registered trademarks of Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names
mentioned are the property of their respective owners.
NO WARRANTY
THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”.
EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES
OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR
CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE
LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR
CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS,
REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.
Contents
Your Phone........................................................................................... 1
Keys and Functions ........................................................................... 2
FM Radio (Optional) .......................................................................12
Warnings and Precautions...........................................................13
i
Features marked with “Optional” are optional. These
features may vary according to certain models.
Your Phone
The following figure shows the appearance of your phone and
it is for your reference only.
1 Earpiece 7 Flashlight
2 Screen 8 # key
3 Left soft key 9 Number keys
4 Navigation key 10 End/Power key
1
5 Call/Answer key 11 Right soft key
6 * key 12 Charger jack
Keys and Functions
Press… To…
Make a call.
Answer a call.
Access Dialed calls in standby mode.
Power the phone on or off (by pressing and
holding the key for about 3s).
End or reject a call.
Return to the standby mode.
Access Menu in standby mode.
Select a highlighted item.
Access Contacts in standby mode.
Return to the previous menu.
2
Press… To…
Tur n th e Flashlight on (by pressing and holding
for about 3s or by pressing twice in
standby mode).
Tur n t he Flashlight off ().
Access the Alarm clock (
mode.
Access Call Records (
Access the Calculator (
Increase the volume (
volume (
Enter numbers, letters, and symbols.
Enter + in standby mode (by pressing and
) during a call.
holding the 0 key for about 3s).
Call the voicemail in standby mode (by pressing
and holding the 1 key for about 3s).
-
Speed-dial phone numbers in standby mode
(by pressing and holding the desired key 2–9
for about 3s).
Select a submenu item labeled with the
corresponding number.
3
) in standby
) in standby mode.
) in standby mode.
) or decrease the
Press… To…
Enter * (by pressing the key) or enter P (by
pressing and holding the key) in standby mode.
Display the symbol list in any input mode.
Enter #.
Lock the keypad in standby mode (by pressing
and holding the key for about 3s).
Switch between input methods in text editing
mode.
If the phone cannot be powered on after you press and
hold
, the battery may run out of power. In that
case, charge the phone for about five minutes (during
this period, the charging icon may not be displayed on
the screen), and then power on the phone again.
Screen Icons
Icon Description
Signal strength.
New text message.
4
Roaming.
Call forwarding enabled.
Alarms enabled.
Keypad locked.
Battery power level.
Standard profile activated.
Conference profile activated.
Outdoor profile activated.
Mute profile activated.
Customize profile activated.
FM Radio activated.
Missed call(s).
Installing the SIM Card
Before installing the Subscriber Identif ication Module (SIM)
card, ensure that your phone is powered off. When inserting a
SIM card, ensure that the golden contact area on the SIM card
is facing downward and that the beveled edge of the SIM card
is properly aligned with that of the SIM card slot.
5
Removing the SIM Card
Before removing the SIM card, ensure that your phone is
powered off.
If the phone does not work properly or if crashes occur,
you can press and hold the battery reset button on the
right side of the SIM card slot until the phone is
powered on again.
Charging the Battery
To charge the battery, do the following:
1. Connect the charger to an alternating current (AC) power
socket.
2. Connect the charger to the charger jack on the phone.
6
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.