HYUNDAI H-CMD4007 User Manual [ru]

EXCELLENCE

H-CMD4007

MULTIMEDIA DVD/CD/MP3 RECEIVER WITH BUILT-IN 3” TFT-DISPLAY

Instruction manual

МУЛЬТИМЕДИЙНЫЙ DVD/CD/MP3 РЕСИВЕР СО ВСТРОЕННЫМ 3” TFT-

ДИСПЛЕЕМ

Руководство по эксплуатации

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future.

Table of contents

Table of contents............................................................................................................................................. 2

Important safeguards ......................................................................................................................................3

Installation/ connection................................................................................................................................... 4

Controls........................................................................................................................................................... 6

General operations ........................................................................................................................................ 12

Digital tuner operations ................................................................................................................................16

Disc operations .............................................................................................................................................19

MP3 overview............................................................................................................................................... 28

System setup .................................................................................................................................................30

Handling discs .............................................................................................................................................. 34

Cleaning........................................................................................................................................................ 34

Troubleshooting guide .................................................................................................................................. 35

Specification ................................................................................................................................................. 36

Important safeguards

• Using the device at temperature below -10ºС may cause the breakage of the device. BEFORE USING

PLEASE HEAT UP THE PASSENGER COMPARTMENT TO THE RECOMMENDED TEMPERATURE!

• Read carefully through this manual to familiarize yourself with this high-quality sound system.

• Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.

• When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher

amperage rating may cause serious damage to the unit.

• DO NOT attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to the eyes.

• Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions, or

create safety hazards such as electrical shock or laser beam exposure.

• If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit.

• DO NOT open covers and do not repair yourself. Consult the dealer or an experienced technician for help.

• Make sure you disconnect the power supply and aerial if you will not be using the system for a long period

or during a thunderstorm.

• Make sure you disconnect the power supply if the system appears to be working incorrectly, is making an unusual sound, has a strange smell, has smoke emitting from it or liquids have got inside it. Have a qualified technician check the system.

• The unit is designed for negative terminal of the battery, which is connected to the vehicle metal. Please confirm it before installation.

• Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it may overload or burn out the power amplifier.

Installation/ connection

This unit can be installed in any dashboard having an opening as shown on the picture. The dashboard should be ~ 4.5 – 5.5 mm thick in order to be able to support the unit. First complete the electrical connections, and then check them for correctness.

Installation opening

1. Insert the unit holder into the dashboard.

2. Select the appropriate tabs and bend them the tabs 90 degrees to secure the holder in place.

3. Secure the rear of the unit. Fix the rear of the unit to the car body by rubber cushion.

1. Dashboard

2. Nut (5 mm)

3. Spring washer

4. Screw (5 x 25 mm)

5. Screw

6. Strap

7. Plain washer

4. Insert frame.

frame

Removing the unit

Insert fingers into the groove in the front of frame and pull out to remove the frame. (When reattaching the frame, point the side with a groove down wards and attach it.) Insert the levers supplied with the unit into the grooves at both sides of the unit as shown in figure until they click. Pulling the levers makes it possible to remove the unit from the dashboard.

lever

Electrical connection

Caution: Do not interchange the connection of the wiring!!! For some car models you may need to modify wiring of the supplied power cord. Contact your authorized car dealer before installing this unit.

Controls

Front panel

1. PWR/BACK button Press it to turn on the unit, press and hold more than 1 second to turn off. In setup menu, press it when you want to come back to the previous menu.

2. / buttons During playback press them to go to previous/next track. During playback press and hold them more than 2 seconds to start fast backward/forward playback. In Radio mode press them to start auto tuning. In Radio mode press and hold them more than 2 seconds to enter the manual tuning mode. Press them to decrease/increase the station manually.

3. VOL knob/MENU button Rotate VOL knob clockwise to increase the volume level; rotate anticlockwise to decrease the volume level.

Press the button to display the menu: AUDIO => PICTURE => EXPERT => TIME ADJ => DEFAULT.

4. PTY / BND/PLAY/PAUSE button In Radio mode press the PTY button to turn on/ off the PTY function. In Radio mode press the PTY/BND/PLAY/PAUSE button to select among three FM or one AM bands. Long press the button is ENTER function. During playback press the PTY/BND/PLAY/PAUSE button to pause or resume playing.

5. IR window

6. TFT display

7. EQ button Press the EQ button to select the corresponding preset modes to adjust the sound quality.

8. REL button Press the REL button to release the front panel.

9. TA / AMS/RPT button In Radio mode press TA button to turn on/ off the TA function. In Radio mode long press the AMS/RPT button, the stations will good reception are stored automatically to the preset channel, short press to scan the preset station. In playback mode press the AMS/RPT button to start repeat playing, press the button again to repeat the whole disc. Press the third time to cancel repeat function.

10. AF / MOD button In Radio mode press AF button to activate the AF function. Press the MOD button to select the mode: RADIO => DISC => USB => SD => AV.

11. MUTE button Press it to cut down the volume output, press it again to resume volume.

12. AV IN button Insert the AV cord, then press AV IN button to switch the AV mode.

13. USB slot

Inner panel

14. SD/MMC slot

15. Disc loading slot

16. EJECT button Press it to eject the disc.

17. RESET button Press the RESET button to set the unit with a ball-point pen or other pointed object to initial status.

Remote control

1. POWER button - press to turn on/ off the unit.

2. MODE button – press it to select the mode: RADIO => DISC => USB => SD => AV.

3. DISP button – in DVD mode press it to display Title Elapsed => Title Remain => Chapter Elapsed => Chapter Remain => Display OFF. In VCD/ CD mode: Single => Elapsed => Single Remain => Total Elapsed => Total Remain => Display Off.

4. EQ button – press to select the corresponding equalizer preset modes to adjust the sound quality.

5. SETUP button – in playback mode press to display system setting menu.

6. /, /, ▲/▼/◄/►, ENTER buttons – fast reverse/ fast forward, previous track/ next track, upwards/ downwards/ leftwards, rightwards. ENTER button - to confirm settings.

7. TITLE button – in DVD mode press it repeatedly to select different titles.

8. ANGLE button – press to change the viewing angle in DVD mode.

9. GOTO button – in DVD and VCD mode press it to go to a certain Title, CHAPTER, Title / Chapter time.

10. CLEAR button – press to activate delete the value inserted.

11. 10+ button (option).

12. RPT/ SEEK- button - - in playback mode, press to select the repeat mode. In radio mode, press to scan stations downwards.

13. (0-9) number buttons – press to select track, chapter or preset stations. In radio mode, press the 7 (TA)/ 8 (AF)/ 9 (PTY) button to select TA/ AF/ PTY function.

14. VOL-/ VOL+ buttons – press them to adjust volume level.

15. BACK button – press to come back last operation.

16. MUTE button - press it to cut down the volume output, press it again to resume volume.

17. SLOW+ button - press to slow the playback forward.

18. SLOW- - press to slow the playback reward.

19. MENU button – press this button to show the menu.

20. PBC button – for VCD disc press it to show the disc menu.

21. STOP button – press it to stop playback.

22. PLAY button - press it to start playback.

23. AMS/ PROG button – in radio mode, press to scan and automatically store station. In VCD/ CD mode press to set the program order to play.

24. ZOOM button – press to increase or decrease the picture size.

25. LOC/ SUB-T button – in Radio mode, press to select local or distant mode. In DVD playback mode press to change the subtitle language.

26. RDM/ SEEK+ button - in VCD/ CD mode, press to start random playing. In radio mode, press it to scan stations upwards.

27. BAND/ P/N button – in radio mode press it to select the desired band. In DVD/ VCD mode, press it to select PAL => MULTI => NTSC system.

28. ST/ AUDIO button – in FM mode, press it to select Stereo or Mono mode. In DVD/ VCD mode press to change the audio language.

Changing the battery

1. Press the catch and at the same time pull out the battery tray.

2. Insert the 1 x lithium battery, type CR 2025 3V battery with the stamped (+) mark facing upward. Insert the battery tray into the remote control.

Warning: Store the battery where children cannot reach. If a child accidentally swallows the battery, consult a doctor immediately. Do not recharge, short, disassemble or heat the battery or dispose it in a fire. Do not expose or bring into contact the battery with other metallic materials. Doing this may cause the battery to give off heat, crack or start a fire. When throwing away or saving the battery, wrap it in tape and insulate; otherwise, the battery may give off heat, crack or start a fire.

General operations

Reset the unit

Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press the REL button to remove the detachable front panel. Using a ball-point pen or other pointed object, press the RESET button to complete the initialization procedure.

Power on/off

Press the PWR/BACK button on the panel or the POWER button on the RC to turn the unit on. Press it for a long time on the panel or press shortly on the RC to turn the unit off. Note: After the unit is off, the volume level and radio current settings will be memorized, and when you turn the unit on it will resume the stored status that you set.

Volume control

Rotate the VOL knob on the panel clockwise or press the VOL+ button on the RC to increase the volume level. Rotate the VOL knob on the panel anticlockwise or press the VOL– button on the RC to decrease the volume level. Note: The volume level is from 0 (minimum) to 63 (maximum).

Mute function

Press the MUTE button to mute volume control. Press it again to resume the volume.

Mode selecting

Press the MODE button to select the mode: RADIO => DISC (if the disc is inside the unit) => USB => SD (if the SD/MMC card is inside the unit) => AV.

EQ function

Press the EQ button to enter the EQ menu. Rotate the VOL button to change the tone effect: FLAT => CLASSIC => POP => ROCK => JAZZ => OFF. OR please refer to SETTING THE AUDIO AND VIDEO CHARACTERISTICS title of this Instruction manual. Note: The factory default setting is OFF.

Setting the audio and video characteristics

• Press shortly and repeatedly the MENU button (VOL knob) on the panel or press the MENU button on the RC to enter the sound and video characteristics menu.

• Rotate the VOL knob on the panel or press the cursor ◄/►/▲/▼ buttons on the RC to select the submenu: AUDIO => PICTURE => EXPERT => TIME ADJUST => DEFAULT.

• Press the MENU button (VOL knob) on the panel or press the ENTER button on the RC to enter the submenu selected.

• Rotate the VOL knob on the panel or press the cursor ▲/▼ buttons on the RC to select the setting:

For Audio submenu: BASS => TREBLE => EQ => BALANCE => FADER => BASS. For Picture submenu: BRIGHTNESS => CONTRAST => COLOR => HUE. For Expert submenu: DX/LOC => ST/MONO => WOOFER => BEEP => LOUD. For Time adjustment submenu: TIME DISP => TIME FMT => HOUR => MINUTE. For Default item: When the item is selected press the MENU button on the panel or ENTER button on the

RC to set the default settings.

• When the setting is selected press the MENU button on the panel to activate the setting, rotate the VOL knob to adjust the setting. OR press the ◄/► buttons on the RC to adjust the setting:

For Audio submenu:

BASS, TREBLE: -14 … +14.

EQ: FLAT => CLASSIC => POP => ROCK => JAZZ => OFF. BALANCE: L=> R. FADER: R=> F.

For Picture submenu (adjustment is available in DVD mode only):

BRIGHTNESS, CONTRAST, COLOR, HUE: 0 … 63.

For Expert submenu:

DX/LOC: DX => LOC. ST/MONO: ST => MONO. WOOFER: ON => OFF. BEEP: ON => OFF. LOUD: ON => OFF.

For Time adjustment submenu:

TIME DISP: ON => OFF. TIME FMT: 12AM => 24. HOUR: 0 … 23. MINUTE: 0 … 59.

• Wait for 2 seconds or press the ENTER button, the setting will be saved automatically.

Note:

• If turning off the power all the settings of each mode will be saved.

• If turning off the ACC power or reset the unit all the settings will become as they were set on the plant.

• If you don’t adjust VOL knob/VOL+/- buttons within 3 seconds after selecting the desired setting, the unit

will automatically return to the current mode being displayed.

“Back” function

To return to previous menu window press the BACK button on the RC or PWR/BACK button on the panel.

Adjusting the time

Please refer to SETTING THE AUDIO AND VIDEO CHARACTERISTICS title of this Instruction manual.

Using the digit buttons

To insert any number use the digit buttons. To insert the 2-digit number use the digital buttons in sequence. For example, to insert number 14 press 1 => 4.

Information on the display

In DVD mode press the DISP button on the RC to display GO TO => SELECT. In VCD/ CD mode press the DISP button on the RC to display: Single => Elapsed => Single Remain => Total Elapsed => Total Remain => Display Off.

Digital tuner operations

Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not

available in your area, the following service is not available, either.

Band selection

Press the BAND / P/N button on the RC or BND / PLAY/PAUSE button on the panel to select a band: FM1, FM2, FM3, AM. Display will show the wave band, frequency.

Automatic/ Manual tuning

Automatic tuning: Press the / button on the RC to start auto searching the station. Manual tuning: Press and hold for 2 seconds the / button on the RC, press repeatedly the / button to

start manual searching the station. When the  button is pressed, the station is sought in the direction of higher frequencies. If the  button is pressed, the station is sought in the direction of lower frequencies.

Auto store

You can store up to a total of 24 radio stations in the memory (18 FM, 6 AM), manually or automatically.

• To store a station:

- Select a band (if needed)

- Select a station by / on the RC.

- Hold a Preset button (1-6) which you want to store the station for at least 2 seconds.

• To recall a station:

- Select a band (if needed)

- Press a Preset button (1-6) briefly to recall the stored station.

Preset scan function

Press the AMS/RPT button on the panel or press the PROG/AMS button on the RC to scan all preset stations in the memory of the current band and stay on each memory stations for about 5 seconds. To stop preset scan, press this button again.

Auto memory store function

Press the AMS/RPT button on the panel and hold for 2 seconds to enter auto store mode. The radio will automatically store the 6 strongest available stations to the 6 preset memories of the current band. To stop auto store, press this button again.

Local radio station search

Press and hold for 2 seconds the LOC/SUB-T button on the RC shortly to turn the LOCAL function ON or OFF. When the LOCAL function is on the local stations (stations with weak radio signal) can be played. When the LOCAL function is off both local and distant stations (stations with strong radio signal) can be played. Press the button again to turn it of.

Stereo/Mono reception

Press the ST/AUDIO button on the RC to select STEREO or MONO mode.

RDS function

There are the PI, PS, TP, PTY, TA, AF DATA. PI: Program Identification Code – for identifying code. PS: Program Service Name Broadcast – station name data expressed in alphanumerically character. TP: Traffic Program Identification – for traffic information broadcasting station. TA: Traffic Announcement Identification – showing traffic information is being transmitted or not.

AF: Alternative frequencies – frequency list of broadcasting station transmitting the same program.

AF function

Press the AF button briefly to switch on/ off mode. Symbol “AF” will appear on the display. Note: The tuner will return to Alternative Frequencies whenever the reception signals getting worse. “Alarm” will be displayed when an emergency broadcasting is received. Meanwhile sound output level will be adjusted to the preset output level automatically when the volume control is set at minimum.

PTY function

1. Press the PTY button to enter PTY mode.

2. Rotate VOL knob or press ▲/▼ on the RC to select the music type or speech type: NEWS, AFFAIRS,

INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, POP M, ROCK M, EAST M, LIGHT M, CLASSIC, OTHER M, WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ M, COUNTRY M, NATION M, OLDIES M, FOLK M, DOCUMENT, TEST, ALARM.

Note: While selecting PTY engagement, its selection is implement by preset button as described in notes.

3. When PTY is selected the radio starts to search corresponding PTY information and stops of the

corresponding PTY information is detected. If corresponding PTY information is not found, normal radio reception is resumed.

TA function

Press the TA button briefly to select the TA mode on/ off. Traffic announcement interrupts CD play or radio listening when broadcast. To interrupt traffic announcement press the TA button short without switching off the TA mode. The set will return to the previous operating mode.

Disc operations

Disc glossary

PBC (PlayBack Control)

PBC is a menu recorded on the disc with SVCD or VCD2.0 format. For the discs contained PBC, it can playback interactive software with the menu displayed on TV. And if the disc contains still images, it can playback high definition of still image.

Title

The title is the important part of DVD disc. The memory volume of the disc is rather big, that makes possible to record several films on one disc. For example, if a disc contains three films, they may be divided into Title 1, Title 2 and Title 3. You can easy use the functions of looking-for.

Chapter

A title can be divided into several blocks, so that every block can be operated as a unit, the unit is called chapter. The chapter contains a unit at least.

Track

It is the biggest component of VCD. Generally, every song of karaoke disc is a track.

Discs for playback

• This unit can play disc types: CD/DVD/DVD±R/±RW/CD-R/-RW/VCD.

• Compatible with formats: DVD-video/SVCD/VCD/HDCD/MP3/MP4/WMA/JPEG/DivX/MPEG4.

• The following file types are supported:

Audio files: MP3 (*.mp3) WMA (*.wma) Video files: MP4 (*.avi, DIVX3.11/4.0/5.0/6.0 and XVID) MPEG 2(*.vob) MPEG 1(*.dat) Picture file: JPEG (*.jpg)

• ISO 9660 or ISO 9660 +Joliet format - Max. 30 characters

• Max. Track number is 448

• Max. nested directory is 8 levels

• The max. album number is 99

• The max. length of each track is 99 minutes 59 seconds

• Supported sampling frequency for MP3 disc: 8 KHz – 48 KHz (44.1 KHz preferably)

• Supported bit-rates of MP3 disc are: 32 - 320 kbps (128 kbps preferably).

• Following formats are NOT supported *.ACC, *.DLF, *.M3U, *.PLS, MP3 PRO, files with DRM.

• Open session discs are NOT supported.

USB/SD/MMC notes

USB functions (flash memory type) MP3 music play.

1. SD/ MMC card support, 2in1 (SD/ MMC) support.

2. USB flash memory.

3. FAT 12/ FAT 16/ FAT 32 is possible

- FAT 12/16 (dir: 200 support, file: 500 support),

- FAT 32 (dir: 200 support, file: 500 support).

4. Filename: 32 byte/ Dir name: 32 byte.

5. Tag (id3tag ver2.0)

- Title/ Artist/ Album: 32 byte support.

6. Multi card reader not support.

7. USB 2.0 support.

Note: USB format supports 2.0.

Capacity: 8 MB ~ 1 GB. SD cards brands: Cannon, Fuji film, Palm, Motorola, Microsoft, IBM, HP, Compaq, Sharp, Samsung, etc. Capacity: 8 MB ~ 1 GB. MMC cards brands: Ericsson, Nokia, Motorola, HP, Palm, Sanyo, Microsystems, etc. Capacity: 16 MB ~ 1 GB.

Loading a disc

1. Turn the power on.

2. Press the REL button on the panel to open the front panel.

3. Insert the disc with the printed side facing upward into the slot.

4. Close the front panel.

5. Press the MODE button to select the DVD mode. The monitor will show the disc content. The DVD disc will play automatically. When the MP3 disc is loaded, press PLAY to start the playback.

6. To eject the disc at first press the REL button to open the front panel.

7. Press the EJECT button on the base to eject the disc.

8. Close the front panel.

Note: If a disc is left in the ejected position for 11 seconds, the disc is automatically reloaded (Auto reload). If you force a disc into before auto reloading, this can damage disc.

Inserting the SD/ MMC card and USB device

Insert the SD/MMC card or USB device into SD/MMC compartment or USB socket respectively. Then the playing mode will be changed into SD/MMC or USB mode automatically. The first card/ USB device track playback will start. Note: When SD/MMC card and USB device are both inserted into their compartment or socket, the playing mode will be changed into the mode of the later one. You can select the source using SOURCE button on the RC or MODE button on the panel.

Playing/ pausing

To ensure good system performance, wait until the unit finishes reading the disc information before proceeding. After inserting the disc playback will start automatically. Or press the BND / PLAY/PAUSE on the panel or press PLAY on the RC to start playback. Press the BND / PLAY/PAUSE on the panel to go into pause mode. In pause mode press it again or press PLAY on the RC to resume the playback.

Stop playback

During playback press the STOP button on the RC to stop playback. Press PLAY button to start playback for the place where it was stopped. Press STOP again to finally stop playback.

Playing the previous/ next track

During playback press the  button to start next track/chapter/title playback. Press the  button to move back to the beginning of the current track. Press it twice to move to the beginning of the previous track.

Fast-forward/ fast-backward playing

Press and hold the / buttons on the panel or press / buttons on the RC to select the speed of fast playing in backward or forward direction.

Slow playback

• During DVD / VCD playback press the SLOW-/+ button on the RC repeatedly to start slow forward playback. The speed will change the following way: 1/2 => 1/4 => 1/8 => 1/16 (forward).

Note: During the disc playback when Slow Playback gets to the beginning of the playing another track, it resumes normal playback.

Repeat playback

During playback press the SEEK-/RPT button on the RC or AMS/RPT on the panel to select the repeat mode: CHAPTER => TITLE => ALL => OFF.

Repeat A-B function (for DVD/ VCD discs)

1. During playback, long press the A-B button on the RC at the starting point of section you want to repeat (A).

2. Press the A-B again at the ending point of the section you want to repeat (B). Section A-B repeating starts.

3. Press it again to cancel the A-B repeat function.

Random playback

During disc playback press the RDM/ SEEK+ button on the RC to select start random playback. Press again to cancel.

+ 52 hidden pages