Huawei Mate 20 X Getting Started
EVR-L29
Quick Start Guide
Know Your Device
NFC
5
4
2
6
3
1
Before using the device, familiarize yourself with its basic
operations.
l To power on your device, press and hold the power button
until the screen turns on.
l To power off your device, press and hold the power button,
and then touch .
l To restart your device, press and hold the power button,
and then touch .
l Press and hold the power button for 10 or more seconds to
forcibly restart your device.
Headset jack Fingerprint scanner
USB-C port Power button
Volume button Tips App
l Please keep the NFC area close to other devices or
objects while using the NFC function.
l Check out the pre-installed Tips app and master all the
great features on your device.
1
Getting Started
1
2
PS
l Do not insert or remove the SIM card when your device
is powered on.
l Ensure that the card is correctly aligned and its notch is
rst inserted into the card tray.
l Be careful not to scratch your device or hurt yourself
when using the eject pin.
l Store the eject pin out of the reach of children to
prevent accidental swallowing or injury.
l Do not use cut or modied SIM or NM cards (nano
memory cards) with your device as these may not be
recognized and could damage the card tray (slot).
l If your SIM card does not match your device, please
contact your carrier.
Follow the instructions in the following gures to set up your
device. Please use the eject pin included.
Insert the NM Card (nano memory card) into slot 2. If you
do not have one, you can purchase it from any ofcial
Huawei store.
2
Dual Card Dual Standby Single
Pass
Your device supports only dual card dual standby single pass,
which means you cannot use both SIM cards for calls or data
services simultaneously.
l When you are on a call using SIM card 1, SIM card 2 cannot
be used to make or answer calls. If someone calls SIM card
2, the caller will hear a voice message similar to "The
subscriber you dialed is out of the service area" or "The
subscriber you dialed cannot be connected for the moment,
please try again later." The actual message will vary by
service provider.
l When you are using SIM card 1's data service, SIM card 2's
data service will be disabled.
Your device's single pass feature helps reduce power
consumption and increase your device's standby time. It is not
related to your service provider's network conditions.
l You can enable call forwarding between SIMs on the
device to avoid missed calls.
3
Loading...