Hyundai H-1001 Instruction Manual

H-1001
RECORDER
ПОРТАТИВНАЯ МАГНИТОЛАPORTABLE RADIO CASSETTE
Руководство по эксплуатации Instruction manual
Instruction manual Instruction manual
Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in future.
Description
Top panel:
1. Left speaker
2. Antenna
3. Power indicator
4. Frequency tuning scale
5. Cassette door
6. Handle
7. Right speaker
8. VOLUME knob
9. Phone jack
10. Function (MIC/TAPE/RADIO) switch
11. AM/FM switch
12. Microphone
13. TUNING knob
14. PAUSE button
15. STOP/EJECT button
16. F.FWD button
17. REWIND button
18. PLAY button
19. RECORD button
Back panel (not indicated): Battery compartment AC power cord socket
1 2 3 4 5 6 7
8 9 10 11 12 13
14 15 16 17 18 19
2 3
Important safeguards
Attention: The Instruction Manual
contains important operating and maintenance instructions. For your safety, it is necessary to refer to the manual.
Dangerous voltage: Uninsulated
dangerous voltage that may be of sufficient magnitude to constitute a risk of electrical shock to persons is present within this product enclosure. Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions, or create safety hazards such as electrical shock.
Caution: Do not remove cover (or back).
Refer servicing to qualified service personnel.
General operations
Function switch
• Set to RADIO for:
- Radio reception;
- Cassette recording from the radio;
• Set to TAPE for cassette playback;
• Set to MIC for recording from the built-in
microphone.
Volume adjustment
The volume level of sound reproduced by the
speakers is adjusted by rotating VOLUME knob.
During recording, adjusting the volume only affects the monitor sound, not the content of recording.
Power supply
Battery operation
• The power cord should be disconnected.
• Open the battery compartment cover.
• Insert 4 UM-1 (D)-size batteries. Please observe correct battery polarity, otherwise the set will not work.
• Close the battery compartment cover.
AC operation
• Before the first connecting of the appliance, check that voltage indicated on the rating label corresponds to your local mains voltage.
• Plug the corresponding end of the cord into the AC power cord socket.
• Insert the plug into power supply.
• When the set is only used with AC or is not used for 2 weeks or more, please remove the batteries to avoid damage to the set from leakage of batteries.
This unit cannot be operated by batteries if the AC power cord is connected to the unit.
Stereo headphone use
For private listening, insert the plug of a stereo headphone (not included) into the phone jack. During use of headphones, the built-in speakers will disconnect automatically.
Radio operation
Operation
• Set Function switch to RADIO position.
• Select the needed broadcasting band with
AM/FM switch.
• Rotate TUNING knob to find the needed
frequency.
• To turn off the radio, set Function switch to
TAPE or MIC position.
Antenna
• For FM reception, adjust the telescopic antenna appropriately to obtain the best reception on the band selected.
• AM signals are picked up through the built­in ferrite antenna. The set should be placed to a position for the best reception.
Loading...
+ 6 hidden pages