Huawei ETS2008 Owner's Manual

HUAWEI ETS2008/2208/2508 Fixed Wireless Terminal

User Guide

Warnings and Precautions

To use HUAWEI Fixed Wireless Terminal (FWT) correctly, efficiently and safely, you should notice following cautions.

Basic Cautions

y Check fittings based on the packing list to make sure they are complete and

undamaged.

y Read this manual carefully before installing and using FWT.

Electronic Device

Switch your FWT off near high-precision electronic devices. The FWT may affect the performance of these devices.

Such devices include hearing aids, pacemakers, fire alarm systems, automatic gates, and other automatic-control devices. If you are using an electronic medical device, consult the device manufacturer and confirm whether the radio wave affects the operation of this electronic device.

Hospital

Pay attention to the following points in hospitals or health care facilities:

y Do not take your FWT into the operating room (OR), intensive care unit (ICU),

or coronary care unit (CCU).

y Switch your FWT off near medial devices. y Observe any instructions wherever the use of wireless device is prohibited.

Traffic Safety

y Do not use your FWT while driving. Secure the FWT on its holder. Do not place

the FWT on the seat or other places where it can get loose in a sudden stop or collision.

y Observe the rules and regulations of airline companies. Switch your FWT off

before boarding an aircraft.

Operating Environment

y Do not place magnetic storage media such as magnetic cards and floppy disks

near the FWT. Radiation from the FWT may erase the information stored on them.

y Do not put your FWT, battery, or other accessories in containers with strong

magnetic field, such as the induction cooker and microwave oven. Otherwise, circuit failure, fire, or explosion can be caused.

y Do not leave your FWT, battery, or power adapter in a high-temperature place

or use them in a place with flammable gas. Otherwise, malfunction of the products, fire, or explosion can be caused.

y Because FWT needs to eliminate heat during working, put the FWT and the

power supply in a ventilated and shadowy place. Never airproof the FWT or put

something on it or place it near water, fire as well as inflammable and explosive materials.

y Because FWT contains precision devices, you should put it in a dry place and

away from moist materials

y Before cleaning FWT, turn off the FWT, and then disconnect the power supply

and take out the battery. Before moving FWT, disconnect the external power supply

y Do not subject your FWT, battery, and power adapter to serious collision or

shock. Otherwise, battery leakage, FWT malfunction, overheat, fire, or explosion can be caused.

y Do not place sharp metal objects such as pins near the earpiece. The earpiece

may attract these objects and hurt you when you are using the FWT.

y Do not place the FWT in the area over the air bag or in the air bag deployment

area. Otherwise, the FWT may hurt you owing to the strong force when the air bag inflates.

y When lightning, if you use the power adapter, turn off the FWT and disconnect

the power adapter from external power supply. If outdoor antenna is used, turn off the FWT and do not touch the interface between FWT and antenna

y Put your FWT, battery, and power adapter in places beyond the reach of

children. Do not allow children to use the FWT, battery, or power adapter without guidance.

y Do not touch the antenna when a call is going on. Touching the antenna may

affect call quality and cause the FWT to operate at a power level higher than needed.

y The network signal condition will directly affect the quality and stability of the

call. Consequently, you should place FWT in a place where it can receive network signal well. Do not put FWT in a building with an iron or metal roof. The distance between FWT and other metal materials (such as metal brackets or metal doors and windows) should be greater than 25cm and the distance between FWTs should be greater than 30cm.

y Do not open the chassis in any case and the device should be maintained by a

qualified maintenance department.

y Without permission, you are not allowed to modify the architecture and security

design of FWT. You must bear any consequence resulted from the operation without permission

y Your FWT is designed to conform to the authoritative international radio

frequency (RF) specifications. Use FWT accessories approved by Huawei only.

Emergency Call

You can use your FWT for emergency calls. However, connections in all conditions cannot be guaranteed. You should never rely solely on the FWT for essential communications.

Battery

y If the battery fluid gets into eyes, do not rub them. Wash with clean water and

seek medical assistance immediately.

y If the battery fluid contacts skin or cloth, wash with clean water immediately to

avoid irritation to the skin.

y Do not dispose of the battery in fire. Otherwise, the battery may ignite or

explode.

y When installing the battery on your FWT, do not push the battery by force lest

battery fluid leak out or the battery crack.

y Do not connect two poles of the battery with metallic materials such as cables. y Do not disassemble the battery or solder the battery poles. Otherwise fluid

leakage, overheat, fire, or explosion can be caused.

y If there is battery leakage, smoke, or strange smell, stop using the battery and

keep it away from open flame to avoid fire or explosion.

y Disconnect the power adapter and take out the battery when FWT is not used

for a long time.

y Do select its self-contained complete battery and power adapter, otherwise,

FWT may be spoiled. Dispose of used batteries according to the instructions

y Dispose of the battery according to local laws or regulations.

Power Adapter

y Use AC power as specified for the power adapter. Any violation of this rule can

be caused in fire or malfunction of the power adapter.

y Do not short-circuit the power adapter. Short-circuiting the power adapter may

cause fire or malfunction of the power adapter.

y Remove the dust on the power plug regularly. y Do not use worn-out power cords. Otherwise, electric shock, short-circuiting of

the power adapter, or fire can be caused.

y Do not put the power adapter near the container filled with liquid such as water.

If the liquid comes into the power adapter, electrical leakage or other faults can be caused.

y If the liquid such as water comes into the power adapter accidentally, remove

the plug of the power adapter from the socket immediately.

y Disconnect the power adapter from the socket before cleaning or maintaining it.

Otherwise, electric shock or short-circuiting of the battery or power adapter can be caused.

y Ensure the plug of the power adapter is properly inserted into the power socket

when charging the battery. Improper insertion can be caused in electric shock, fire, or explosion.

y Do not place any heavy object on the power cord of the power adapter. Do not

damage, change, or pluck the power cord.

Environmental Protection

Abide by the local laws in proposing of the package materials of your handset, consumed batteries and used handsets, and try to recycle them.

Packing List

The FWT package box contains the following items. Check the items according to the following table. If any of the items is missing or damaged, contact your local

dealer.

Item Quantity Item Quantity

Main unit, handset, and coiled cord

Power adapter 1 Antenna (optional) 1

FWT User manual 1 Certificate of Quality 1

1 Battery (optional) 1

Front View of the FWT

2 3 4 5 6 7 8

No. Item Function

1 Indoor antenna Receives signals.

2 Display screen Displays the current operation of the FWT.

3 RING TYPE key

4 SET/STORE key

Press it to select the ring tone type. The FWT supports 11 ring tone types.

Press it to set and save various functions

5 RECEIVED

CALLS key

6 CANCEL key Press it to delete queried information.

Press

Press call.

In the input mode, press it once to delete a character. Press and hold it for three seconds to delete all characters.

to increase the volume during a call.

to decrease the volume during a

No. Item Function

7 RING VOLUME

key

8 DIALED key

9 END key

10 HAND-FREE key

11 CALL/REDIAL

key

12 Loudspeaker Produces sounds during conversations.

13 Handset

Retaining Clip

14 Heaver Press it to hang up a call or perform other

Press it to adjust the ring tone volume.

Press it continuously to query dialed numbers and call durations.

During a call, press it to end the call. When there is an incoming call, press it to reject

the call. When you are setting parameters, press it to end

the current operation. In the standby mode, press and hold it to switch

on/off the FWT.

In the standby mode, press it to make a call or receive an incoming call without lifting the handset.

In the standby mode, dial the telephone number on the screen. If there is no number on the screen, dial the previously dialed number.

After entering a speed dial number, press it to dial the speed dial number.

When there is an incoming call, press it to answer the call.

Holds the handset when the FWT is placed vertically.

operations.

+ 12 hidden pages