THE BATTERY IS NOT CHARGED WHEN YOU TAKE IT OUT OF THE BOX.
DO NOT REMOVE THE BATTERY PACK WHEN THE DEVICE IS CHARGING.
YOUR WARRANTY IS INVALIDATED IF YOU OPEN OR TAMPER WITH THE
DEVICE’S OUTER CASING.
PRIVACY RESTRICTIONS
Some countries require full disclosure of recorded telephone conversations,
and stipulate that you must inform the person with whom you are speaking
that the conversation is being recorded. Always obey the relevant laws and
regulations of your country when using the recording feature of your PDA
Phone.
, , , ExtUSB, and HTC Care are trademarks and/or service
marks of High Tech Computer Corp.
Microsoft, MS-DOS, Windows, Windows NT, Windows Server, Windows
Mobile, Windows XP, Windows Vista, ActiveSync, Windows Mobile Device
Center, Internet Explorer, MSN, Hotmail, Windows Live, Outlook, Excel,
PowerPoint, Word, OneNote and Windows Media are either registered
trademarks or trademarks of Microsoft Corporation in the United States
and/or other countries.
Bluetooth and the Bluetooth logo are trademarks owned by Bluetooth SIG,
Inc.
microSD is a trademark of SD Card Association.
Ja
va, J2ME and all other Java-based marks are trademarks or registered
trademarks of Sun Microsystems, Inc. in the United States and other
countries.
All other company, product and service names mentioned herein are
trademarks, registered trademarks or service marks of their respective
owners.
HTC shall not be liable for technical or editorial errors or omissions
contained herein, nor for incidental or consequential damages resulting
from furnishing this material. The information is provided “as is” without
warranty of any kind and is subject to change without notice. HTC also
reserves the right to revise the content of this document at any time
without prior notice.
No part of this document may be reproduced or transmitted in any form or
by any means, electronic or mechanical, including photocopying, recording
or storing in a retrieval system, or translated into any language in any form
without prior written permission of HTC.
001-2008, Spb Software House. All Rights Reserved.
3
4
Disclaimers
THE WEATHER INFORMATION, DATA AND DOCUMENTATION ARE PROVIDED
“AS IS” AND WITHOUT WARRANTY OR TECHNICAL SUPPORT OF ANY KIND
FROM HTC. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
HTC AND ITS AFFILIATES expressly disclaim any and all representations
and warranties, express or implied, arising by law or otherwise, regarding
the Weather Information, Data, Documentation, or any other Products
and services, including without limitation any express or implied warranty
of merchantability, express or implied warranty of fitness for a particular
purpose, non-infringement, quality, accuracy, completeness, effectiveness,
reliability, usefulness, that the Weather Information, Data and/or
Documentation will be error-free, or implied warranties arising from course
of dealing or course of performance.
Without limiting the foregoing, it is further understood that HTC and
its Providers are not responsible for Your use or misuse of the Weather
Information, Data and/or Documentation or the results from such use.
HTC and its Providers make no express or implied warranties, guarantees
or affirmations that weather information will occur or has occurred as
the reports, forecasts, data, or information state, represent or depict and
it shall have no responsibility or liability whatsoever to any person or
entity, parties and non-parties alike, for any inconsistency, inaccuracy, or
omission for weather or events predicted or depicted, reported, occurring
or occurred. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING,
YOU ACKNOWLEDGE THAT THE WEATHER INFORMATION, DATA AND/OR
DOCUMENTATION MAY INCLUDE INACCURACIES AND YOU WILL USE
COMMON SENSE AND FOLLOW STANDARD SAFETY PRECAUTIONS IN
CONNECTION WITH THE USE OF THE WEATHER INFORMATION, DATA OR
DOCUMENTATION.
Limitation of Damages
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT
SHALL HTC OR ITS PROVIDERS BE LIABLE TO USER OR ANY THIRD PARTY
FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE
DAMAGES OF ANY KIND, IN CONTRACT OR TORT, INCLUDING, BUT NOT
LIMITED TO, INJURY, LOSS OF REVENUE, LOSS OF GOODWILL, LOSS OF
BUSINESS OPPORTUNITY, LOSS OF DATA, AND/OR LOSS OF PROFITS
ARISING OUT OF, OR RELATED TO, IN ANY MANNER, OR THE DELIVERY,
PERFORMANCE OR NONPERFORMANCE OF OBLIGATIONS, OR USE OF
THE WEATHER INFORMATION, DATA OR DOCUMENTATION HEREUNDER
REGARDLESS OF THE FORESEEABILITY THEREOF.
Important Health Information and Safety Precautions
When using this product, the safety precautions below must be taken to
avoid possible legal liabilities and damages.
Retain and follow all product safety and operating instructions. Observe all
warnings in the operating instructions on the product.
To reduce the risk of bodily injury, electric shock, fire, and damage to the
equipment, observe the following precautions.
ELECTRICAL SAFETY
This product is intended for use when supplied with power from the
designated battery or power supply unit. Other usage may be dangerous
and will invalidate any approval given to this product.
SAFETY PRECAUTIONS FOR PROPER GROUNDING INSTALLATION
CAUTION: Connecting to an improperly grounded equipment can result in
an electric shock to your device.
This product equipped with a USB Cable for connecting with desktop or
notebook computer. Be sure your computer is properly grounded (earthed)
before connecting this product to the computer. The power supply cord of
a desktop or notebook computer has an equipment-grounding conductor
and a grounding plug. The plug must be plugged into an appropriate outlet
which is properly installed and grounded in accordance with all local codes
and ordinances.
5
6
SAFETY PRECAUTIONS FOR POWER SUPPLY UNIT
• Use the correct external power source
A product should be operated only from the type of power source
indicated on the electrical ratings label. If you are not sure of the type
of power source required, consult your authorized service provider or
local power company. For a product that operates from battery power
or other sources, refer to the operating instructions that are included
with the product.
• Handle battery packs carefully
This product contains a Li-ion battery. There is a risk of fire and burns
if the battery pack is handled improperly. Do not attempt to open or
service the battery pack. Do not disassemble, crush, puncture, short
external contacts or circuits, dispose of in fire or water, or expose a
battery pack to temper
WARNING: Danger of explosion if battery is incorrectly replaced.
To reduce risk of fire or burns, do not disassemble, crush, puncture,
short external c
or dispose of in fire or water. Replace only with specified batteries.
Recycle or dispose of used batteries according to the local regulations
or reference guide supplied with your product.
atures higher than 60˚C (140˚F).
ontacts, expose to temperature above 60° C (140° F),
• Take extra precautions
• Keep the battery or device dry and away from water or any liquid
as it may cause a short circuit.
• Keep metal objects away so they don’t come in contact with the
battery or its connectors as it may lead to short circuit during
operation.
• Do not use a battery that appears damaged, deformed, or
discolored, or the one that has any rust on its casing, overheats, or
emits a foul odor.
• Always keep the battery out of the reach of babies and small
children, to avoid swallowing of the battery. Consult the doctor
immediately if the battery is swallowed.
• If the battery leaks:
• Do not allow the leaking fluid to come in contact with skin
or clothing. If already in contact, flush the affected area
immediately with clean water and seek medical advice.
• Do not allow the leaking fluid to come in contact with eyes.
If already in contact, DO NOT rub; rinse with clean water
immediately and seek medical advice.
• Take extra precautions to keep a leaking battery away from fire
as there is a danger of ignition or explosion.
SAFETY PRECAUTIONS FOR DIRECT SUNLIGHT
Keep this product away from excessive moisture and extreme temperatures.
Do not leave the product or its battery inside a vehicle or in places where
the t
emperature may e
window sill, or behind a glass that is exposed to direct sunlight or strong
ultraviolet light for extended periods of time. This may damage the product,
overheat the battery, or pose a risk to the vehicle.
PREVENTION OF HEARING LOSS
CAUTION: Permanent hearing loss may occur if earphones or
headphones are used at high volume for prolonged periods
of time.
NOTE: For France, Earphone (listed below) for this device have been tested
to comply with the Sound Pressure Level requirement laid down in the
applicable NF EN 50332-1:2000 and/or NF EN 50332-2:2003 standards as
required by French Article L. 5232-1.
• Earphone, manufactured by HTC, Model HS S200.
xceed 60°C (140°F), such as on a car dashboard,
7
8
SAFETY IN AIRCRAFT
Due to the possible interference caused by this product to an aircraft’s
navigation system and its communications network, using this device’s
phone function on board an airplane is against the law in most countries. If
you want to use this device when on board an aircraft, remember to turn off
your phone by switching to Airplane Mode.
ENVIRONMENT RESTRICTIONS
Do not use this product in gas stations, fuel depots, chemical plants or
where blasting operations are in progress, or in potentially explosive
atmospheres such as fuelling areas, fuel storehouses, below deck on
boats, chemical plants, fuel or chemical transfer or storage facilities, and
areas where the air contains chemicals or particles, such as grain, dust, or
metal powders. Please be aware that sparks in such areas could cause an
explosion or fire resulting in bodily injury or even death.
EXPLOSIVE ATMOSPHERES
When in any area with a potentially explosive atmosphere or where
flammable materials exist, the product should be turned off and the user
should obey all signs and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even death. Users are advised
not to use the equipment at refueling points such as service or gas stations,
and are reminded of the need to observe restrictions on the use of radio
equipment in fuel depots, chemical plants, or where blasting operations
are in progress. Areas with a potentially explosive atmosphere are often,
but not always, clearly marked. These include fueling areas, below deck on
boats, fuel or chemical transfer or storage facilities, and areas where the air
contains chemicals or particles, such as grain, dust, or metal powders.
ROAD SAFETY
Vehicle drivers in motion are not permitted to use telephony services with
handheld devices, except in the case of emergency. In some countries,
using hands-free devices as an alternative is allowed.
SAFETY PRECAUTIONS FOR RF EXPOSURE
void using your phone near metal structures (for example, the steel
• A
frame of a building).
• Avoid using y
microwav
our phone near strong electromagnetic sources, such as
e ovens, sound speakers, TV and radio.
• Use only original manufacturer-approved accessories, or accessories
that do not contain any metal.
• Use of non-original manufacturer-approved accessories may violate
your local RF exposure guidelines and should be av
INTERFERENCE WITH MEDICAL EQUIPMENT FUNCTIONS
This product may cause medical equipment to malfunction. The use of this
device is forbidden in most hospitals and medical clinics.
If you use any other personal medical device, consult the manufacturer
of your device to determine if they are adequately shielded from external
RF energy. Your physician may be able to assist you in obtaining this
information.
Turn your phone OFF in health care facilities when any regulations posted
in these areas instruct you to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy.
HEARING AIDS
Some digital wireless phones may interfere with some hearing aids. In the
event of such interference, you may want to consult your service provider,
or call the customer service line to discuss alternatives.
NONIONIZING RADIATION
Your device has an internal antenna. This product should be operated in
its normal-use position to ensure the radiative performance and safety
of the interference. As with other mobile radio transmitting equipment,
users are advised that for satisfactory operation of the equipment and
for the safety of personnel, it is recommended that no part of the human
body be allowed to come too close to the antenna during operation of the
equipment.
Use only the supplied integral antenna. Use of unauthorized or modified
antennas may impair call quality and damage the phone, causing loss of
performance and SAR levels exceeding the recommended limits as well
as result in non-compliance with local regulatory requirements in your
country.
oided.
9
10
To assure optimal phone performance and ensure human exposure to RF
energy is within the guidelines set forth in the relevant standards, always
use your device only in its normal-use position. Do not touch or hold the
antenna area unnecessarily when placing or receiving a phone call. Contact
with the antenna area may impair call quality and cause your device to
operate at a higher power level than needed. Avoiding contact with the
antenna area when the phone is IN USE optimizes the antenna performance
and the battery life.
Antenna location
General Precautions
• Heed service markings
Except as explained elsewhere in the Operating or Service
documentation, do not service any product yourself. Service needed
on components inside the device should be done by an authorized
service technician or provider.
• Damage requiring service
Unplug the product from the electrical outlet and refer servicing to
an authorized service technician or provider under the following
conditions:
• Liquid has been spilled or an object has fallen into the product.
• The product has been exposed to rain or water.
• The product has been dropped or damaged.
• There are noticeable signs of overheating.
• The product does not operate normally when you follow the
operating instructions.
• Avoid hot areas
The product should be placed away from heat sources such as
radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.
• Avoid wet areas
Never use the product in a wet location.
• Avoid using your device after a dramatic change in temperature
When you move your device between environments with very
different temperature and/or humidity ranges, condensation may
form on or within the device. To avoid damaging the device, allow
sufficient time for the moisture to evaporate before using the device.
NOTICE: When taking the device from low-temperature conditions into a
warmer environment or from high-temperature conditions into
a cooler environment, allow the device to acclimate to room
temperature before turning on power.
11
12
• Avoid pushing objects into product
Never push objects of any kind into cabinet slots or other openings
in the product. Slots and openings are provided for ventilation. These
openings must not be blocked or covered.
• Mounting accessories
Do not use the product on an unstable table, cart, stand, tripod,
or bracket. Any mounting of the product should follow the
manufacturer’s instructions, and should use a mounting accessory
recommended by the manufacturer.
• Avoid unstable mounting
Do not place the product with an unstable base.
• Use product with approved equipment
This product should be used only with personal computers and
options identified as suitable for use with your equipment.
• Adjust the volume
Turn down the volume before using headphones or other audio
devices.
• Cleaning
Unplug the product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning, but
NEVER use water to clean the LCD screen.
Contents
Chapter 1 Getting Started 21
1.1 Getting to Know Your Touch Phone and Accessories ......................... 22
Top panel ......................................................................................................................22
Left panel
Right panel
Front
Back panel ....................................................................................................................24
1.1 Getting to Know Your Touch Phone and
Accessories
Top panel
POWER
Press to turn off the display temporarily. To turn off
the power, press and hold for about 5 seconds.
For more information, see “Starting Up” in this chapter.
Speaker
Left panelRight panel
VOLUME UP
During a call or when
playing music, press this
button to increase the
volume.
VOLUME DOWN
During a call or when
playing music, press
this button to lower the
volume.
Stylus
(See “Stylus” in this
chapter for details.)
Front panel
Earpiece
Listen to a phone
call from here.
Touch Screen
HOME
Press t
o return to
the Home screen.
See Chapter 3 for
details.
TALK/SEND
Press to answer an
•
incoming call or
dial a number.
During a call, press
•
and hold to toggle
the speakerphone
on and off.
Press and hold to
•
use Voice Speed
Dial. (See Chapter
12 for details.)
Navigation Control
See “Navigation
later in this chapter for
details.
Control”
Getting Started 23
Second Camera
Use this camera for
video call conversations
or to take a self-portrait.
BACK
o return to the
Press t
previous screen.
END
• Press to end a call or
return
to the Home
screen.
• Press and hold to lock
the device.
(See “Long Press End
Key” under “Settings on
your Device” in Chapter
13 for details.)
24 Getting Started
Back panel
3.2 Megapixel Camera
See “Taking Photos and
Videos” in Chapter 11
for details.
Back Cover
Push the back cover
upward to remove it.
Bottom panel
Sync Connector/Earphone Jack
Connect the supplied USB cable to synchronize information
or plug in the AC adapter to recharge the battery. You can
also connect the supplied USB stereo headset for hands-free
conversation or for listening to audio media.
Microphone
Getting Started 25
Accessories
The product package includes the following items and accessories:
Battery
•
AC adapter
•
S
•
creen protector
•
Stereo headset
•
USB sync cable
•
Pouch
•
Quick Star
•
Getting Started and Application discs
•
Extra stylus
t Guide and TouchFLO 3D Guide
1.2 Installing the SIM Card and Battery
Always turn off your device before installing or replacing the SIM card and
battery. You also need to remove the back cover before you can install these
components.
To remove the back cover
Make sur
1.
Hold the device with both hands and the
2.
front panel facing down.
Push the back cover up with your thumb
3.
until it disengages from the device and then
slide it up to remove.
SIM card
The SIM card contains your phone number, service details, and phonebook/
message memory. Your device supports both 1.8V and 3V SIM cards.
NoteSome legacy SIM cards may not function with your device. You should
e your device is turned off.
consult with your service provider for a replacement SIM card. There may be
fees for this service.
26 Getting Started
To install the SIM card
Make sure your device is
1.
turned off.
Locate the SIM card slot, then
2.
insert the SIM card with its
gold contacts facing down
and its cut-off corner facing
out the card slot.
Slide the SIM card completely
3.
into the slot.
To remove the SIM card
Remove the battery if it is installed.
1.
Slide the SIM card out from the SIM card slot with your thumb.
2.
Battery
Your device comes with a rechargeable Lithium-ion or Lithium-ion polymer
battery and is designed to use only manufacturer-specified original
batteries and accessories. Battery performance depends on many factors,
including network configuration, signal strength, the temperature of the
environment in which you operate your device, the features and/or settings
you select and use, items attached to connecting ports, and your voice,
data, and other program usage patterns.
Battery life estimates (approximations):
Standby time: Up to
•
Up
Talk time: Up to 330 minutes for GSM
•
Up to
•
Video call time: Up to 145 minutes for WCDMA
Note Battery life is subject to network and phone usage.
Cut-off corner
SIM CARD
285 hours for GSM
to 396 hours for WCDMA
270 minutes WCDMA
Warning! To reduce risk of fire or burns:
• Do not attempt to open, disassemble, or service the battery pack.
• Do not crush, puncture, short external contacts, or dispose of in fire
er.
or wat
• Do not expose to temperatures above 60
• Replace only with the battery pack designated for this product.
ecycle or dispose of used battery as stipulated by local
• R
regulations.
To install the battery
Align the battery’s exposed
1.
copper contacts with the battery
connectors inside the battery
compartment.
Insert the contact’s side of the
2.
battery first and then gently push
the battery into place.
Replace the back cover.
3.
To remove the battery
Make sure your device is turned off.
1.
Remove the back cover.
2.
The top left and right sides of the
3.
battery have protruding grips. Lift a
protruding grip from either side to
remove the battery.
Battery grip
Getting Started 27
o
C (140oF).
28 Getting Started
1.3 Charging the battery
New batteries are shipped partially charged. Before you start using your
device, it is recommended that you install and charge the battery. Some
batteries perform best after several full charge/discharge cycles.
To charge the battery
Connect
1.
AC adapter to the sync connector
on your device.
Plug in the AC adapter to an
2.
electrical outlet to start charging
the battery.
NoteOnly the AC adapter and USB sync
Charging is indicated by a “breathing” white light around the Navigation
Control. As the battery is being charged while the power is on, a charging
icon also appears in the title bar of the Home screen. After the battery
has been fully charged, the Navigation Control LED shows a solid white light
and a full battery icon appears in the title bar of the Home screen.
For more information about the Navigation Control LED, see “LED Alerts” in
this chapter.
Warning! • Do not remove the battery from the device while you are charging it
the USB connector of the
cable provided with your device
must be used to charge the device.
using the AC or car adapter.
• As a safety precaution, the battery stops charging when it overheats.
2
1
Getting Started 29
1.4 Starting Up
After installing your SIM card and battery and charging the battery, you can
now power on and start using your device.
Turn your device on and off
To turn on the power
Press and hold the POWER button for a few seconds.
1.
When you turn on your device for the first time, a Quick Start Wizard
2.
guides you to set up regional settings, date and time, and password.
For more information about these settings, see Chapter 13. After the
Quick Start Wizard finishes, the device installs customization settings,
then restarts.
NoteAfter the device restarts, you may be prompted to set up an e-mail account.
For instructions on how to set up an e-mail account, see Chapter 6.
To turn off the power
1.
Press and hold the POWER button for a few seconds.
2.
Tap Yes when a message
turn off the device completely.
Auto configure the data connection settings
The first time you power on your device,
you will see a notification message from
Connection Setup. Connection Setup
automatically configures your device’s data
connections, such as 3G/GPRS, WAP, and MMS,
so that you do not need to enter the settings
manually for your device.
To automatically configure data connection
settings
1. When y
ou see the notification message
from the Connection Setup,
tap Yes.
prompts you to choose whether or not to
30 Getting Started
Note If you do not see the notification message, tap on the title bar to
2. If your SIM card supports multiple network operator profiles, a
message will appear with network profile choices. Select the profile
you want to use and tap OK.
3. Connection
connection settings.
4. After the Connection Setup completes the configuration, tap
For more
Switch to Sleep mode when not in use
Press and immediately release the POWER button to turn off the display
temporarily and switch your device to Sleep mode. Sleep mode
your device to a low power state while the display is off in order to save
battery power.
Your device automatically goes into Sleep mode when you leave the device
idle after a certain period of time. You will still be able to receive messages
and calls while your device is in Sleep mode. Pressing the POWER button
again or incoming calls/messages will wake up your device.
display the message.
Setup then starts to configure your device’s data
Restart.
information about Connection Setup, see Chapter 13.
suspends
Loading...
+ 99 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.