Husqvarna J123L User Manual
EN
Operator's Manual
J-handle set 123L
p. 2-6
FR
Manuel d'utilisation
Kit de poignée en J 123L
p. 7-11
Read through the Operator‘s Manual carefully and
understand the content before using the machine.
These instructions supplement the instructions that were
included with the machine. For other procedures, please
refer to the operating instructions for the machine.
Lire attentivement et bien assimiler le manuel
d’utilisation avant de se servir de la machine.
Ces instructions sont un complément au manuel qui
accompagne la machine. Pour les autres instructions,
se reporter au manuel d’utilisation de la machine.
114 02 65-95
EN
Husqvarna AB has a policy of continuous product
development and therefore reserves the right to modify the
design and appearance of products without prior notice.
Read through the Operator‘s Manual carefully and
understand the content before using the machine.
These instructions supplement the instructions
that were included with the machine. For other
procedures, please refer to the operating
instructions for the machine.
CONTENTS
The J-handle set contains the
following parts:
Loop handle:
1 Loop handle
1 Spacer loop handle
1 Washer
1 Screw M6x40
List of contents
CONTENTS
Components in the J-handle set ........................................... 2
List of contents .................................................................... 2
SAFETY INSTRUCTIONS
Cutting equipment .............................................................. 3
Basic clearing techniques...................................................... 4
ASSEMBLY
Assembling the J-handle ...................................................... 5
Fitting the suspension ring ................................................... 5
Assembly of the blade and trimmer head.............................. 5
Fitting the combination guard, grass blade and grass knife ... 5
START AND STOP
Control before starting......................................................... 6
TECHNICAL DATA
J-handle set .......................................................................... 6
J-handle:
1 J-handle
3 Screws M5x16
1 Harness
1 Suspension ring
1 Grass blade
1 Support cup
1 Support flange
1 Nut
1 Box spanner
1 Transport guard
NOTE! The trimmer guard must be replaced with the
accompanying combination guard if a grass blade is fitted to
the machine.
WARNING!
!
Saw blades must not be fitted on a
machine equipped with a J-handle.
2 – English
SAFETY INSTRUCTIONS
EN
Cutting equipment
This section describes how through correct maintenance and
through using the right type of cutting equipment you can:
• Reduce the machine‘s tendency to kickback
• Obtain maximum cutting capacity.
• Increase the service life of the cutting equipment.
The three basic rules:
1)Only use the cutting
and guard equipment
we recommend! See
chapter “Technical
data“.
2)Keep the blade‘s teeth
well and correctly
sharpened! Follow our
instructions and use the
recommended filing
gauge. An incorrectly
sharpened or damaged
blade increases the risk
of an accident.
IMPORTANT INFORMATION
The section describes how through correct
maintenance and through using the right type of
cutting equipment you can reduce the machine‘s
tendency to kickback, obtain maximum clearing
capacity and increase the service life of the cutting
equipment.
• Only use the cutting and guard equipment we
recommend! See chapter
•
Refer to the instructions for the cutting equipment
for the correct winding of cord and for the
selection of the right cord diameter.
• Keep the blade’s teeth well and correctly
sharpened! Follow our recommendations. Also
refer to the instructions on the blade packaging.
WARNING!
Incorrect cutting equipment or an
!
incorrectly sharpened blade increases
the risk of kickback.
“Technical data“.
Filing the grass
blade
• See the cutting
equipment’s packaging for
correct filing instructions.
3)Check the cutting
equipment with regard
to damage and crack
formation. Damaged
cutting equipment
should always be
replaced.
• The blades are sharpened
using a single cut flat file.
• Sharpen all edges equally
to maintain the balance of
the blade.
English – 3
Loading...