1
HUAWEI FT2260 Home Phone
Connect Quick Start
Introduction
Top View
Note:
The figures are only for your reference, the actual shape and color of the product may
differ slightly.
7
8
9
10
1
2
3
4
5
6
2
* Note: Never place a USB-based device into the USB port of the Home Phone Connect under any
circumstances. Doing so may damage the device and negate its warranty. The port was designed
for diagnostic purposes only; it is not intended for customer use.
Bottom View
1 2 3
4
1
Battery cover
3
Battery slot
2
Battery port
4
Wall-mounting brackets
1
Power on/off switch
6
Antenna port
2
Telephone port 1
7
Signal strength indicators
3
Telephone port 2
8
Battery indicator
4
USB port*
9
Power indicator
5
DC 12V power port
10
Voice mail indicator
3
Installation
Installing the Battery
Note:
The system will stop charging the battery when the ambient temperature is outside of
the temperature range allowed for charging (14°F to 113°F).
When the power adapter is connected, the battery will automatically charge.
When fully charged, the battery will automatically stop charging.
Remove the battery if the device will be unused for a period exceeding 2 weeks.
The battery is intended for backup purposes only (in the event of a power failure).
The device takes 3.5 hours to charge fully. The charge time may be impacted by
environmental factors.
Talk time is about 2 hours and standby time is about 36 hours, but the actual values
vary with the network environment.
Remove the battery cover. Carefully insert the battery connection cable into the battery port. The
connection cable will click into place when correctly inserted. Place the battery in the battery slot
and return the battery cover.
Installing the Antenna
Make sure the device is turned off. Align the antenna with the antenna port on the device as
illustrated below. Screw the antenna into the port, ensuring that the connection is secure.
Loading...