Huawei B310 User Manual
B310 LTE CPE
Quick Start
31507294_01
1 Getting to know your B310
Power indicator
Network mode
indicator
Wi-Fi/WPS
indicator
On: the B310 is powered on.
Off: the B310 is powered off.
Steady cyan: connected to an LTE network.
Steady green: connected to an Ethernet network.
Steady red:
– The SIM card is not recognized, the PIN has not
been entered, or the PIN verification failed.
– Failed to connect to a mobile network or an
Ethernet network.
Steady on: Wi-Fi turned on.
Blinking: a WPS connection is being set up.
Off: Wi-Fi turned off.
1
LAN/WAN
indicator
Signal strength
indicator
SIM card slot
External antenna
port
Steady on: LAN/WAN port is connected to a LAN
device or an Ethernet port.
Blinking: data is being transmitted through the
LAN/WAN port.
Off: LAN/WAN port is not connected to a LAN
device or an Ethernet port.
On: signal reception available (more bars mean
better reception).
Off: no reception.
Install a standard SIM card to access the Internet via
an LTE data connection.
Connect to external antenna after remove the cover.
WPS button
Power button
Press and hold for 2 or more seconds until
blinking to active WPS connection when Wi-Fi is
turned on.
Press and hold for about 3 seconds to power the
B310 on or off.
Restoring the default settings of the B310 will erase
all previous settings.
is
When the B310 is powered on, use a sharply
Reset button
pointed object to press and hold for about 3 seconds
until
indicator is blinking to restore the B310 to
its factory settings. After the factory defaults are
restored, the B310 will restart automatically.
Power port Connect to compatible power adapter.
Working as a LAN port when connected to a
LAN/WAN port
computer, switch, or other LAN device.
Working as a WAN port when connected to an
Ethernet port on the wall.
Telephone port Connect to a telephone.
2
2 Installation
Do not remove the SIM card when it is in use. Doing so will affect the performance of
your B310 and data stored on the SIM card may be lost.
Scenario 1: Accessing the Internet using an LTE network
Step 1: Installing the SIM card
1. Slide off the card slot cover.
2. Insert the SIM card into the card slot. Ensure that the beveled edge of the SIM card
aligns with that of the card slot.
3. Close the card slot cover.
3
Step 2: Connecting cables
120100XYW. X and Y represent letters or
numbers that vary by region. For details about the specific adapter model, contact
Do not connect the B310 to the telephone wall outlet (or any Public Switched
Telephone Network), because doing so c
To prevent interference caused by radio signals, place the B310 at least 1 meter
(3.28 feet) away from telephone and other electrical devices.
The B310's power adapter model is HW-
an authorized dealer.
Once connected to a power outlet, the B310 automatically powers on.
Power adapter
Telephone
Computer
Laptop, tablet, or smart phone
ould damage the B310 due to excessive heat.
4
Loading...