Huawei WS880 User Manual

Obtaining More Information

POWER

LAN

RESET

ADSL

USB 3.0

Thanks for purchasing the WS880 802.11ac Wireless Router (WS880 for short).

This quick start will show you how to connect your WS880 to a network and access the Internet. The figures in this guide are for reference only. The appearance and display features may vary slightly depending on the actual product version.

WS880

A Phone

B Tablet

C Laptop

D Computer

E WS880

F Modem

G Telephone

I Splitter

in the website

Telepho ne wall jack

For the full user guide, visit http://www.huaweidevice.com. Enter search box and press

Please visit www.huaweidevice.com/worldwide/support/hotline for recently updated hotline and email address in your country or region.

Packing list: 1 x WS880, 1 x power adapter, 1 x network cable, 1 x Quick Start and 1 x Warranty Card.

Connecting Cables

Connect your devices in the sequence indicated in the following gure.

When conguring the WS880 for the rst time, use a network cable to connect the WS880 to a computer.

Enter

1 2 3 4 5

Powering On

With all the cables connected, plug the power adapter into the wall-mounted power outlet to power on the WS880. After the WS880 is powered on, the WS880 indicator turns on.

The following table lists how the indicators behave when the WS880 is operating correctly. If the indicators do not behave as expected, ensure that everything is plugged in correctly.

Indicator

USB Steady off

LAN Steady on

INTERNET Steady on

WLAN Steady on

WPS Steady off

Star ting up Working

• Steady off (No USB device connected to the USB port)

• Steady on (USB device connected to the USB port)

• Steady off (No LAN port connected to a computer)

• Steady on (any of the LAN1 to LAN4 ports connected to a computer)

• Steady off (WAN port not connected to a network)

• Steady on (WAN port connected to a network)

• Blinking (WAN interface is connecting to the network)

• Steady off (WLAN enabled)

• Steady on (WLAN disabled)

Press the WLAN button (more than 3 seconds) to enable/disnable WLAN.

•

Steady off (WPS disabled)

•

Blinking (WPS enabled

Press the WPS button(less than 3 seconds) to start WPS negotiation.

Steady on

After the WS880 power adapter is plugged into a wall-mounted power outlet:

• Touch the icon to turn all the indicators off or on.

• Touch and hold the icon for more than 2 seconds to power the WS880 off or on.

• Steady off (WS880 powered off)

• Steady on (WS880 powered on)

Expected State

)

Setting the Computer IP Address

The following example uses Windows 7 to describe how to set the computer IP address:

1. Cho o s e

Network and Internet Sharing Center

3. D o u bl e - cl i ck

Version 4 (TCP/IPv4)

Start

Control Panel

Network and

Internet Protocol

2. Choose

4. S e le c t

Change adapter settings

Rig ht-click and choose

automatically address automatically

Local Area Connection Properties

Obtain an IP address

and

Obtain DNS server

. Click OK.

Quick Setup

1. Open a browser. In the address box, enter Enter the login user name (

2. On the

3. On the

The following example uses Windows 7 to describe how to set up a wireless connection:

1. Cho o s e

Home

tab, click type and set network parameters based on the network provided by your Internet service provider.

You can choose network connection type.

Home

Save

To protect against unauthorized access, change your user name and password after the rst login.

tab, click

to complete the conguration.

Wireless Connection Setup

To obtain the default SSID and key, check the label on the rear panel. To better secure your WLAN, promptly change the SSID and key.

Start Network and Internet and Sharing Center adapter settings Network Connection Connect / Disconnect

. Right-click

admin

by default) and password (

Connect to The Internet

Connect automatically

Connect to Internet by WLAN

Control Panel

Network

Change

Wireless

, and cho ose

http://mediarouter.home

admin

. Then select a network connection

, WS880 will automatically select the

, set WLAN parameters, Click

2. From the wireless network list, select the WLAN provided by the WS 88 0.

Connect

Click

by default). Click

. Press

Enter

3. In the displayed dialog box, enter the WLAN key and click OK.

• After the SSID and key had been changed, your computer should use the new ones to establish a wireless connection to the WS880.

• By default, WLAN has enabled. When you don't use it, you can press the WPS/ WLAN button (more than 3 seconds) to disnable/enable WLAN.

QR Code Scanning

To use this function, your phone or tablet must have a QR code scanner installed.

You can use your phone or tablet to manage and congure your WS880. To do so:

Use the QR code scanner on your Android-based phone or tablet to scan the QR code on the security token card that pulls out from the top of the WS880.

RuMate

Enter With Huawei RuMate installed, your phone or tablet is ready to manage and congure your WS880.

If your phone or tablet is running iOS or Windows Mobile, download Huawei RuMate from the App Store or Windows Phone Store.

in the search box to download the Huawei RuMate software.

4. In the wirel ess netwo rk l ist , che ck t h e W L A N c on ne c t i o n s ta tu s . If th e s t a tu s i s computer is wirelessly connected to the WS880.

Connected

, the

0678

96722140_01

No part of this manual may be reproduced or transmitted in any form or by any means without prior

written consent of Huawei Technologies Co., Ltd. and its afliates ("Huawei").

The product described in this manual may include copyrighted software of Huawei and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders.

Trademarks and Permissions

, , and are trademarks or registered trademarks of Huawei Technologies Co.,

Ltd. Other trademarks, product, service and company names mentioned may be the property of their

respective owners.

Notice

Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and therefore may not be activated or may be limited by local network operators or network service providers. Thus, the descriptions herein may not exactly match the product or its accessories which you purchase.

Huawei reserves the right to change or modify any information or specications contained in this manual

without prior notice and without any liability.

DISCLAIMER

ALL CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR

CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL HUAWEI BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOSS OF PROFITS, BUSINESS, REVENUE, DATA, GOODWILL SAVINGS OR ANTICIPATED SAVINGS REGARDLESS OF WHETHER SUCH LOSSES ARE FORSEEABLE OR NOT. THE MAXIMUM LIABILITY (THIS LIMITATION SHALL NOT APPLY TO LIABILITY FOR PERSONAL INJURY TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH A LIMITATION) OF HUAWEI ARISING FROM THE USE OF THE PRODUCT DESCRIBED IN THIS MANUAL SHALL BE LIMITED TO THE

AMOUNT PAID BY CUSTOMERS FOR THE PURCHASE OF THIS PRODUCT.

Import and Export Regulations

Customers shall comply with all applicable export or import laws and regulations and be responsible to obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein.

To better understand how we protect your personal information, please see the privacy policy at http://consumer.huawei.com/en/privacy-policy/index.htm.

6 7 8 9

Safety information

This section contains important information about the operation of your device. It also contains information about how to use the device safely. Read this information carefully before using your device.

Electronic device

Do not use your device if using the device is prohibited. Do not use the device if doing so causes danger or interference with other electronic devices.

Interference with medical equipment

> Follow rules and regulations set forth by hospitals and health care facilities. Do not use your

device where prohibited.

> Some wireless devices may affect the performance of hearing aids orpacemakers. Consult your

service provider for more information.

> Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained

between a device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket.

Areas with ammables and explosives

> Do not use the device where ammables or explosives are stored (in a gas station, oil depot,

or chemical plant, for example). Using your device in these environments increases the risk of

explosion or re. In addition, follow the instructions indicated in text or symbols.

> Do not store or transport the device in containers with ammable liquids, gases, or explosives.

Operating environment

> Avoid dusty, damp, or dirty environments. Avoid magnetic fields. Using the device in these

environments may result in circuit malfunctions.

> Before connecting and disconnecting cables, stop using the device and disconnect it from the

power supply. Ensure that your hands are dry during operation. > Place the device on a stable surface. > Keep the device away from electronic appliances that generate strong magnetic or electric elds,

such as a microwave oven or refrigerator. > During thunderstorms, power off your device and remove all cables connected to it to protect

against lightning strikes. > Do not use your device during thunderstorms to protect your device against any danger caused

by lightning. > Ideal operating temperatures are 0°C to 40°C. Extreme heat or cold may damage your device or

accessories. > Keep the device and accessories in a well-ventilated and cool area away from direct sunlight.

Do not enclose or cover your device with towels or other objects. Do not place the device in a

container with poor heat dissipation, such as a box or bag. > To protect your device or accessories from fire or electrical shock hazards, avoid rain and

moisture. > Keep the device away from sources of heat and re, such as a heater, microwave oven, stove,

water heater, radiator, or candle. > Do not place any object, such as a candle or a water container, on the device. If any foreign

object or liquid enters the device, immediately stop using it, power it off, and remove all cables

connected to it. Then, contact an authorized service center. > Do not block device openings. Reserve a minimum of 10 cm around the device to dissipate heat. > Stop using your device or applications for a while if the device is overheated. If skin is exposed

to an overheated device for an extended period, low temperature burn symptoms, such as red

spots and darker pigmentation, may occur. > Do not touch the device's antenna. Otherwise, communication quality may be reduced. > Do not allow children or pets to bite or suck the device or accessories. Doing so may result in

damage or explosion. > The device should be installed and operated with a minimum distance of 20cm between the

radiator and your body.

> Keep the device in a place with good reception. The distance between the device and other metal

materials (such as metal brackets or metal doors and windows) should be greater than 25cm and the distance between the device should be greater than 30cm.

Child's safety

Comply with all precautions with regard to child's safety. Letting children play with the device or its accessories may be dangerous. The device includes detachable parts that may present a choking

hazard. Keep away from children.

Accessories

> Using an unapproved or incompatible power adapter, charger or battery may cause re, explosion

or other hazards.

> Choose only accessories approved for use with this model by the device manufacturer. The

use of any other types of accessories may void the warranty, may violate local regulations and laws, and may be dangerous. Please contact your retailer for information about the availability of approved accessories in your area.

Power adapter safety

> The power plug is intended to serve as a disconnect device. > For pluggable devices, the socket-outlet shall be installed near the devices and shall be easily

accessible. > Unplug the power adapter from electrical outlets and the device when not in use. > Do not drop or cause an impact to the power adapter. If it is damaged, take it to an authorized

service center for inspection. > If the power cable is damaged (for example, the cord is exposed or broken), or the plug loosens,

stop using it at once. Continued use may lead to electric shocks, short circuits, or re.

> If your device has been exposed to water, other liquids, or excessive moisture, take it to an

authorized service center for inspection. > Ensure that the power adapter meets the requirements of Clause 2.5 in IEC60950-1/EN60950-1

and has been tested and approved according to national or local standards.

Cleaning and maintenance

> During storage, transportation, and operation of the device, keep it dry and protect it from

collision. > If the device is not going to be used for an extended period of time, power it off, and remove all

cables connected to it. > If anything unusual occurs (for example, if the device emits smoke or any unusual sound or

smell), immediately stop using it, power it off, remove all cables connected to it, and contact an

authorized service center. > Do not trample, pull, or excessively bend any cable. Doing so may damage the cable, causing

the device to malfunction. > Before you clean or maintain the device, stop using it, stop all applications, and disconnect all

cables connected to it. > Do not use any chemical detergent, powder, or other chemical agents (such as alcohol and

benzene) to clean the device or accessories. These substances may cause damage to parts or

present a re hazard. Use a clean, soft, and dry cloth to clean the device and accessories.

> Keep the device and accessories dry. Do not attempt to dry it with an external heat source, such

as a microwave oven or hair dryer. > Avoid collision, which may lead to device malfunctions, overheating, re, or explosion. > Do not expose your device or accessories to extreme heat or cold. These environments may

interfere with proper function and may lead to re or explosion.

> Do not place magnetic stripe cards, such as credit cards and phone cards, near the device for

extended periods of time. Otherwise the magnetic stripe cards may be damaged. > Do not dismantle or remanufacture the device and its accessories. In case of damage, contact an

authorized service center for assistance or repair.

Disposal and recycling information

This symbol (with or without a solid bar) on the device, batteries (if included), and/or the

packaging, indicates that the device and its electrical accessories (for example, a headset, adapter, or cable) and batteries should not be disposed of as household garbage. These items should not be disposed of as unsorted municipal waste and should

be taken to a certied collection point for recycling or proper disposal.

For more detailed information about device or battery recycling, contact your local city ofce,

household waste disposal service, or retail store.

Disposal of the device and batteries (if included) is subject to WEEE Directive Recast (Directive 2012/19/EU) and Battery Directive (Directive 2006/66/EC). The purpose of separating WEEE and batteries from other waste is to minimize the potential environmental impacts and human health risk of any hazardous substances that may be present.

EU regulatory conformance

Statement

Hereby, Huawei Technologies Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

For the declaration of conformity, visit the web site www.huaweidevice.com/certication.

The following marking is included in the product:

This device may be operated in all member states of the EU. Observe national and local regulations where the device is used. This device may be restricted for use, depending on the local network.

Restrictions in the 2.4 GHz band: Norway: This subsection does not apply for the geographical area within a radius of 20 km from the

centre of Ny-Ålesund.

Restrictions in the 5 GHz band:

WLAN function of this device is restricted only to indoor use when operating in the 5150 to 5350 MHz frequency range.

WS880 802.11ac Wireless Router

Quick Start