Huawei B310S 518 User Manual
B310 LTE CPE
Quick Start
31506955_01
1 Getting to know your B310
Power indicator
On: the B310 is powered on.
Off: the B310 is powered off.
Network mode
indicator
Steady cyan: connected to an LTE network.
Steady blue: connected to a 3G network.
Steady yellow: connected to a 2G network.
Steady green: connected to an Ethernet network.
Steady red:
– The SIM card is not recognized, the PIN has not
been entered, or the PIN verif ication failed.
– Failed to connect to a mobile network or an
Ethernet network.
Wi-Fi/WPS
indicator
Steady on: Wi-Fi turned on.
Blinking: a WPS connection is being set up.
Off: Wi-Fi turned off.
1
LAN/WAN
indicator
Steady on: LAN/WAN port is connected to a LAN
device or an Ethernet port.
Blinking: data is being transmitted through the
LAN/WAN port.
Off: LAN/WAN port is not connected to a LAN
device or an Ethernet port.
Signal strength
indicator
On: signal reception available (more bars mean
better reception).
Off: no reception.
SIM card slot
Install a standard SIM card to access the Internet via
an LTE/3G/2G data connection.
Telephone port
Connect to a telephone.
WPS button
Press and hold for 2 or more seconds until is
blinking to active WPS connection when Wi-Fi is
turned on.
Power button
Press and hold for about 3 seconds to power the B310
on or off.
Reset button
Restoring the default sett ings of the B310 will erase all
previous sett ings.
When the B310 is powered on, use a sharply pointed
object to press and hold for about 3 seconds until
indicator is blinking to restore the B310 to its
factory settings. After the factory defaults are
restored, the B310 will restart automatically.
Power port
Connect to compatible power adapter.
LAN/WAN port
Working as a LAN port when connected to a
computer, switch, or other LAN device.
Working as a WAN port when connected to an
Ethernet port on the wall.
2
2 Installation
Do not remove the SIM card when it is in use. Doing so will affect the perform ance of
your B310 and data stored on the SIM card may be lost.
Scenario 1: Accessing the Internet using an LTE, 3G, or
2G network
Step 1: Installing the SIM card
1. Slide off the card slot cover.
2. Insert the SIM card into the card slot. Ensure that the beveled edge of the SIM card
aligns with that of the card slot.
3. Close the card slot cover.
3
Step 2: Connecting cables
Power adapter
Computer
Telephone
Laptop, tablet, or smart phone
To preve nt interference caused by radio signals, place the B310 at least 1 meter (3.28
feet) away from telephone and other electrical devices.
The B310's power adapter model is HW-120100XYW. X and Y represent letters or
numbers that vary by region. For details about the specific adapter model, contact
an authorized dealer.
Do not connect the B310 to the telephone wall outlet (or any Public Switched Telephone
Network), because doing so could damage the B310 due to excessive heat.
Once connected to a power outlet, the B310 automatical ly powers on.
4
Loading...