to service this product yourself
as opening or removing covers may expose
you to dangerous voltage or other hazards.

Refer all servicing to qualified service personnel.

CAUTION

Important Safety Instructions

Important Safety Instructions and Maintenance

Never push objects of any kind into the set
through the cabinet slots as they may touch
dangerous voltage points or short-circuit parts that
could result in a fire or electric shock. Never spill
liquid of any kind on the set. Use special caution
in households where children are present. The
apparatus is not suitable for children under 3-year
to operate.

Power supply cords should be routed safety to
prevent life and property from dangerous with
damaged cord.
Mains plug is used as the disconnect device. It
shall remain readily operable and should not be
obstructed during intended use. To be completely
disconnected the apparatus from supply mains, the
mains plug of the apparatus shall be disconnected.
The apparatus shall be connected to a mains
socket outlet with a protective earthing connection.

To reduce the risk of fire or electric shock, do not

expose this product to rain or moisture.
The apparatus shall not be exposed to dripping
or splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.

To avoid the fire, no naked flame source,

such as lighted candles, should be
placed on the apparatus.

1

Important Safety Instructions and Maintenance

Important Safety Instructions

Always turn the set off when it is not being used.
Unplug the apparatus from the AC outlet when it will
not be used for a long period of time. And when there
is a lightning, unplug the unit from the AC outlet
immediately. Never touch the antenna wire during
lightning.

An outside antenna system should not be located in
the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such

power lines or circuits. When installing an outside

antenna system, extreme care should be taken to keep

from touching such power lines or circuits as contact
with them might be fatal.

Installation

The ventilation should not be impeded by covering the
ventilation opening with items, such as newspapers,
tablecloths, curtains, etc.
At least 10 cm space should be left around the
apparatus for sufficient ventilation.

The product should be situated away from heat
sources such as radiators,heat registers, stoves, or
other products (including amplifiers) that produce heat.
Place the apparatus in such a position that the screen
is not exposed to direct sunlight. It is best to have soft
indirect lighting while watching and avoid complete
dark environment and reflection from the screen as
these may cause eye fatigue.
Keep the product away from high magnetic field (i.e.
power-amplified power speaker) to avoid affecting the
tint;

2

Do not pull the plug out by the wire;
Never touch the plug with wet hands.

Excessive sound pressure from earphones and

headphones can cause hearing loss.

3

Important Safety Instructions and Maintenance

Installation

Do not place this apparatus near water, for example,
near a bath tub, wash bowl, kitchen sink, or laundry

tub; in a wet basement; or a swimming pool; and
the like;

Cleaning

When the TV being moved in from cold place, it needs

some right time for dew inside unit evaporating fully

before turn on the unit;

Unplug this apparatus from the AC outlet before

cleaning. Do not use liquid cleaners or aerosol

cleaners. Use a damp cloth for cleaning;

Do not place the set on an unstable cart, stand, table

or shelf. The set may fall, causing serious personal

injury as well as damage to the product. Use only with

the cart, stand, tripod, bracket, or table specified by

the manufacturer, or sold with the apparatus. An
appliance and cart combination should be moved with
care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart
combination to overturn.

To prevent injury, this apparatus must be securely

attached to the floor/wall in accordance with the

installation instructions.

Move

For your protection, please read this instruction completely, and keep this manual for

future reference.

5

General description 5
Specifications an d accessories 6
Overview 7
Basic operation 10
External connection 20
Trouble shooting 23
Picture defects and countermeasures 24

Basic operation

Contents

6

General description

Feature:

l Zero X radiation complies to green environment protection requirement
l Auto tuning and fine tuning
l One composite video input socket
l One S-Video input socket
l One PC VGA input socket
l One YPbPr input socket
l One HDMI input socket (HDMI 1.3)
l Two audio input sockets
l Headphones
l One AV output socket
l NICAM
l Multi-languageOSD
l Programmable TV sleep timer
l No-signal automatic power off function
l 256 total channels to preset
l PC VGA mode: VGA, SVGA, XGA, WXGA
l YPbPr mode: 480i, 480P, 576i, 576P, 720P, 1080i, 1080P
l HDMI mode: 480P, 576P, 720P, 1080i, 1080P

Note:

1. In case of any design change,a notice will not be released.

2. The composite video output function only support TV and AV input.

Specification

7

Specifications:

Accessories:

l User’s manual l Remote control
l Wall-mounted accessories: Two wall-mounted brackets, four fixed screws

and four fixed sleeves.(Optional)

Note:

1.Due to TV may be used with different display screen, weight marked in this
user's manual or in packaging box are subject to change without notice.

2.The illustrations and on-screen displays in this user’s manual are for
explanation purposes and may vary slightly from actual operations.In case of
any design change, a notice will not be released.

Specifications and accessories

1366X768

2WX 2

36W

AC ~110-240 V 50/6 0Hz

4.6 K g

5.0 .J

Des cription KL1 9NS6 2 KL22N S6 2

19" Diago nal (m ax.) 22" Diagonal (m ax .)

136 6X76 8

2WX 2

50W

Dimensions
(LXWXH)

TV with stand

TV without stand

458X2 09X3 57mm

;;PP

530 209 393

458X7 7X31 8mm

;;PP

530 77 

TV with stand

TV without stand

4.0 Kg

4.8 .J

8

Overview

1

. INPUT

Press this button to display the selected

signal source as main source.

5. MENU
Press this button to display OSD menu.

6. PROG /

Press these two buttons to select channel

or operate menu.

. Power switch

Press this button to turn TV on or off.

2. Power indicator
Blue: Normal playing status.
Red: Standby status.

3. IR remote sensor
Point remote control at this sensor to
conduct remote control.

4

7. VOL /
Press these two buttons to increase or
decrease the volume or operate menu.

8.
Press this button to enter standby mode
under normal play, and press this button
to enter normal play mode under standby
mode.

r s

r s

IR remote sensor

Power indicator

Power switch

Menu

Program up/down

Volume up/down

Standby

Input select

9

Overview

IN

AV AUDIO OUT

Audio out for external devices.

AV VIDEO OUT

Video out for external devices.

YPb/ C b Pr / C r

Connect to YPbPr/YCb Cr vide o.

Note: HDMI is supporting for DVI commutator.