HPE QK711B Getting Started Guide

QuickSpecs

series SAN Director Switch Family

Overview

Page 1

Today we are witnessing continued exponential growth of mission-critical and business-critical workloads, increased server virtualization and accelerating all rel demands, organizations need to deploy infrastructure that can deliver greater consistency, predictability, and performance. F with ex growing business demands, organizations need to deploy infrastructure that can deliver greater consistency, predictability, a perform rapidly increasing cost next

Volatile Memory Express (NVMe) over Fabrics will provide even greater value through

significant performance gains. As companies redefine application performance with flash storage, they require networks that d ultra-low latency, higher capacity bandwidth, and greater reliability.

HPE StoreFabric B-series SAN Director Switch Family

The breakthrough pe

HPE StoreFabric SN8600B

HPE offers the most complete and comprehensive Gen 6 (32Gb) Director operational stability, easy manageability and redefining application performance. Breakthrough 32 Gbps performance acceler application response time, eliminating I

based storage. pluggable components and a no

class director for today’s storage

infrastructure.

The HPE SN8600B SAN Director is available in two modular form factors to increase business agility connectivity and flexible deployment offerings.

Each blade slot can be popu

The chassis connectivity leverages optical Inter-Chassis Links (ICLs), which provide 128 Gbps bandwidth through a QSFP link.

HPE StoreFabric B-

-flash storage technologies that have an ever-increasing requirement for 100% availability and

iability leading to infrastructure complexity and growing management costs. To meet these dynamic and growing business

ponential data growth, the network must evolve to enable businesses to thrive in this new era. To meet these dynamic and

ance. The newest and most exciting storage advancement today is flash-based storage. The unprecedented speed and

-effectiveness of flash-based products are dramatically accelerating data center transformation. Tomorrow,

-generation flash storage based on Non-

aced

eliver

HPE StoreFabric SAN Directors are the industry's leading Fibre Channel switching infrastructure solutions, combining

rformance, scalability, simplified manageability and energy efficiency with long-term investment protection.

32Gb SAN Directors

s combines innovative hardware, software, and integrated network sensors, ensuring the industry’s highest level of

SAN Director products. The SN8600B Gen 6 (32Gb) SAN

/O bottlenecks and unleashes the full performance of flash and next generation NVMe-

They consistently deliver five-9s availability in the world’s most demanding data centers. And with non-disruptive, hot-

-single-point-of-failure design, the SN8600B is truly the enterprise-

• Built for large enterprise networks, the SN8600B 8-slot Director is a 14U chassis and has eight vertical blade slots to

provide up to 384 32 Gbps Fibre Channel device ports and 32 additional 128 Gbps Inter-Chassis Link (ICL) ports. This provides up to 16.2 Tbps of chassis bandwidth to address next-generation I/O- and bandwidth-intensive applications.

• Built for midsize networks, the SN8600B 4-slot Director has four horizontal blade slots to provide up to 192 32 Gbps Fibre

Channel device ports and 16 additional 128 Gbps ICL ports. This provides up to 8Tbps of aggregate chassis bandwidth and are ideal foundation for highly virtualized environments.

with seamless storage

ates

lated with two optional blades

• For device connectivity, the HPE StoreFabric 48-port Fibre Channel port blade provides 48 32 Gbps Fibre Channel ports.

This is available in 2 options - Bundled with 48 32Gb SFP+ and Standard configuration (without SFP+).

• To support disaster recovery and data protection storage solutions over long distances, the HPE StoreFabric SAN

Extension Blade provides 16-port for 32 Gbps Fibre Channel connectivity, 16-port for 1/10 Gigabit Ethernet (GbE) connectivity, and 2-ports for 40 GbE connectivity for Fibre Channel and IP replication traffic. This is available in 2 options Bundled with (16) 32Gb SFP+ and Standard configuration (without SFP+).

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

Product Highlights

Page 2

These links can support up to 2 kilometers and connect up to 8 SN8600B Directors, enabling flatter, faster, and simpler fabrics that increase consolidation while reducing network complexity and costs.

ICLs enable scalable core

switch cabling by 75 percent and free up to 25 percent of ports for servers and storage. This maximizes overall port density within smallest amount of rack space w

The SN8600B 8 SN8600B 4 backward (4×16).

The Power Pack+ set of tools monitors the network's health and performance. It is pre

Slot Director and SN8 enabling infrastructure management through a single Software) degraded application performance at host and storage tiers, reducing time to resolution.

IO Insight proactively monitors IO performance and behavior through integrated network sensors, providing deep insight into problems device port, which feeds a monitoring policy that measures thresholds and generates alerts. Integrated application IO latency and IOPS monitoring provides the ability to baseline application performance and detect degraded performance. Integrated network sensors provide IO performance management that is designed to avoid dependence on invasive and disruptive physical t

For investment protection, HPE SN8600B Directors offer three generations of backward 8, and 16 Gbps Fibre Channel products. Furthermore, the SN8600B Directors supports future Fibre Channel generations as a

ready storage networking platform and allows for current Gen 6 and future generation switch blade modules to be added within chassis

-edge and active-active mesh chassis topologies. These high-density chassis topologies reduce inter-

-slot Director supports 32 ICL ports, providing the equivalent of 128 32 Gbps ports (4.096 Tbps), and the

-slot Director supports 16 ICL ports, providing the equivalent of 64 32 Gbps ports (2.048 Tbps). SN86000B ICLs are

-compatible and can connect to SN8000B ICL ports, including connectivity with 2 km QSFPs at Gen 5 speeds of 16 Gbps

hile freeing up front-facing device ports for server and storage connectivity.

Also, SN8600B ICLs allow multi-director connectivity without the Enterprise ICL license anymore.

600B 4-Slot Director. Power Pack+ also provides the foundation for integration into HPE storage management tools,

-pane-of-glass. The Fabric Vision technology (Included in HPE PowerPack+

-configured on every SN8600B 8-

now includes IO Insight Software, which provides deeper visibility into the performance enabling quick identification of

and helping to ensure service levels. This capability non-disruptively and non-intrusively gathers IO statistics from any

- and device-level

aps.

-compatibility support for connectivity to 4,

the

Gen 7

the

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

Product Highlights

Page 3

HPE StoreFabric SN8600B 8-slot 32Gb SAN Director

HPE StoreFabric SN8600B 4-slot 32Gb SAN Director

HPE StoreFabric SN8000B 16Gb SAN Director

The SN8000B Directors were designed to unleash the full potential of private cloud storage and virtualization. With

scalability and port density transforming current SAN fabrics into cloud

HPE SN8000B

Director

performance, and functionality. The SN8000B 4

8Gb and 16Gb Fibre Channel blades

for mid

The SN8000B SAN Directors provide up to provide up to 32 QSFP based Inter Chassis Links (ICLs) which are equivalent to 128 16Gb FC ports C 1024

HPE for 16/10/8/4/2 Gbps Fibre Channel, FICON, FCIP

To help percent uptime in the world's most demanding data centers.

The Power Pack+ set of tools monitors the network's health and performance. It is pre-configured on every SN8000B 8-Slot Director

a 14U chassis and supports 8Gb and 16Gb Fibre Channel blades for large enterprises to deliver higher scalability and port density

-size enterprises as the core of their SANs.

hannel blade options including 32, 48 and 64 port 16Gb blades. They provide up to 10.2Tbps of total aggregate bandwidth and

Gbps of slot bandwidth and are the ideal foundation for private cloud storage and highly virtualized environments.

SN8000B SAN Directors offer multi-protocol support through various blades with autosensing support, depending on model,

reduce downtime costs, SN8000B SAN Directors leverage the core B-series technology performing at greater than 99.999

, 16 Gbps performance, reliability, and functionality, the SN8000B Directors are the strategic platform for

-optimized SANs.

SAN Directors are based on the same core technology and consist of two form factors. The SN8000B 8-Slot

-Slot Director is a 9U chassis and also supports

512 16Gb FC ports using the 64-port 16Gb Fibre Channel Blade. These directors also

and FCoE.

. They support a range of Fibre

higher

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

Product Highlights

Page 4

and is available pre-configured or as an upgrade for every SN8000B 4-Slot Director. Power Pack+ also provides the foundation for integration into

Features exclusively available on the SN8000B SAN Directors:

The following features are available on HPE SN8000B

c Operating System

functional and stress testing of

HPE SN8000B 8-Slot SAN Director

HPE SN8000B 4-Slot Director

HPE storage management tools, enabling infrastructure management through a single-pane-of-glass.

• A 64-port 16Gb FC High Density Blade for the SN8000B is available offering high density port counts. It scales up to 512

16Gbps ports with a total system bandwidth of 10.2 Tbps. Compared to the 64 port 8Gb FC blade, the new 64-port 16Gb FC blade increases port density by 33%, reduces cabling by 75% and lowers TCO by providing the lowest Watts/Gb.

• There is a common ICL POD (Ports on Demand) license between SN8000B 8-Slot and 4-Slot chassis. A single ICL POD

license will enable 16 QSFP ICLs or 1Tbps of bandwidth in both SN8000B 8-Slot and 4-Slot Director. A subsequent ICL POD license will enable an additional 16 QSFP ICLs or 1Tbps in SN8000B 8-Slot Director. The optional Enterprise ICL POD license allows you to connect four or more other SN8000B Director Chassis using ICLs.

SN8000B SAN Directors allow customers to configure a port on the 16Gb 32-port and 48-port blades at 10Gb FC speed.

•

The 10Gb port speed setting is not supported on the 16Gb 64-port blade. This is available for DWDM metro connectivity and will be enabled by a slot based 10GE license.

• SN8000B SAN Directors provide features like in-flight encryption and compression as part of base Fabri

(FOS) with any 16Gb blade. The Diagnostic Port (D-Port) Optic Health Monitoring provides cables and optics. They use the capabilities of FOS, Director ASIC, and B-series 16Gb optics and are available on 16Gb port blades with 16Gb B-series optics without any additional software license.

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

Product Highlights

Page 5

What's New

• Introducing HPE StoreFabric SN8600B 32Gb SAN Director with Gen 6 (32Gb) capabilities to redefine application

HPE StoreFabric SAN Director Highlights

HPE SN8600B 32Gb SAN Director

They are purpose application demands. performance and capacity, greater throughput, and higher levels of resiliency.

HPE

cloud storage and highly virtualized environments. They are designed to increase business agility while providing non SN8000B direct

performance metro and

comprehensive diagnostics, monitoring, and automation

performance with simplified manageability and greater reliability

-built for Enterprise deployments to meet relentless growth and mission-critical SN8600B With Gen 6 (32Gb) Fibre Channel, delivers unmatched 32Gb

• Enhances operational stability, maximizes application performance, and increases business

agility with enterprise-class Gen 6 directors

• Consolidates infrastructure with 128 Gbps ICL connectivity for simpler, flatter, low-latency

fabrics

• Simplifies end-to-end management of large-scale environments by automating monitoring

and diagnostics

• Automatically detects degraded application or device performance through integrated

network sensors

• Extends replication over distance with a highly scalable extension solution for Fibre Channel,

IP, and FICON

• Simplifies configuration automation and enables integrated advanced services across the

Fabric with standard REST APIs

• Seamlessly integrates next-generation NVMe over Fabrics with Gen 6 Fibre Channel networks

without a disruptive rip and replace

• Mitigates risk with backward-compatibility while further protecting future investments with

Gen 7-ready support

are the right platform for large enterprise environments that require increased

The SN8600B SAN Director.

SN8000B 16Gb SAN Director

They provide a reliable, scalable, high-performance Fibre Channel switching foundation for private

-stop access to information and reducing infrastructure and administrative costs. The or family:

• Unleashes the full potential of private cloud storage with unmatched scalability, performance,

and reliability

• Enables simpler, flatter, low-latency chassis connectivity to reduce network complexity,

management, and costs

• Optimizes data center connectivity over distance with integrated high-

global connectivity

• Simplifies and centralizes end-to-end Storage Area Network (SAN) management with

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

Product Highlights

Page 6

• Maximizes performance for I/O- and bandwidth-intensive applications with more than seven

Performance

• SN8600B 32Gb 8-slot SAN Director

of Inter Chassis Link (ICL) bandwidth (freeing up to 128 16 Gb ports for server,

SAN scalability

The SN8600B 8-Slot Director scales up to 384 32 Gbps ports or a 512-port equivalent with 128 Gbps (4×32 Gbps) ICL ports (32 Gbps× 4 QSFP ports)

The SN8600B 4 (4×32 Gbps) ICL ports (32

The SN8000B 8

The SN8000B 4

Please see the following web sit

http://www.hp.com/go/sandesignguide

High-availability features

• Redundant, hot-swappable components

Advanced Fabric

•

times the performance of competitive offerings

•

- Up to 384 ports (equivalent to 512 with ICLs) at 32 Gb speed

- 16 Tbps aggregate chassis bandwidth

- 32 ICL ports, providing the equivalent of 128 32 Gbps ports (4.096 Tbps),

- 1.5 Tbps bandwidth per slot, providing line-rate performance for the HPE SN8600B

48-port blade

• SN8600B 32Gb 4-Slot SAN Director

- Up to 192 ports (equivalent to 256 with ICLs) at 32 Gb speed

- 8 Tbit/s aggregate chassis bandwidth

- 16 ICL ports, providing the equivalent of 64 32 Gbps ports (2.048 Tbps)

- 1.5 Tbps bandwidth per slot, providing line-rate performance for the HPE SN8600B

48-port blade

• SN8000B 16Gb 8-Slot SAN Director

- 512 ports operating simultaneously at full 16Gb speed (maximum)

- 10.2 Tbps of chassis bandwidth

- 2 Tbps

storage, and fabric connections)

• SN8000B 16Gb 4-Slot Director

- 256 ports operating simultaneously at full 16Gb speed (maximum)

- 5.1 Tbps of chassis bandwidth

- 1 Tbps of Inter Chassis Link (ICL) bandwidth (freeing up to 64 16 Gb ports for server,

storage, and fabric connections)

in a single switch domain.

-Slot Director scales up to 192 32 Gbps ports or a 256-port equivalent with 128 Gbps Gbps × 2 QSFP ports) in a single switch domain.

-Slot Director scales up to 512 16 Gbps ports in a single switch domain.

-Slot Director scales up to 256 16 Gbps ports in a single switch domain.

e for SAN configuration support information:

• Separate Control Processor (CP) and Core (CR) switching blades

• No active components on the backplane

• Redundant hot swappable power and cooling subsystems

• Enhanced data integrity on all data paths

• Fabric Shortest Path First (FSPF) rerouting around failed links

• Integration with SNMP managers

• Automatic Control Processor fail over

• Non-disruptive "hot" software code loads and activation

• Easy configuration, save and restore

Fabric Vision (Includes IO Insight Software for SN8600B Gen 6 Director)

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

Product Highlights

Page 7

Services

• ISL Trunking

NOTE:

unctionality and

SAO

no longer required at or

after this version.

Cabinet Support

HPE (22U, 36U, and 42U) 10000 G2 Series, the Intelligent Series racks and HPE (14U, 22U, 36U, 42U, and 47U) 11000 G2 Series racks.

NOTE: To order factory integration, add 0D1 after the part number on your sales order.

NOTE: A maximum of two B-series SAN Director switches currently are supported to ship configured

to order from the factory in a 42U, 10000 (10KG2) and Intelligent Series cabinet. However, 220V PDUs must be configured because 110V PDUs are not supported.

Software Components, Standard

Remote Switch

The Remote Switch fabric functions with the aid of a bridging device, or network bridge. The network bridge supports Fibre Channel physical interfaces, as well as secondary non physical interfaces.

Frame Filtering

An ASIC based capability in the 4 Gb, 8 Gb, and 16 Gb family of SAN switches that enables new applications and features. The switch has the ability to "view" the first 64 frame. At this time, Frame Filtering enables advanced capabilities such as Advanced Zoning.

Advanced Zoning

WWN Zoning and Access Control are included in the SN8600B and SN8000B SAN Directors hardware. Administrators can organize a physical fabric into logical groups and prevent unauthorized access by devices outside the Zone.

WebTools

WebTools is an intuitive and easy-to-use graphical interface that enables organizations to install and configure an configuration and basic management tasks by using a Java laptops, desktop PCs, or workstations from any location within the enterprise.

SAN Director Power Pack+ Software Bundle

The SAN Director Power Pack+ Software bundle includes:

• Fabric Vision

NOTE:

MAPS and Flow Vision respectively. Both are included in Fabric Vision

NOTE:

Base SAN Director (AR478A, AR478B, AR478C)

• Hardware Enforced Zoning

• Frame Filtering

• Web Tools

• Enhanced Group Management (EGM)

• End-to-End Performance Analysis

• Extended Fabrics

• Adaptive Networking

• SAN Network Advisor

• HPE Intelligent Infrastructure Analyzer Software (IIAS)

Fabric Watch is superseded by Fabric Vision in FOS 7.4. Adaptive Networking f

functionality became part of the base FOS in version 7.2 and licenses are

-Fibre Channel FCIP

-bytes of the Fibre Channel

SN8600B or SN8000B SAN Director. SAN administrators can perform the initial

-capable Web browser from standard

• Extended Fabric

• ISL Trunking

Starting with FOS 7.4.0a, Fabric Watch and Advanced Performance Monitor are replaced by

Optional software for the SN8000B 4-Slot (QK712A, QK712B, QK712C, QK712D) and DC04

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

Product Highlights

Page 8

Fabric Vision

Fabric Vision offers innovative diagnostic, monitoring and management capabilities to help accelerate new application deployments, address SAN problems before they impact operations and reduce operational costs. It Includes

built rules

Fabric Vision will be included by default in all Directors bundled with Power Pack+ (with FOS 7.2.0a and later). In all other cases, Fabric Vision can enabled on ways

Extended Fabric

Extends all of the scalability, reliability, and performance benefits of Fibre Channel Storage Area Networks (SANs) beyond the native 10 km distance specified by the Fibre Channel standard.

FICON Support

Optional FICON CUP license which enables host control of switches in mainframe environments. FICON Accelerator is an optional software license that increases the speed of FICON disk and tape read and writes, while maintaining the integrity of command and acknowledgement sequences.

ISL Trunking

For high performance enhanced ISL connectivity, this license logically groups up to eight E-ports to provide a high bandwidth trunk between two switches. Each The switch operating system views the trunk as a single, high bandwidth resource (up to 64 Gb Gb, or up to 128 Gb switches. Connections are load group.

Adaptive Networking

Adaptive Networking (AN) is a family of technologies which allow flexible control of traffic movement within the fabric which deliver application aware management of fabric resources. Applications may be used with multiple protocols and multiple classes of service. It includes the following features:

• Monitoring and Alerting Policy Suite (MAPS): A policy-based monitoring tool with pre-

and automation that simplifies fabric-wide threshold configuration and monitoring. In addition,

administrators can include IO Insight (Available on SN8600B) metrics in MAPS policies to understand the IO profile as well as to be notified of storage IO performance degradation.

• Configuration and Operational Monitoring Policy Automation Services Suite (COMPASS):

Simplifies deployment, safeguards consistency, and increases operational efficiencies of larger environments with automated switch and fabric configuration services. Administrators can configure a template or adopt an existing configuration to seamlessly deploy a configuration across the fabric.

• ClearLink® Diagnostics

cables, simplifying deployment and support of high-performance fabrics. ClearLink Diagnostic Port (D_Port) is an advanced capability of Fibre Channel platforms.

• Flow Vision: A comprehensive tool that enables administrators to identify, monitor, and analyze

specific application data flows in order to simplify troubleshooting, maximize performance, and

avoid congestion without using taps to ensure optimized performance.

• Health and performance dashboard: A single customizable screen displayed in HPE SAN

Network Advisor that contains all critical SAN information for convenient review and analysis

• Forward Error Correction (FEC):

ISLs, enhancing transmission reliability and performance.

HPE StoreFabric B-series Fibre Channel switches and Directors in any one of the following

Ensures optical and signal integrity for Fibre Channel optics and

Enables recovery from bit errors in device connections and

HPE StoreFabric B-series Fibre Channel switches and

• Application of the Fabric Vision LTU (FOS 7.2.0a and later)

• Application of the Power Pack+ LTU (FOS 7.2.0a and later)

• Upgrading existing Switch/Director loaded with Power Pack+ to FOS 7.2.0a or later

• Upgrading existing Switch/Director loaded with both Advanced Performance Monitor (APM)

and Fabric Watch (FW) licenses to FOS 7.2.0a or later

4 or 8-slot director needs its own license.

ps for 16Gb or up to 256 Gbps for 32Gb) when routing connections between

-balanced across the individual links, which comprise the logical trunk

ps for 8

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

Product Highlights

Page 9

• Ingress Rate

Allows the ingress bandwidth of a port to be throttled to a rate lower than negotiated with the SAN node. This could be very useful for enterprises offering stepped levels of service and enforcing SLAs.

• Quality of Service

Enables zones with high, medium, and low priorities within a fabric on a zone by zone basis. This can be very useful for prioritizing array replication over MANs and WANs over less critical traffic.

• Traffic Isolation

Defines paths through a fabric for some or all nodes. Failover allows a nonpreferred path to be used if the preferred fails. TIZs use failover by default but it can be disabled if traffic should stop if a preferred path fails. TIZ can be used to manually ma priority, and topology.

SAN Network Advisor Professional

HPE SAN Network Advisor Professional is a management application available at no-charge and comes with B

It is targeted for SMB customers that use FOS based SAN fabrics and require a management solution for smaller SANs based on a single fabric.

SMB customers that initially start off with SAN Network Advisor Professional and have a small SAN environment may over Professional+ or SAN Network Advisor complexity, and as they start to uptake more enterprise Routing, FCIP, etc.). A non to SAN Network Advisor

SAN Network Advisor Enterprise and Professional+

HPE SAN Network Advisor Enterprise and Professional+ are the enterprise-class products that support FOS. SAN Network Advisor Enterprise provides complete management including enterprise FCIP, adaptive networking etc

SAN Network Advisor Professional+ provides the same feature

set except for support for the

HPE switch ports, while ports. To accommodate growth, there is an upgrade available to SAN Network Advisor Enterprise from SAN Network Ad

HPE Smart SAN for 3PAR

HPE Smart SAN, optional software for HP 3PAR, makes end-to-end SAN configuration and management simple and reduces the probability of errors through automation. It is an application embedded in SAN componen and policies across the SAN. Smart SAN is supported with B Channel adapters (HBAs) and 3PAR storage. HPE Smart SAN for 3PA Zoning (TDPZ) feature enables customers to automate peer zoning, resulting in the creation of fewer zones and enables configuration of zones in minutes and not in hours. Through automation, it reduces the probability of err

http://www8.hp.com/us/en/products/storage

Limiting

(QoS)

Zones

p out traffic flows within a fabric based on application,

-series SAN Switches and:

• Allows management of two Fabric OS (FOS) fabrics (up to 300 switch ports and 1000 devices)

• Performs group switch management beyond the scope of Web Tools

• Does not offer management of the SN8600B 8-slot, SN8000B 8-Slot, DC SAN Backbone

Directors, or FICON.

time feel the need for an enterprise-class product (SAN Network Advisor

Enterprise) as their environments start to grow in size and

-class functionality (such as Fibre Channel

-disruptive upgrade path is available from SAN Network Advisor Professional

Professional+ or SAN Network Advisor Enterprise

SN8600B and SN8000B 8-Slot Director

-class features/environments such as FICON, Fibre Channel Routing, . while HPE SN8600B 8-slot, SN8000B 8-Slot Director and FICON.

SAN Network Advisor Enterprise delivers unprecedented scalability, up to 100 fabrics and 15,000

HPE SAN Network Advisor Professional+ scales to 36 SAN Fabrics and 2560 switch

visor Professional Plus.

ts (array, hosts and switches) that enables 3PAR arrays to orchestrate configuration, settings

-series Switches, HPE StoreFabric Fibre

ors and potential downtime. Additional information can be found here:

-software/product-

R through its Target Driven Peer

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

Product Highlights

Page 10

detail.html?oid=8295863#!tab=features

NOTE: NOTE: NO

3PAR StoreServ storage.

Optional Software:

Inter Chassis Link (ICL) License

Inter Chassis Links (ICLs) harness unused ports to connect the switching backplane of SAN Directors. The higher port density, and support for standard optical cables up to 100 meters QSFP+ network complexity and costs.

ICLs enable scalable core edge and active topologies reduce inter This maximizes overall port density in the lowest amount of rack space device ports for server and storage connectivity.

HPE SN8600B SAN Director

The SN8600B 8 (4.096 Tbps). The SN8600B 4 Gbps ports (2.048 Tbps). Gen 6 ICLs are backward including connectivity with 2 km QSFPs at Gen 5 speeds of 16 Gbps (4×16).

HPE SN8600B chassis connectivity leverages optical Inter-Chassis Links (ICLs), which provide 128 Gbps bandwidth through a QSFP link. These links can support up to 2 kil SN8600B Directors.

HPE SN8000B SAN Director

switching blade) that deliver 2.1 Tbps of bandwidth. This is equivalent to 128 16 Gbps ISLs. The SN8000B 4

rector has a total of 16 ICL ports (eight per core switching blade) that deliver 1 Tbps

of bandwidth. This is equivalent to 64 16 Gbps ISLs.

Base ICL support can connect up to four SN8000B Directors.

There is a common ICL POD (Ports on Demand) license be single ICL POD license will enable 16 QSFP ICLs or 1Tbps of bandwidth in both SN8000 8 Slot SAN Director. A subsequent ICL POD license will enable an additional 16 QSFP ICLs or 1Tbps in a SN8000B 8

NOTE:

optical cables are required for connectivity.

HPE SN8000B Enterprise Inter Chassis Link Licenses

Increased core-edge and active-active mesh topologies of up to nine (9) chassis can be supported with the addition of SN8000B 8 required). Director chassis using ICLs. For each SN8000B Director chassis, you can connect up to three SN8000B Director chassis via ICLs without this license. This license is required only on the SN8000B Director chassis that is connected to four or more SN8000B Director chassis. This license requirement does not

Supports B-series 32Gb, 16Gb and 8Gb FC switches with FOS 7.4.0a or later. A list of supported HPE FC Adapters can be found at https://h20272.www2.hp.com/spock/

TE: Supports 3PAR StoreServ storage with 3.2.2 or later with only 16Gb target ports on HPE

HPE StoreFabric SAN Directors offer the latest ICL technology which includes new optical ports,

. ICL support enables flatter, faster, and simpler fabrics that increase consolidation while reducing

-active mesh chassis topologies. These high-density chassis

-switch cabling by 75 percent and free up to 25% of ports for server and storage.

-slot Director supports 32 ICL ports, providing the equivalent of 128 32 Gbps ports

-slot Director supports 16 ICL ports, providing the equivalent of 64 32

The SN8000B 8-Slot Director has a total of 32 ICL ports (16 per core

-Slot Di

-Slot Director.

ICL licenses are required for each SN8600B and SN8000B SAN Director. ICL QSFPs and

-slot or 4-slot Enterprise Inter-Chassis Link licenses (FOS v7.0.1 or greater

The Enterprise ICL POD license allows you to connect four or more chassis to an SN8000B

-compatible and can connect to Gen 5 ICL ports,

ometers and connect up to 12

tween SN8000 8-Slot and 4-Slot chassis. A

or up to 2km with 2km

while freeing up front-facing

-Slot and 4-

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

Product Highlights

Page 11

depend upon the total number of SN8000B Director chassis that exist in a fabric, but only on the number of chassis connected directly to an SN8000B Director via ICLs. You must also have an ICL POD licen connection of more than four chassis using ICLs; it does not enable the ICL ports on a chassis. This applies to the SN8000B Directors only

HPE B-Series SAN Director FICON CUP Active License

Optional license feature provides Control Unit Port (CUP) in-band management function designed to allow mainframe applications to perform configuration, monitoring, management and statistics collection. These application Facility (DCM) and Resource Management Facility (RMF). Hardware zoning enhances separation with intermix operation.

NOTE: Supported for all B-series SAN Directors.

HPE DC SAN Director Switch Multiprotocol Ext Blade FICON Accelerator Upgrade

The FICON Accelerator software license increases the speed of FICON disk and tape read and writes, while maintaining the integrity of command and ackno

NOTE:

(C8R46A, C8R46B, C8R46C) for all B-series SAN Directors.

HPE B-series SAN Backbone Director Integrated Routing License

Integrated Routing is an optional license which provides native Fibre Channel Routing (FCR) on a perport basis, rather than limiting routing ports to those on a dedicated routing blade or switch. Just like traditional FCR, Integrated Routing uses EX_Ports to import/export selective device sharing while maintaining remote fabric isolation. Integrated Routing provides architecture flexibility to route on a port

NOTE:

product.

HPE MP Blade Performance Extension License

Optional software license to activate the high performance extension services. The HPE MPR Blade provides two type Logically connect devices in multiple SAN fabrics to share storage resources of distance

FCIP and FC Tunneling Service for SAN extension over distance: Either seamlessly and reliably extends HPE

Series SANs across MAN and WAN IP networks or dark fiber and xWDM Fibre Channel networks with high performance extension serv and FCIP extension services are mutually exclusive.

NOTE:

license for HPE Multi-Protocol Router blade (AG461B) for the DC SAN Directors.

10GbE and 10Gb FC Performance Upgrade

Optional software license to activate high performance for either 10GbE or 10Gb Fibre Channel connectivity.

10GbE Performance Upgrade LTU for MP Extension Extension Blade (C8R46A

Enables10 Gigabit Ethernet ports for the MP Extension Blade Extension Blade (

• (10) 1 GbE ports and (1) 10 GbE port or

se on each SN8000B Director to activate the ICL ports. The Enterprise ICL license only allows

License

s include System Automation for OS/390 (SA/390), Dynamic Channel Management

- enforced FICON and FCP port

wledgement sequences

Supported for the MP Extension Blade (AP865A, AP865B) and Enhanced MP Extension Blade

devices between fabrics, enabling

-by-port basis, enabling increased scalability and fault isolation.

Supported for all B-series SAN Directors. Separate LTU are available for each generation of

s of SAN Services: FC-FC Subnet Routing Service for SAN island consolidation:

-from any fabric regardless

-with the administration and fault isolation benefits of separately managed fabrics.

B-

ices, fully integrated with HPE CA solutions for EVA and XP. FC

HPE MP Blade Performance Extension LTU/E-LTU (T4427A/T4427AAE) is an optional

Blade (AP865A, AP865B) and Enhanced MP

, C8R46B, C8R46C).

(AP865A, AP865B) and Enhanced MP

C8R46A, C8R46B, C8R46C). Options for available Ethernet connectivity are:

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

Product Highlights

Page 12

• (2) 10 GbE ports

10Gb Performance Upgrade LTU for 16Gb Fibre Channel Blades

Enables customers to configure the first 8 ports 16Gb Fibre Channel blade at 10Gb Fibre Channel speed. This metro connectivity.

NOTE:

a mixture of 16Gb FC blades and the MP Extension Blade or Enhanced MP Extension Blade. The license is a The 10GbE Performance upgrade feature is available for the MP Extension Blade (AP865A, AP865B) and Enhanced MP Extension Blade (C8R46A The 10Gb Performance Upgrade feature is available for 16Gb Fibre Channel Blades for the SN8000B Directors. Requires 10Gb optics (QK726A and/or QK727A).

For SN8600B 32Gb SAN Director, 10GbE is support (Q0U85A, Q0U87A) and SN8600 to enable 10 Gbps support on SN8600B.

HPE MP Extension Blade Advanced Upgrade

HPE Infrastructure Analyzer Software (IIAS)

Optional software license for the MP Extension Blade and Enhanced MP Extension Blade which enables two advanced extension features: FCIP Trunking and Adaptive Rate Limiting.

FCIP Trunking:

FCIP Trunking feature allows multiple IP source and destination addr via multiple of the 1 GE and 10 GE interfaces to provide high bandwidth FCIP tunnel and failover resiliency. In addition, each FCIP circuit supports four QoS classes (Class-F, Hi, Medium and Low Priority), each as a TCP

Adaptive Rate Limiting:

An FCIP tunnel can be configured a minimum (guaranteed) committed rate as well as a maximum committed rate. FCIP tunnel will run at least the minimum rate. If additional bandwidth is needed, the committed rate will gr reached, or the throughput capabilities of the network are reached.

NOTE:

(C8R46A

The solution intended to manage the physical layer of a Storage Area Network (SAN) consisting of StoreFabric B

3PAR StoreServ Storage and monitor the physical layer across the SAN and to diagnose changes/even Pluggable (SFP) transceiver states/characteristics. It also presents the SAN topology, inventory and diagnostic information to the user in real SAN for root cause analysi enterprise SANs, where SAN management becomes cumbersome and tedious. center quality experience by predicting switch optical link failures before they are rep reduce the cost incurred due to application downtime.

in FOS 7.0 and 7.1, any port in FOS 7.2 or later of a

is required for DWDM and dark fiber

The optional 10GbE and 10Gb Fibre Channel performance upgrade features can be applied to

vailable on an individual SAN Director slot basis based on the particular blade installed.

, C8R46B, and C8R46C) for all B-series SAN Directors.

ed on the SN8600B SAN Extension Blade

B 32Gb 48-port blade (Q0U84A, Q0U86A). No license is required

ess pairs (defined as FCIP circuits)

Intelligent

Supported for the MP Extension Blade (AP865A, AP865B) and Enhanced MP Extension Blade

HPE Intelligent Infrastructure Analyzer Software (IIAS) v2 is an online monitoring and diagnostic

HPE StoreFabric FC HBAs. It uses industry-standard protocols (such as SNMP, SMI-S, Telnet) to

connection.

ow until the channel traffic demand is satisfied, maximum committed rate is

, C8R46B, C8R46C) for the SN8000B and DC SAN Directors

-series and/or H-series Fibre Channel switches and directors, HPE

-time. The product is used to detect potential failures in the

s and failure impact assessment and is therefore highly beneficial for

HPE

ts in Small Form-factor

It improves the total data

orted and aims to

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

HPE Support Services and Warranty Information

Page 13

Warranty

SN8600B 8-Slot SAN Director

(3-3-3) Hardware Warranty - Three-year NBD on-site warranty, 24x7, 4hour remote response, installation not included.

SN8600B 4-Slot SAN Director

(3-3-3) Hardware Warranty - Three-year NBD on-site warranty, 24x7, 4hour remote response, installation not included.

SN8000B 8-Slot SAN Director

(3-3-3) Hardware Warranty - Three-year NBD on-site warranty, 24x7, 4hour remote response, installati

SN8000B 4-Slot SAN Director

(3-3-3) Hardware Warranty - Three-year NBD on-site warranty, 24x7, 4hour remote response, installation not included.

NOTE: The hardware warranty covers firmware and embedded non-saleable software. Salea

Software Warranty physical defects for a period of ninety (90) days from delivery.

NOTE:

bility of Hewlett Packard Enterprise and its suppliers and your exclusive remedy for software that does not conform to this Limited Warranty shall be the repair or replacement of the defective media. This warranty and remedy are subject to your returning t country in which you obtained the software.

Protect your business beyond warranty with HPE Support Services

HPE Technology Services delivers confidence, reduces risk portfolio of Services for storage help customers reduce costs, optimize data, streamline storage management, and improve back and recovery. HPE Support Services enable you to choose the ri purchase your new storage solution, giving you full entitlement for the support for need for your IT and business.

Connect your devices:

Unlock all of the benefits of your technology invest to 77%

connecting, you will receive 24x7monitoring, pre Care Service and HPE Datacenter Care Service customers will also benefit from proactive activities to help prevent issues and increase optimization. All of these benefits are already av connected

1 2

Optimized Care

HPE Proactive Care Advanced*

This services helps achieve a higher return on your product investment with personalized support from a local assigned Account Support Manager who will share best practice advice and personalized recommendations designed to help improve availability and perf reduce unplanned downtime. for service offers c provides 24x7 coverage with four two independent software vendors unless you have your software support from Hewlett Packard Enterprise where

http://www.hpe.com/h20195/V2/GetDocument.aspx?docname=4AA5-3259ENW&cc=us&lc=en

on not included.

ble software carries its own warranty, see below.

- Hewlett Packard Enterprise warrants only that the software media will be free of

EXCLUSIVE REMEDY: The entire lia

he defective media during the warranty period to Hewlett Packard Enterprise in the

and helps customers realize agility and stability. Our integrated

ght service level, length of coverage and response time as you

reduction in down time, near 100%2 diagnostic accuracy and a single consolidated view of your environment. By

-failure alerts, automatic call logging, and automatic parts dispatch. HPE Proactive

ment by connecting your products to Hewlett Packard Enterprise. Achieve up

- IDC – HP CSC reports 2014 - 2015

to Hewlett Packard Enterprise support.

ailable to you with your server storage and networking products, securely

- 24x7 coverage, three year Support Service

pre-failure alerts, automatic call logging and parts dispatch. For business critical incidents, this

ritical event management to reduce mean time to resolution. This recommendation

-hour callback for supported software issues. Collaborative software management is included with

we own all cases from start through to resolution.

Leverage your system’s ability to connect to Hewlett Packard Enterprise

-hour response for hardware and collaborative support that offers

ormance to increase stability and

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

HPE Support Services and

Warranty Information

Page 14

Standard Care

HPE Proactive Care* with 24x7 coverage, three year Support Service

HPE Proactive Care gives customers an enhanced call experience plus helps pr maintains IT stability by utilizing personalized proactive reports with recommendations and advice when your products are proactive reporting and advice with is a problem. https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA3-8855ENW.pdf

Basic Care

HPE Foundation Care 24x7, three-year Support Service

HPE Foundation Care 24x7 gives you access to

, seven days a week for assistance on resolving issues. This service includes need based Hardware onsite response within four hours. Simplify your s to help resolve hardware or software problems.

http://www.hpe.com/h20195/V2/GetDocument.aspx

NOTE:

their devices to make the most of these services and receive all the deliverables.

Related Services

HPE SAN Deployment Service

Hewlett Packard Enterprise delivers complete design and implementation services for Fibre Channel, FCoE, FCIP, SAS, and iSCSI SAN connectivity components.

http://h20195.www2.hpe.com/V2/GetPDF.aspx/5981-8527EN.pdf

For more information

http://www.hp.com/services/storage

To learn more on representative or HPE Authorized Service Partners

eventing problems and

connected to Hewlett Packard Enterprise. This Service combines three years’

our 24x7 coverage, four hour hardware response time when there

Hewlett Packard Enterprise 24 hours a day

upport experience and make Hewlett Packard Enterprise your first call

?docname=4AA4-8876ENW&cc=us&lc=en

*HPE Proactive Care and HPE Proactive Care Advanced require that the customer connect

HPE Storage Services, please contact your Hewlett Packard Enterprise sales Hewlett Packard Enterprise Authorized Channel Partner

Care Pack Services are sold by Hewlett Packard Enterprise and Hewlett Packard Enterprise

• Services for customers purchasing from Hewlett Packard Enterprise or an enterprise reseller

are quoted using Hewlett Packard Enterprise order configuration tools.

• Customers purchasing from a commercial reseller can find HPE Support Services at

http://www.hp.com/go/lookuptool

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

Configuration Information

Page 15

Features

SN8000B 8-Slot SAN Director Power Pack+

SN8600B 8-Slot SAN Director Power Pack+

Targeted

Environment

Cloud Optimized Data Centers

Port Bandwidth

Up to 16Gbps

Up to 32 Gbps

Aggregate device

bandwidth

10.2Tbps

16.2 Tbps

OS Support

NOTE: Please Refer to SPOCK

Storage system

support

3PAR StoreServ, StoreVirtual 4000, P9000/XP, P6000/EVA, P2000/MSA

Ports

Up to 512 SFP

384 32 Gbps ports or a 512-port equivalent

SFP

B-series

Advanced

Trunking

Included with Power Pack

Adaptive

Networking

Included

Form factor

14U

Zoning Software

Yes (included)

Hot plug,

Yes

Hot plug fans

Yes

Features

SN8000B 4-Slot SAN Director and 4-Slot SAN

SN8600B 4-slot SAN Director Power Pack+

Targeted Environment

Cloud Optimized Data Centers

Port Bandwidth

Up to 16Gbps

Up to 32Gbps

Aggregate device

bandwidth

5.1 Tbps

8.1 Tbps

OS Support

NOTE: Please Refer to SPOCK

https://www.hpe.com/storage/spock

Storage system support

3PAR StoreServ, StoreVirtual 4000, P9000/XP, P6000/EVA, P2000/MSA

Ports

Up to 256 SFP

Up to 192 32 Gbps ports or a 256-port

SFP

B-series

B-Series

Advanced

Trunking

Included with Power Pack or Optional Upgrade

Included with Power Pack

Adaptive Networking

Included

Form factor

Zoning Software

Yes (included)

Yes (Included)

Hot plug, redundant

power supplies

Yes

Hot plug fans

Yes

redundant

power supplies

https://www.hpe.com/storage/spock

with 128 Gbps (32 Gbps×4 QSFP ports)

Director Power Pack+

equivalent with 16 ICL ports.

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

onfiguration Information

Page 16

Features

SN6000B 16 Gb FC Switch

SN6600B 32 Gb FC Switch and

SN6600B 32 Gb Bundled (SFP+)

Switch

Targeted Environment

Workgroups, Departments

Fibre Channel Port

Bandwidth

16 Gbps

32 Gbps

Aggregate device

bandwidth

384- 768 Gbps

2 Tbps

OS Support

NOTE: Please Refer to SPOCK

Storage system support

3PAR StoreServ, StoreVirtual 4000, P9000/XP, P6000/EVA, P2000/MSA

FC Ports

24 or 48 Enabled

48 Max

24 or 48 enabled

64 Max

24 or 48 Enabled

64 Max

SFP

B-series

B-series (16 Gb or 32 Gb)

B-series, 24 or 48 32 Gb SFP+

included in the box

Advanced

Trunking

Included with Power Pack+ or

Adaptive Networking

Included

Form factor

Zoning Software

Yes (Included)

Hot plug, redundant

power supplies

Yes

Hot plug fans

Yes (integrated with power

supply)

Yes (integrated with power supply)

Features

8/8 SAN Switch Base and 8/8

8/24 SAN Switch

SN3000B 16Gb FC

SN3600B 32Gb FC Switch

Power Pack+

Targeted

Environment

Workgroups, Departments

Workgroups,

Workgroups, Departments

Fibre Channel

Port Bandwidth

8Gbps

16Gbps

32Gbps

Aggregate device

bandwidth

64-192 Gbps

128-192 Gbps

192-384 Gbps

768 Gbps

OS Support

NOTE: Please Refer to SPOCK

https://www.hpe.com/storage/spock

Storage system

3PAR StoreServ, StoreVirtual 4000, P9000/XP, P6000/EVA, P2000/MSA

FC Ports

8 Enabled

16 Enabled

12 or 24 Enabled

8 or 24 Enabled

and SN6000B 16 Gb FC

Power Pack+

Optional Upgrade

SN6600B 32 Gb FC Power Pack+

Power Pack+ Bundled (SFP+) FC

https://www.hpe.com/storage/spock

Optional Upgrade

FC Switch and SN6600B 32 Gb

Optional Upgrade

support

SAN Switch

Base

Departments

Switch

and SN3600B 32Gb FC

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

onfiguration Information

Page 17

24 Max

SFP

B-series

Advanced

Optional Upgrade

Included with Power

Upgrade

Included with Power

Included with Power Pack+ or

Adaptive

Networking

Included

Form factor

Zoning Software

Yes (Included)

Hot plug,

Optional

Hot plug fans

Yes (integrated with

power supply)

Yes (integrated with power

supply)

Features

SN6500B 16Gb FC Switch and

SN6500B 16Gb FC Power Pack+

SN4000B Power Pack+ SAN

Extension Switch

1606 Extension SAN Switch

Targeted

Workgroups, Departments

Data Centers; long distance

Fabrics

Data Centers

Fibre Channel Port

16Gbps

8Gbps

Ethernet

N/A

1/10/40 Gbps Ethernet

1Gbps Ethernet

Aggregate device

bandwidth

768-1536 Gbps

OS Support

NOTE: Please Refer to SPOCK

https://www.hpe.com/storage/spock

Storage system

support

3PAR StoreServ, StoreVirtual 4000, P9000/XP, P6000/EVA, P2000/MSA

FC Ports

48 or 96 Enabled

96 Max

24 FC Ports Enabled

24 Max

4 or 16 Enabled

16 Max

Ethernet Ports

N/A

16 Enabled

2 or 6 Enabled

6 Max

SFP

B-series

Advanced

Trunking

Included with Power Pack+ or

Included

Included with Power Pack+ or

Adaptive

Networking

Included

Form factor

Zoning Software

Yes (Included)

Hot plug, redundant

power supplies

Yes

Hot plug fans

Yes

Features

Brocade 16Gb SAN Switch for HPE c-

Class BladeSystem

Brocade 8Gb SAN Switch for

HPE c-Class BladeSystem

Brocade 16Gb Fibre Channel SAN

Switch Module for HPE Synergy

Targeted

Environment

Enterprise, Datacenters, Workgroups,

Workgroups, Departments

Enterprise, Datacenters, Workgroups,

Port Bandwidth

16Gbps

8Gbps

16Gbps

Aggregate device

448 Gbps

192 Gbps

576 Gb/s (36 ports x 16 Gb/s)

Trunking

redundant

power supplies

Environment

Bandwidth

Pack+ or Optional

Pack+ Upgrade

replication, multiprotocol SAN

Optional Upgrade

bandwidth

Optional Upgrade

Departments

Optional Upgrade

Departments

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

onfiguration Information

Page 18

OS Support

NOTE: Please Refer to SPOCK

https://www.hpe.com/storage/spock

Storage system

Support

3PAR StoreServ, StoreVirtual 4000, P9000/XP, P6000/EVA, P2000/MSA

Ports

12 external /16 internal

4 or 8 external / 8 or 16 internal

8 SFP+ external, 4 QSFP external /12

SFP

B-series

Advanced

Trunking

Included with Power Pack+ or Optional

Included with Power Pack+ or

Included with Power Pack+ or Optional

Adaptive

Networking

Included

Form factor

Embedded

Zoning Software

Yes (Included)

Hot plug,

power

supplies

Yes, in BladeSystem Enclosure

Yes, in Synergy Frame

Hot plug fans

Yes, in BladeSystem Enclosure

Yes, in Synergy Frame

Step 1 – Base Configuration and Power Pack

Select one:

Model

Model Description

Part Number

HPE StoreFabric SN8600B 8-slot Power Pack+ Director Switch

Q0U63A

32Gb 512-port or 16Gb 512-port capable Fibre Channel Director, 2 control

HPE StoreFabric SN8600B 4-slot Power Pack+ Director Switch

Q0U83A

32Gb 512-port or 16Gb 512-port capable Fibre Channel Director, 2 control

HPE StoreFabric SN8000B 8-slot Power Pack+ SAN Backbone Director Switch

QK710D

16Gb 512-port or 8Gb 512-port capable Fibre Channel Director, 2 control

Enterprise Software 120 day software trial. Does not include Port blades or SFPs.

HPE StoreFabric SN8000B 4-slot Power Pack+ SAN Director Switch

QK711D

16Gb 256-port or 8Gb 256-port capable Fibre Channel Director, 2 control

internal

redundant

Upgrade

processors, 2 32 Gb core blades, 3 power supplies, 1 4Gb USB Device, rack rails, cable comb Zoning, Web tools, Fabric Vision Enhanced Group Management, Adaptive Networking, ISL Trunking, Extended Fabrics and SAN Network Advisor Enterprise Software 120 day software trial. Does not include Port blades or SFPs.

Optional Upgrade

Upgrade

processors, 2 32 Gb core blades, 2 power supplies, 1 4Gb USB Device, rack rails, cable comb Zoning, Web tools, Fabric Vision Enhanced Group Management, Adaptive Networking, ISL Trunking, Extended Fabrics, and SAN Network Advisor Enterprise Software 120 day software trial. Does not include Port blades or SFPs.

processors, 2 16Gb core blades, 2 power supplies, 1 4Gb USB Device, rack rails, cable comb Zoning, Web tools, Fabric Vision Enhanced Group Management, Adaptive Networking, Advanced Performance Monitor, Fabric Watch, ISL Trunking, Extended Fabrics, Server Application Optimization, and SAN Network Advisor

processors, 2 16Gb core blades, 2 power supplies, 1 4Gb USB Device, rack rails,

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

onfiguration Information

Page 19

cable comb Zoning, Web tools, Fabric Vision Enhanced Group Management,

HPE StoreFabric SN8000B 4-slot SAN Director Switch

QK712D

16Gb 256-port or 8Gb 256-port capable Fibre Channel Director, 2 control

software trial. Does not include Port blades or SFPs.

Step 2 – Additional Port Configurations

Model Description

Quantity

Part Number

HPE StoreFabric SN8600B 32Gb 48-port Fibre Channel Blade

Q0U84A

48-port 32Gb Director blade

NOTE:

Q0U83A)

Add the appropriate quantity of 48 port blades to meet requirements

HPE StoreFabric SN8600B 32Gb Short Wave 48-port SFP+ Integrated Fibre Channel Blade

Q0U86A

48-port 32Gb Director blade bundled with 32Gb SFP+

NOTE:

transceivers

NOTE:

Q0U83A)

Add the appropriate quantity of 48 port blades to meet requirements

HPE StoreFabric SN8600B 32Gb SAN Extension Blade

Q0U85A

NOTE: Only supported in SN8600B Directors (Q0U63A, Q0U83A)

HPE StoreFabric SN8600B 32Gb Short Wave 16-port SFP+ Integrated SAN Extension Blade

Q0U87A

NOTE: This blade ships with 16 integrated 32 Gb FC SW SFP+ transceivers

NOTE:

Q0U83A)

HP StoreFabric SN8000B 16Gb 32-port SFP Integrated Fibre Channel Blade

E7Y68B

NOTE: This blade ships with 32 integrated 16 Gb FC SW SFP transceivers

NOTE:

QK710B, QK710C, QK71

NOTE:

16Gb or 8Gb 32 supplies.

Add the appropriate quantity of 32 port blades to meet requirements

Adaptive Networking, Advanced Performance Monitor, Fabric Watch, ISL Trunking, Extended Fabrics, Server Application Optimization, SAN Network Advisor Professional Software and SAN Network Advisor Enterprise Software 120 day software trial. Does not include Port blades or SFPs.

processors, 2 16Gb core blades, 2 power supplies, 1 4Gb USB Device, rack rails, cable comb Zoning, Web tools, Enhanced Group Management, and SAN Network Advisor Professional, and SAN Network Advisor Enterprise Software 120 day

Only supported in SN8600B Directors (Q0U63A,

This blade ships with 48 integrated 32 Gb FC SW SFP+

Only supported in SN8600B Directors (Q0U63A,

Only supported in SN8000B Directors (QK710A,

QK710D, QK711A, QK711B,

1C,QK712D, QK712A, QK712B, QK712C and QK712D)

A fully populated SN8000B 8-slot Director Switch with

-port blades requires two 2000W power

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

onfiguration Information

Page 20

HP StoreFabric SN8000B 16Gb 48-port SFP Integrated Fibre Channel Blade

E7Y69B

NOTE: This blade ships with 48 integrated 16 Gb FC SW SFP transceivers

NOTE:

QK710B, QK710C, QK711D,

NOTE:

16Gb or 8Gb 32 supplies. The maximum number of 48 power supplies is seven (8th slot must be empty).

Add the appropriate quantity of 48 port blades to meet requirement

HPE StoreFabric SN8000B 16Gb 32-port Fibre Channel Blade

QK713D

32-port 16Gb/s Director Blade

NOTE:

QK710B, QK710C, QK711D, B

NOTE:

16Gb or 8Gb 32 supplies.

Add the appropriate quantity of 32 port blades to meet requirement

HPE StoreFabric SN8000B 16Gb 48-port Fibre Channel Blade

QK714D

48-port 16Gb/s Director Blade

NOTE:

QK710B, QK710C QK711D, B

NOTE:

16Gb or 8Gb 48 supplies. The maximum number of 48 with two po

HPE

NOTE:

QK710B, QK710C

QK711D

NOTE:

transceivers.

Add the appropriate quantity of 48 port blades to meet requirements

Add the appropriate quantity of 64-port blades to meet requirements

HP StoreFabric 8/16Gb SAN Director Enhanced Multiprotocol Extension Blade

C8R46C

22 enabled ports (12 8Gb Fibre Channel and 10 1 GbE) multiprotocol extension blade for SAN connectivity over FCIP. Additional 1 or 2 10GbE ports require upgrade (TA751A) which will impact the number of available 1 GbE ports.

NOTE:

Add maximum of

-series optical SFP transceivers for each port as listed below.

Only supported in SN8000B Directors (QK710A,

QK710D, QK711A, QK711B, QK711C,

QK712A, QK712B, QK712C and QK712DC)

A fully populated SN8000B 8-slot Director Switch with

-port blades requires two 2000W power

-port blades supported with two

Only supported in SN8000B Directors (QK710A,

QK710D, QK711A, QK711B, QK711C,

QK712A, QK712B, QK712C, and QK712DC). Requires

A fully populated SN8000B 8-slot Director Switch with

-port blades requires two 2000W power

Only supported in SN8000B Directors (QK710A,

QK710D, QK711A, QK711B, QK711C,

QK712A, QK712B, QK712C, and QK712DC). Requires

-series optical SFP transceivers for each port as listed below. A fully populated SN8000B 8-slot Director Switch with

-port blades requires four 2000W power

wer supplies is seven (8th slot must be empty).

StoreFabric SN8000B 16Gb 64-port Fibre Channel Blade

-port 16Gb/s Director Blade

Supported only in SN8000B Directors (QK710A,

, QK710D, QK711A, QK711B, QK711C,

QK712A, QK712B, QK712C, and QK712DC).

This blade ships with 16 integrated 4x16Gb SWL QSFP

Supports IP Security (´IPsec´) encryption over both

-port blades supported

E7Y80A

16Gb

10GbE performance

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

onfiguration Information

Page 21

10GbE ports.

NOTE:

series

optical SFP transceivers for each port as listed below.

HP StoreFabric DC04 SAN Director 16 Gb Core Switch Blades

C8R82C

2 Core Switch Blades to upgrade the DC04 SAN Director chassis to 16Gb capability. The new core switch blades allow the DC04 Direct 8Gb 64 port blade and all special application blades

NOTE:

the 16Gb Core switch blade is a disruptive process

NOTE:

placed for the C8R82

NOTE:

AR479B, AR479C, AR478A, AR478B, AR478C)

HP StoreFabric DC Backbone Director 16Gb Core Switch Blade

C8R83C

2 Core Switch Blades to upgrade the DC SAN Backbone Director chassis to 16Gb capability. The new core switch blades allow the DC SAN Backbone Director to support 16Gb port blades, 8Gb enhanced blades, 8Gb 64 port blade and all special application blades

NOTE: The process of upgrading the DC SAN Backbone Director

using the 16Gb Core switch blade is a disruptive process

NOTE:

placed for the C8R83

NOTE:

AK857B, AK857C, and AK857D).

Add Software:

HPE StoreFabric SN8600B 128-port Integrated Routing ELTU

Q0T79AAE

(Physical License

Q0T79A)

HPE StoreFabric SN8600B 8-slot Director Enterprise and Port

NOTE:

for ICL connectivity (Q0T80A, 0T80AAE) and also requires (Q0U89A) 4x32Gb QSFP or (H6Z76A) 4x16Gb QSFP and cables for ICL connectivity (QK729A and/or QK731A).

Q0T80AAE

(Physical License

Q0T80A)

HPE StoreFabric SN8600B 4-slot Director Enterprise and Port

NOTE:

for ICL connectivity (Q0T81A, Q0T81AAE) and also (Q0U91A) 4x32Gb QSFP or (Q0U90A) 4x16Gb QSFP and cables for ICL connectivity (QK729A and/or QK731A H6Z30A).

Q0T81AAE

Q0T81A)

HPE DC04 and SN8000B 4-slot SAN Director Power Pack+ ELTU

TA640AAE

(Physical License

Supported in all B-series SAN Directors. Requires B-

or to support 16Gb port blades, 8Gb enhanced blades,

The process of upgrading the DC04 SAN Director using

Two Core switch blades are shipped when an order is

C. Both blades are required for the upgrade

Only supported in DC04 SAN Directors (AR479A,

Two Core switch blades are shipped when an order is

C. Both blades are required for the upgrade

Only supported in DC SAN Backbone Director (AK857A,

-on-Demand Inter Chassis Link E-LTU

Each HPE SN8600B 8-slot Director requires this license

-on-Demand Inter Chassis Link E-LTU

Each HPE SN8600B 4-slot Director requires this license

(Physical license -

requires

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

onfiguration Information

Page 22

- TA640A)

Fabric Vision, ISL Trunking, and Extended Fabric

NOTE:

(QK711A, QK711B, QK711C, QK711D) and the DC04 SAN Director (AR478A, AR478B, AR478C)

NOTE:

Performance Monitor are replaced by MAPS and Flow Vision respectively. Both are included in Fabric Vision.

NOTE:

Optimization features are included by default in the switch firmware (FOS 7.2.0a or later) license

HPE 8/16Gb SAN Director Fabric Vision E-LTU

TC513AAE

(Physical License

- TC513A)

HPE SN8000B SAN Director Inter Chassis Link E-LTU

TC351AAE

(Physical License

- TC351A)

Inter Chassis Links (ICLs) harness unused ports to connect the switching backplane of one SN8000B Director with the switching backplane of a second SN8000B Director. Each ICL connection is the equivalent of 16 fixed speed 16 additional full duplex conne Tbps

There is a common ICL POD (Ports on Demand) license between SN8000 8 enable 16 QSFP ICLs or 1Tbps of bandwidth Slot and 4 enable an additional 16 QSFP ICLs or 1Tbps in a SN8000B 8 Director.

NOTE:

connectivity (TC351A/TC351AAE). Also req (H6Z76A) and cables for ICL connectivity (QK729A or QK731A or H6Z30A).

A maximum of four SN8000B SAN Directors may be connected using ICL connectivity

HPE SN8000B 8-slot Director Enterprise Inter Chassis Link ELTU

TC389AAE

cal License

- TC389A)

HPE SN8000B 4-slot Director Enterprise Inter Chassis Link ELTU

TC390AAE

(Physical License

- TC390A)

Inter Chassis Links (ICLs) harness unused ports to connect the switching backplane of one SN8000B Director with the sw backplane of a second SN8000B Director. Each ICL connection is

From five to a maximum of nine SN8000B SAN

Optional software for only the SN8000B 4-Slot Director

Starting with FOS 7.4.0a, Fabric Watch and Advanced

Adaptive Networking and Server Application

and do not require a separate

ction provides up to an additional 2

of bandwidth and does not consume usable ports.

-Slot and 4-Slot chassis. A single ICL POD license will

-Slot SAN Director. A subsequent ICL POD license will

Each SN8000B SAN Director requires a license for ICL

Gbps E_PORTs. This

in both SN8000B 8-

-Slot

uires QSFP

(Physi

itching

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

onfiguration Information

Page 23

the equivalent of 4 fixed speed 16Gbps E_PORTs. This additional full duplex connection provides up to an additional 2 bandwidth and does not consume usable ports.

Directors may be connected using ICL connectivity

Each 8-slot and 4-slot SN8000B chassis require its own specified license.

NOTE: Each SN8000B SAN Director requires a license for ICL connectivity (TC351A/TC351AAE) as Enterprise Licenses (TC389A/TC389AAE and TC390A/TC390AAE). Also requires QSFP (H6Z76A) and cables for ICL connectivity (QK729A or QK731A or H6Z30A).

HPE DC SAN Director 16 Inter-Chassis Link E-LTU

TA641AAE

License

- TA641A)

Inter Chassis Links (ICLs) harness unused ports to connect the switching backplane of one DC SAN Backbone with the switching backplane of a second DC SAN Backbone Director or DC04 SAN Director. Each ICL connection is the equivalent of 8 an additional 1 ports. ICL connections operate as hardware trunked ISLs.

NOTE:

connectivity. TA641A/TA641AAE is only supported on DC SAN Backbone Director. A cable kit is required for ICL copper cable connectivity.

A maximum of three DC SAN Directors may be connected using ICL connectivity

HPE DC SAN Director 8 Inter-Chassis Link E-LTU

TA642AAE

(Physical License

- TA642A)

With the 8 port ICL licenses you could connect up to 3 DC04 directors, or 3 DC SAN Backbone Directors' at half the available bandwidth, or any combination of above models totaling 3. Each ICL connection 8 fixed speed 8 connection provides an additional 512 does not consume usable ports. ICL connections operate as hardware trunked ISLs.

NOTE:

connectivity. TA642A/TA642AAE is supported on DC SAN Backbone Director or DC04 SAN Director. A cable kit is required for ICL copper cable connectivity.

A maximum of three DC SAN Directors may be connected using ICL connectivity

HPE SN8000B SAN Director Inter Chassis Link Cable

HP Premier Flex MPO/MPO Multi-mode OM4 8 fiber 10m Cable

QK729A

NOTE: Required for TC351A/TC351AAE. Also used for connectivity between QSFP ports on 2 16Gb FC Blades

One cable/ICL con supports 4 ports of connectivity between 2 chassis

HP Premier Flex MPO/MPO Multi-mode OM4 8 fiber 50m Cable

QK731A

NOTE: Required for TC351A/TC351AAE. Also used for

One cable/ICL

Gbps E_PORTs. This additional full duplex connection provides

Tbps of

a prerequisite to the

(Physical

16 fixed speed

Tbps of bandwidth and does not consume usable

Each DC SAN Director requires a license for ICL

Gbps E_PORTs. This additional full duplex

Each DC SAN Director requires a license for ICL

is the equivalent of

Gbps of bandwidth and

HPE SN8000B 64-port

nector

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

onfiguration Information

Page 24

connectivity between QSFP ports on 2 HPE SN8000B 64-port 16Gb FC Blades

connector supports 4 ports of connectivity between 2 chassis

HP Premier Flex MPO/MPO OM4 100m (12ft) Cable

H6Z30A

NOTE: Required for TC351A/TC351AAE. Also used for connectivity between QSFP ports on 2 16Gb FC Blades

One cable/ICL connector supports 4 ports of connectivity between 2 chassis

HPE 8/16Gb 8-Slot SAN Director Integrated Routing E-LTU

T5530AAE

T5530A)

HPE SN8000B 8-Slot and SAN Backbone Director Integrated Routing E-LTU

NOTE:

(QK710A, QK710B AK857B, AK857C).

HPE DC04 and SN8000B 4-slot SAN Director Integrated Routing E-LTU

TA643AAE

TA643A)

HPE SN8000B 4-Slot and DC04 SAN Director Switch Integrated Routing E-LTU

NOTE:

(QK711A, QK711B, QK711C, QK712 AR478B, AR478C).

HPE Multi Protocol Extension Blade 10GbE Performance Upgrade E-LTU

TA751AAE

TA751A)

Optional software license to activate high performance for either 10GbE or 10Gb Fibre Channel connec

10GbE Performance Upgrade LTU for MP Extension and Enhanced MP Extension Blade

Enables10 Gigabit Ethernet ports for the MP Extension Blade and Enhanced MP Extension blade. Options for available Ethernet connectivity are:

10Gb Performance Upgrade LTU for 16Gb Fibre Channel Blades

Enables customers to configure the first 8 ports FOS 7.2 and higher T

NOTE:

features can be applied to a mixture of 16Gb FC blades and the MP Extension Blade or Enhanced MP Extension Blade. The license is available on an individual

HPE SN8000B 64-port

(Physical License

Optional Integrated Routing License for the SN8000B 8-Slot Director

, QK710C) and the DC SAN Backbone Director (AK857A,

Optional Integrated Routing License for theSN8000B 4-Slot Director

QK711D, QK712A, QK712B, QK712C and

DC) and DC04 SAN Director (AR479A, AR479B, AR479C, AR478A,

tivity.

• (10) 1 GbE ports and (1) 10 GbE port or

• (2) 10 GbE ports

(Physical License

of a 16Gb Fibre Channel blade at 10Gb Fibre Channel speed.

his is required for DWDM and dark fiber metro connectivity.

The optional 10GbE and 10Gb Fibre Channel performance upgrade

in FOS 7.0 and 7.1 and any port in

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

onfiguration Information

Page 25

SAN Director slot basis based on the particular blade installed. The 10GbE Performance upgrade feature is available for the MP Extension Blade (AP865A, AP865B) and the Enhanced MP Extension Blade (C8R46A al 16Gb Fibre Channel Blades for the SN8000B Directors. Requires 10Gb optics (QK726A and/or QK727A).

HPE Multi-Protocol Extension Blade Advanced Upgrade E-LTU

TA752AAE

TA752A)

This optional license enables two advanced extension features: FCIP Trunking and Adaptive Rate Limiting.

NOTE:

Directors for the MP Extension Blade (AP865A, Extension Blade (C8R46A basis.

HPE Multi Protocol Extension Blade FICON CUP E-LTU

TA753AAE

TA753A)

Advanced Accelerator for FICON accelerates disk and tape read and write operations, maximizing FICON performance

NOTE:

SAN Backbone and DC04 SAN Director for the MP Extension Blade (AP865A, AP865B) and Enhanced MP Extension Blade (C8R individual SAN Director slot basis.

HPE Multi-Protocol Blade Performance Extension E-LTU

T4427AAE

T4427A)

Optional software license to activate the high performance extension services for either IP Directors Encryption Services License.

HPE ISL Trunking

HPE B-series SAN Director Trunking E-LTU

NOTE:

SAN Director.

J4V65AAE

(Physical License

B21)

HPE Extended Fabric

HPE B-series SAN Director Extended Fabric E-LTU

NOTE:

Director.

J4V64AAE

B21

HPE FICON

HPE B-series SAN Director FICON CUP E-LTU *

NOTE:

mainframe (SPOCK) for the latest information.

http://spock.corp.hp.com/

T4401AAE*

T4401A)

Management

HPE SAN Network Advisor Enterprise Software E-LTU

TC352BAE

(Physic

–

l B-series SAN Directors. The 10Gb Performance Upgrade feature is available for

, C8R46B, C8R46C) for

(Physical License

Optional Advanced Extension license is available on all B-series SAN

AP865B) and Enhanced MP

, C8R46B, C8R46C) on an individual SAN Director slot

(Physical License

The Optional FICON Accelerator license is available on the SN8000B, DC

46A, C8R46B, C8R46C) on an

or FC connectivity in the Multi Protocol Router Blade for DC backbone

. IP and FC extension services are mutually exclusive. It includes the

Optional ISL Trunking License for the SN8000B 4-Slot Director and DC04

Optional Extended Fabric License for the SN4000B 4-slot and DC04 SAN

(Physical License

325887-

(Physical License

325886-

Only supported in XP Storage array environments. Please refer to The HPE

connectivity stream at HPE "Single Point of Connectivity Knowledge"

(Physical License

al License

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

onfiguration Information

Page 26

TC352B)

HPE SAN Network Advisor Professional Plus Software E-LTU

TC353BAE

(Physical License –

TC353B)

HPE SAN Network Advisor Professional Plus Upgrade E-LTU

TC354BAE

(Physical License –

TC354B)

NOTE: HPE B-series software licenses are available through the Electronic Delivery (E equivalent to the corresponding physical licenses. The E with AE) is second.

NOTE:

customers. Instead, customers will be able to access and download the software from

Step 3 – Additional Options

HPE StoreFabric SN8600B Director Optional Power Supply

NOTE: Additional power supply for the HPE SN8600B 8-slot Director.

Q0U92A

Additional Power Supply

HP DC SAN Backbone Director Power Supply

NOTE: NOTE:

with one PDU cord and one power cord.

AK863C

Fibre Channel Optical Transceivers

HPE B-series 32Gb SFP+ SW 1-pack XCVR

P9H32A

HPE B-series 32Gb SFP+ LW 1-pack XCVR

P9H29A

HPE StoreFabric SN8600B 8-slot Director 4x32Gb 16-pack Short Wave ICL QSFP Transceiver

NOTE:

SN8600B 8 License (Q0T80A, Q0T80AAE).

Q0U89A

HPE StoreFabric SN8600B 4-slot Director 4x16Gb 8-pack Short Wave ICL QSFP Transceiver

NOTE:

SN8600B 4 License (Q0T81A, Q0T81AAE).

Q0U90A

HPE StoreFabric SN8600B 4-slot Director 4x32Gb 8-pack Short Wave ICL QSFP Transceiver

NOTE:

SN8600B 4 License (Q0T81A, Q0T81AAE).

Q0U91A

HP B-series 16Gb SFP+ Short Wave Transceiver

QK724A

HP B-series 16Gb LW 25km FC SFP 1-pack Transceiver

H6Z29A

HPE B-series 1GbE LX SFP Transceiver

E7Y74A

-Delivery) mechanism. The E-Delivery software licenses are functionally

-Delivery version (ending

the suggested option and is listed first and the physical version is

HPE SAN Network Advisor software will no longer be shipped as a DVD to

The HPE Product Download web site.

Add in pairs; maximum 4 supported in DC SAN Backbone chassis. Optional Power Supply for the B-series SAN Directors. The power supply is shipped

Only supported in SN8600B Directors (Q0U63A, Q0U83A). When connecting two

-slot Directors via ICL, requires the SN8600B 8-slot Director Inter Chassis Link

Only supported in SN8600B Directors (Q0U63A, Q0U83A). When connecting two

-slot Directors via ICL, requires the SN8600B 4-slot Director Inter Chassis Link

Only supported in SN8600B Directors (Q0U63A, Q0U83A). When connecting two

-slot Directors via ICL, requires the SN8600B 4-slot Director Inter Chassis Link

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

onfiguration Information

Page 27

HPE B-series 40GbE LR QSFP+ Transceiver

E7Y75A

HPE B-series 40GbE SR QSFP+ Transceiver

E7Y76A

HPE SN8600B 32Gb SAN Director supports the following HPE Complete SmartOptics 16Gb Tranceivers

16G

NOTE: For more information regarding Smartoptics SKUs/Accessories/Cables and ordering

rules please refer HPE Complete Smartoptics Quickspecs.

http

HP 8Gb Shortwave B

NOTE:

Wave Length SFP qualified and supporte QK713B, QK713C, QK713D, QK714A, QK714B, QK714C and QK714D).

AJ716B

HP B

QK725A

HP 8Gb Long Wave B-series 10km Fibre Channel 1 Pack SFP+ Transceiver

AJ717A

HP B-series 8Gb Extended Long Wave 25km Fibre Channel SFP+ Transceiver 1 Pack

AW538A

HP 4Gb Short Wave B-series Fibre Channel 1 Pack SFP Transceiver

NOTE:

QK713B, QK713C, QK713D, QK714A, QK714B, QK714C, and QK714D).

AJ715A

HP 4Gb Long Wave B

NOTE:

QK713B, QK713C, QK713D, QK714A, QK714B, QK714C, and QK714D).

AN211A

HP B-series 10Gb SFP+ Short Range Transceiver

QK726A

HP B-series 10Gb SFP+ Long Range Transceiver

QK727A

HP BladeSystem c-Class 10Gb XFP SR 850nm Transceiver

443756-B21

HP B-series 4x16Gb SW SFP+ 16Pk XCVR

NOTE:

Chassis Link License (TC351A/TC351AAE). Directors via ICL, requires the SN8600B 8 (Q0T80A, Q0T80AAE). Supports distances up to 100m. S

H6Z76A

HP StoreFabric B-series 4x16Gb Fibre Channel 2Km Inter-chassis Link QSFP Transceiver

NOTE:

distances up to 2Km. Ships in 1 unit pack.

NOTE:

Contact your information on recommended cable suppliers.

K2Q88A

Converged Enhanced Ethernet

HP B-series 10GbE Short Wave SFP+ Transceiver

AP823A

HP B-series 10GbE Long Wave SFP+ Transceiver

AP824A

FC embedded DWDM Solution

s://www.hpe.com/h20195/v2/Getdocument.aspx?docname=c05205226

Qualified and supported on 8Gb Fibre Channel blades; This is the ONLY 8Gb Short

-series 16Gb SFP+ Long Wave 10km Transceiver

–

-series Fibre Channel 1 Pack SFP+ Transceiver

d on 16Gb Fibre Channel blades (QK713A,

NOT supported and qualified on 32Gb and 16Gb Fibre Channel blades (QK713A,

-series 30km Fibre Channel SFP Transceiver 1 Pack

NOT supported and qualified on 32Gb and 16Gb Fibre Channel blades (QK713A,

When connecting two SN8000B Directors via ICL, requires the SN8000B Inter

When connecting two SN8600B 8-slot

-slot Director Inter Chassis Link License

hips in a pack of 16 units

Required for SN8000B Inter Chassis Link License (TC351A/TC351AAE). Supports

Requires MTP to MTP 12-fiber Parallel Single Mode Cable up to 2Km in length.

Hewlett Packard Enterprise sales representative or channel partner for more

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

onfiguration Information

Page 28

(CEE) Optical Transceivers

Transceiver Performance

Distance

HPE Standard OM3 Cable

HPE PremierFlex OM3+ Cable

HPE PremierFlex OM4 Cable

32Gb performance

70 meters

100 meters

16Gb performance:

100 meters

125 meters

8Gb performance:

150 meters

190 meters

4Gb performance:

380 meters

400 meters

Copper Transceiver

HP B-series 1Gb Ethernet Copper SFP Transceiver 1 Pack

NOTE:

Protocol Extension Blade

AW537A

USB Device

HPE B-series 4G USB Drive

N9Y63A

Optical cables

HPE PremierFlex OM4+ Fiber Optic Cables

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable

QK732A

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable

QK733A

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable

QK734A

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable

QK735A

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable

QK736A

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable

QK737A

HPE Premier Flex OM4 QSFP Fiber Optic Cables

HPE Premier Flex MPO/MPO OM4 12f 1m Cable

Q1H63A

HPE Premier Flex MPO/MPO OM4 12f 2m Cable

Q1H64A

HPE Premier Flex MPO/MPO OM4 12f 5m Cable

Q1H65A

HPE Premier Flex MPO/MPO OM4 12f 10m Cable

QK729A

HPE Premier Flex MPO/MPO OM4 12f 15m Cable

Q1H66A

HPE Premier Flex MPO/MPO OM4 12f 30m Cable

Q1H67A

HPE Premier Flex MPO/MPO OM4 12f 50m Cable

QK731A

HPE Premier Flex MPO/MPO OM4 12f 100m Cable

H6Z30A

HPE OM3 LC-LC Optical Cables

HP LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable

AJ833A

HP LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable

AJ834A

HP LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable

AJ835A

HP LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable

AJ836A

HP LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable

AJ837A

HP LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable

AJ838A

HP LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable

AJ839A

High Density Cables

QSFP to 4xLC Breakout Cables

HPE Premier Flex MPO to 4xLC 5m Cable

K2Q46A

- Maximum

Supported on the HPE Multi Protocol Extension Blade and HPE Enhanced Multi

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

onfiguration Information

Page 29

HPE Premier Flex MPO to 4xLC 15m Cable

K2Q47A

HPE Premier Flex MPO to 4xLC 30m Cable

Q1H68A

HPE Premier Flex MPO to 4xLC 50m Cable

Q1H69A

NOTE: Supported on the HPE SN8000B 64-Port 16Gb FC Blades

NOTE: Due to the high number of connections required for the 64-port blade, a unique

set of cables and couplers must be used to enable the High Density 64 the DC SAN Directors. There are two methods available for cabling the 64 The first method is directly from the 64 mSFP/LC Cable with an LC/LC Multi-mode Coupler as show in example A in the diagram below. The second is through the use of a patch panel as shown in example B. A list of recommended patch panels, distributors such as Anixter, Graybar, CSC, and AccuTech, is provided below:

For Inter Switch Links (ISL) between two along with a LC/LC Multi-mode Coupler as shown in example C can be used.

LC-MiniSFP Cables:

HP B-series 1.5 Meter Multi-mode OM3 Mini SFP/LC FC Cable

BK784A

HP B-series 2.5 Meter Multi-mode OM3 Mini SFP/LC FC Cable

BK785A

HP B-series 5 Meter Multi-mode OM3 Mini SFP/LC FC Cable

BK786A

HP LC/LC Multi-mode Optical Cable Coupling Connector 8 Pack

BK787A

Optional Software

HPE Intelligent Infrastructure Analyzer Software v2 E-LTU

The

Intelligent Infrastructure Analyzer Software (IIAS) v2 is an online monitoring and diagnostic solution intended to manage the physical layer of a (SAN) consisting of directors,

TC472AAE

TC472A)

Recommended Patch Panels for the High Density Cables

-port blade for

-port blade:

-port blade to a standard LC-LC cable using an

manufactured by CommScope and available through

8Gb 64-port blades, two mSFP/LC FC Cables

HPE

HPE StoreFabric B-series and/or H-series Fibre Channel switches and

HPE 3PAR StoreServ Storage and HPE StoreFabric Fibre Channel HBAs.

(Physical License

Storage Area Network

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

onfiguration Information

Page 30

Type

LC-LC

MPO-MPO (MTP-MTP)

CommScope part number

760139683

760136473

CommScope orderable model

3603D-1U-UP UHD w(3) 3603P-48LC-

3603D-1U-UP UHD w(3) 3603D-1U-

72MPO

Rack unit

Number of ports

72 MPO or 432 LC ports (cables)

Lead time

4 weeks or sooner

NOTE: Up to 1024 DC SAN Backbone Director ports are supported per 42U rack using Patch Panels. The last 16 ports require couplers when using LC-LC Patch Panels.

Trunk Cables for mSFP Connection

Corning

Part Number

Amphenol

Part Number

mSFP LC - MTP-female, 12

50/125

PN varies based on length

(XXX = length)

PN varies based on length

(XXXX = length)

Type

mSFP to MTP

Description

fiber, 12" breakout, OM3,

Length

Need to specify length

when ordering

H93S5TE9-BMU-XXXM

943-99867-1XXXX

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

Technical Specifications

Page 31

Fibre Channel ports

48-port 32Gb Fibre Channel port blade option for SN8600B SAN Director. 32 port, 48 port and 64 port 16Gb Fibre Channel port blade options for the SN8000B SAN Directors.

Control processor

Redundant (active/standby) hot swappable control processor modules

Scalability

Full fabric architecture:

http://h18006.www1.hp.com/products/storageworks/san/documentation.html

Performance

SN8600B

Fibre Channel: 4 Gbps line speed, full duplex 8 Gbps line speed, full duplex 10 Gbps line speed, full duplex 16 Gbps line speed, full duplex 32 Gbps line speed, full duplex Autosensing of 4, 8, 16, and 32 Gbps port

8, 16, and 32 Gbps port speeds. 10 Gbps port speeds with dedicated SFPs

SN8000B

Fibre Channel: 4.25 Gbps line speed, full duplex; 8.5 Gbps line speed, full duplex; 10.53 Gbps line speed, full duple and optionally programmable to fixed port speed

ISL Trunking

SN8600B - Frame-based trunking with up to eight 32 Gbps ports per ISL trunk; up to 256 Gbps per ISL

trunk. Exchange

SN8000B - Up to eight 16 Gbps ports per ISL trunk; up to 128 Gbps per ISL trunk

Chassis Bandwidth

SN8600B 8-Slot SAN Director: 12.2 Tbps per chassis (384 ports×32 Gbps) data rate + 4.096 Tbps ICL

bandwidth (32×128 Gbps)

SN8600B 4

bandwidth (16×128 Gbps)

SN8000B 8

(

SN8000B 4

(256 ports × 16 Gbps data rate + 1.024 Tbps ICL bandwidth)

Slot bandwidth

SN8600B - 1,536 Gbps (line rate)

SN8000B

Local Switching bandwi

SN8600B

1536 Gbps for 32/48: 48 ports x 32Gbps (data rate)

SN8000B

512 Gbps for 16/32: 32 ports × 16 Gbps (data rate)

speeds depending on SFPs used. Speed matching between 4,

x; 14.025 Gbps line speed, full duplex; auto-sensing of 4, 8, and 16 Gbps port speeds; 10 Gbps

-based load balancing across ISLs with DPS included in FOS

-Slot SAN Director: 6.1 Tbps per chassis (192 ports×32 Gbps) data rate + 2.048 Tbps ICL

-Slot SAN Director: 10.2 Tbps per chassis

512 ports × 16 Gbps data rate + 2.048 Tbps ICL bandwidth)

-Slot SAN Director: 5.1 Tbps per chassis

- 1024 Gbps (data rate)

dth

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

Technical Specific

ations

768 Gbps for 16/48: 48 ports × 16 Gbps (data rate) 1,024 Gbps for 16/64: 64 ports x 16 Gbps (data rate)

Switch latency

SN8600B

HPE S local switching and 2.7

HPE SAN Extension blade (32Gb), Fibre Channel to Fibre Channel: <900ns (including FE any

SN8000B

Locally switched port latency is 800 ns; blade less than 6 default)

Maximum frame size

2112-byte payload

Frame buffers

SN8600B - 15,000 per switching ASIC

SN8000B -

48-port blades, dynamically allocated

Classes of service

Class 2, Class 3, Class F (inter-switch frames)

Fibre Channel Port Types

SN8600B 32Gb:

HPE SN8600B 32Gb 48 HPE 8600B 32Gb SAN Extension Blade: F_Port, E_Port, a

NOTE:

SN8000B

D_Port (Diagnostic Port), E_Port, EX_Port, F_Port, M_Port (Mirror Port); self type (U_Port); optional port type control

Data traffic types

Fabric Switches supporting unicast, multicast (255 groups), and broadcast

USB

SN8600B:

One USB port per control processor for firmware download, support save, and configuration upload or downlo

SN8000B: 1 USB port for firmware download and for Supportsave

SN8000B Media types SN8600B

HPE SN8600B 32Gb 48 SWL/LWL and SFP+ at 16 Gbps SWL/LWL/ELWL, 10 Gbps SWL/LWL SF

HPE SWL/LWL; SFP+ at 16 Gbps SWL/LWL/ELWL; SFP at 10 Gbps FC SWL/LWL and Ethernet SFP+ at 1 GbE copper, 1 GbE 1000BASE 80 km, and QSFP at 40 GbE SR4/LR4/ER4.

Core Routing (CR) blades support hot-pluggable B-series Fibre Channel QSFP at 4×32 Gbps SWL, 4×16

N8600B 48-port blade at Gen 6 32 Gbps speeds: <900 ns (including FEC); any-port-to-any-port

μs blade to blade at 32 Gbps, cut-through routing

C) and 2.7 μs

-port-to-any-port at 32 Gbps, cut-through routing

-to-blade latency is 2.4 µsec; encryption/compression is

µsec per node; Forward Error Correction (FEC) adds 400 ns between E_Ports (enabled by

8192 per 16-port group on 32 and 64 port blades and up to 8192 per 24-port group on

-port FC blade: F_Port, E_Port, EX_Port, M_Port, SIM, and D_Port nd EX_Port on FC, and VE_Port on GbE

Self-discovery is based on switch type (U_Port) with an optional port-type control.

16Gb:

32Gb

SN8600B 32Gb SAN Extension Blade: Supports hot-pluggable Fibre Channel SFP28 at 32 Gbps

-port FC blade: Supports hot-pluggable Fibre Channel SFP+ at 32 Gbps

-SX/LX/CWDM, SFP+ at 10 GbE SR/LR; SFP+ at 10 GbE tunable DWDM

Page

-discovery based on switch

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

Technical Specific

ations

Gbps SWL and 4×16 Gbps 2 km QSFP for ICL connections

SN8000B

: 16 Gbps: 16/64 FC blade requires B 1x12 ribbon cable connector,

pluggable SFP+, LC connector; 16 Gbps SWL conne SFP+, LC connector; 8 Gbps SWL, LWL, ELWL pluggable QSFP, MTP connector; 4×16 Gbps SWL

Fibre Channel distance subject to fiber-optic cable and port speed

Fabric services

SN8600B:

Adaptive Networking (Traffic Isolation, QoS); BB credit recovery; Advanced Zoning (default zoning, port/WWN zoning, peer zoning, target Extended Fabrics; FDMI; FICON CUP; Flow Vision; Frame Redirection; FSPF; IP Management Server; Monitoring and Alerting Policy Suite (MAPS); N_Port Trunking; NPIV; NTP v3; Port Fencing; Registered State Change Notification Server

SN8000B: Fabric Vision technology; Monitoring and Alerting Policy Suite (MAPS); Flow Vision; Performance Monitoring (APM) (including Top Talkers for E_Ports, F_Ports, and Fabric mode); A Networking (Ingress Rate Limiting, Traffic Isolation, QoS); Bottleneck Detection; Advanced Zoning (default zoning, port/WWN zoning, broadcast zoning); Dynamic Fabric Provisioning (DFP); Dynamic Path Selection (DPS); Extended Fabrics; Enhanced BB cr Frame and Alerting Policy Suite (MAPS); (RSC (SNS); Virtual Fabrics (Logical Switch, Logical Fabric)

Extension

SN8600B:

Supports DWDM, CWDM, and FC and encryption (AES data compression, Fast Write, read/write Tape Pipelining, QoS

SN8000B: Supports DWDM, CWDM, and FC (AES read/write Tape Pipelining, QoS

FICON

FICON cascading; support for lossless DLS; FICON CUP; Advanced Accelerator for FICON (FICON Global Mirror and XRC emulation and read/write Tape Pipelining).

High availability

SN8600B SAN Director

Architecture

Non-blocking shared memory; passive backplane; redundant active/passive control processor; redundant active/active core switchin WWN cards

Chassis Power

HPE SN8600B 8-slot SAN Director:

Four power supplies required for AC Low Line (100 VAC to 120 VAC) Two power supplies required for AC High Line (200 VAC to 240 VAC). Device ships with three PSUs or empty (3 for

system power, but four must be installed to provide power efficiency and 2+2

16Gb

-series hot-pluggable QSFP connector; 4x16Gb SWL QSFP, MPO

16 Gbps: 16/32 and 16/48 FC blades require B-series hot-

10 Gbps: 16/32 and 16/48 require B-series hot-pluggable SFP+, LC

ctor; 10 Gbps SWL, LWL 8 Gbps:, Enhanced MP Extension Blade require B-series hot-pluggable

ICL QSFP: B-series Core Blades require B-series hot-

-driven zoning, broadcast zoning); Dynamic Path Selection (DPS); oFC; ISL Trunking;

(RSCN); Reliable Commit Service (RCS); Simple Name

Advanced

daptive

edit recovery; Fabric Watch; FDMI; Frame Redirection;

-based Trunking; FSPF; Integrated Routing; IPoFC; ISL Trunking; Management Server; Monitoring NPIV; NTP v3; Port Fencing; Registered State Change Notification

N); Reliable Commit Service (RCS); Server Application Optimization (SAO); Simple Name Server

-SONET devices; Fibre Channel, in-flight compression (Brocade LZO)

-GCM-256); BB credit recovery; FCIP, IP Extension, Adaptive Rate Limiting (ARL),

-SONET devices; Fibre Channel, in-flight compression and encryption

-GCM-256) BB credit recovery; FCIP, Adaptive Rate Limiting (ARL), data compression, Fast Write,

Page

g blades; redundant

2+1 redundancy). Two provide

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

Technical Specific

ations

redundancy.

HPE SN8600 4

Two power supplies required for AC Low Line (100 VAC to 120 VAC). One power supply required for AC High The device ships with two power supplies. One provides system power, but

both must be installed to provide power efficiency and 1+1 redundancy.

Cooling

HPE SN8600B 8-slot SAN Director:

Requires three fan tray assemblies. A fail any fan tray.

Each assembly contains two fans for a total of six. The system requires five of six functioning fans for operation in the SN8600B 8 tray assembly can be hot the event of a failure.

HPE SN8600 4

Requires two fan tray assemblies. A failure condition is one failed fan from any fan tray.

Each assembly contains two fans for a total of four. The system requires three of four assembly can be hot event of a failure.

High availability

Airflow

Non-port-side intake to port-side exhaust.

Solution availability

Designed to provide 99.999 percent uptime capabilities; hot-pluggable redundant power supplies, fans, WWN cards, processors, core

SN8000B SAN Director

Control Processor

Redundant (active/standby) control processor modules; automatic failover; non processor to store two software images

Modules

Hot swappable

Backplane

Fully passive

Input power

Dual or quad AC inputs

Chassis power

Dual AC-DC power supply modules, N+2 redundant, SN8000B 8-Slot and DC SAN Backbone supports two additional power modules

Cooling

DC SAN Backbone Director: Three blower assembly modules (two operational required)

DC04 SAN Director: Two blower assembly modules (one required for operation)

Management

SN8600B:

HTTP, SNMP v1/v3 (FE MIB, FC Management MIB), SSH; Auditing, Syslog; Advanced Web Tools, HPE SAN Network Advisor SAN Enterprise or SAN Professional Plus; Command Line Interface (CLI); SMI compliant; RESTful API; trial licenses for add

SN8000B:

HTTP, SNMP v1/v3 (FE MIB, FC Management MIB), SSH; Auditing, Syslog; Web Tools, SAN Network Advisor SAN Enterprise (SN8000B Professional/Professional Plus (SN8000B 4 compliant; Administrative Domains; trial licenses for add-on capabilities

-slot SAN Director:

Line (200 VAC to 240 VAC).

ure condition is one failed fan from

-slot Director. One fan

-swapped and should be replaced immediately in

-slot SAN Director:

functioning fans for operation in the SN8600 4slot Director. One fan

-swapped and should be replaced immediately in the

-disruptive software upgrades; dual-flash memory on each control

8-slot SAN Director) or SAN Network Advisor SAN

-on capabilities

-Slot SAN Director); Command Line Interface (CLI); SMI-S

Page

-S

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

Technical Specific

ations

Security

SN8600B:

DH HTTPS, IPsec, IP filt Access Control (RBAC), Secure Copy (SCP), Secure RPC, SFTP, SSH v2, SSL, Switch Binding, TACACS+, Trusted Switch

SN8000B:

AES authentication; FIPS 140 RADIUS, User v2, SSL, Switch Binding, Trusted Switch

Management access

SN8600B:

10/100/1000 Ethernet (RJ and one USB per control processor module; DHCP/DHCPv6; call SAN Network A

SN8000B:

10/100/1000 Ethernet (RJ Control Processor blade

Diagnostics

SN8600B:

IO Insight for IO monitoring; ClearLink optics and cable diagnostics, including electrical/ link traffic/latency/distance; built including environmental monitoring, FCping and Pathinfo (FC traceroute), flow mirroring, frame viewer, non

tics health monitoring, power monitoring, RAStrace logging, and Rolling

Reboot Detection (RRD)

SN8000B:

D_Port offline diagnostics, including electrical/optical loopback, link traffic/latency/distance; POST and embedded online/offline diagnostics, includi traceroute), frame viewer, non monitoring, power monitoring (16 Gbps blades (RRD)

Mechanical specifications

SN8000B Ports per rack

Up to 1536 ports per 42U rack

Up to 1024 DC SAN Backbone Director ports per 42U rack using Patch Panels.

NOTE: The last 16 ports require couplers when using LC-LC Patch Panels.

Enclosure

SN8600B:

HPE SN8600B 8

chassis; 27 in. to 31 in. and 22 in. rail kits for the four

mount kit

for the two

HPE SN8600B 4slot SAN Director 8

chassis; 27 in. mount kits for the four

SN8000B:

Rear panel exhaust shelf

-CHAP (between switches and end devices), FCAP switch authentication, FIPS 140-2 L2-compliant, ering, LDAP with IPv6, OpenLDAP, Port Binding, RADIUS, user-defined Role-Based

-GCM-256 encryption on ISLs; DH-CHAP (between switches and end devices), FCAP switch

-2 L2-compliant, HTTPS, IPsec, IP filtering, LDAP with IPv6, Port Binding,

-defined Role-Based Access Control (RBAC), Secure Copy (SCP), Secure RPC, SFTP, SSH

-45) per control processor, in-band over Fibre Channel; serial port (RJ-45)

-home integration enabled through HPE

dvisor.

-45), in-band over Fibre Channel; serial ports (RJ-45) and one USB per

-in flow generator; POST and embedded online/offline diagnostics,

-disruptive daemon restart, op

ng environmental monitoring, FCping and Pathinfo (FC

-disruptive daemon restart port mirroring (SPAN port), optics health

-only), RAStrace logging, and Rolling Reboot Detection

-slot SAN Director 12-blade slots: 14U rack-mountable

-post rack

-blade slots: 8U rack-mountable

to 31 in. rail, 18 in. to 24 in. rail, and airflow diversion rack

-post rack; mid-mount kit for the two-post rack

-to-door airflow; SN8000B 4-Slot SAN Director ships with 1U

Page

optical loopback,

-post rack; mid-

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

Technical Specific

ations

Width

SN8600B:

Rack

SN8000B:

17.22 in (43.74 cm)

Size

SN8000B 8-slot SAN Director

Height: 61.23 cm (24.11 in., 14U) Width: 43.74 cm (17.23 in.) Depth: 61.04 cm (24.04 in.)

SN8600B 4

Height: 34.45 cm (13.56 Width: 43.74 cm (17.23 in.) Depth: 61.04 cm (24.04 in.)

SN8600B 4

Height: 40.00 cm (15.75 in., 9U) Width: 43.74 cm (17.23 in.) Depth: 61.29 cm (24.09 in.)

SN8000B 8-slot SAN Director

Width:

43.74 cm (17.22 in)

Height:

61.24 cm (24.11 in, 14U)

Depth (without door):

61.19 cm (24.09 in)

Depth (with door):

73.20 cm (28.82 in)

SN8000B 4

Width:

43.74 cm (17.22 in)

Height:

35.00 cm (13.78 in, 8U) plus 4.37 cm exhaust shelf (1.72 in, 1U)

Depth without door:

61.19 cm (24.09 in)

Depth with door:

73.20 cm (28.82 in)

Weight

SN8600B 8-slot SAN Director

35.61 kg (78.5 lb) for chassis

145.8 kg (321.5 lb) for 384 fully populated

SN8600B 4-slot SAN Director

24.5 kg (54 lb) for chassis

68.95 kg (152.0 lb) for 192 fully populated

SN8000B 8-Slot SAN Director

103.50 kg (228.20 lb) fully populated

39.55 kg (82.20 lb) for chassis

SN8000B 4-Slot SAN Director

68.04 kg (150.00 lb) fully populated

25.26 kg (56.80 lb) for chassis

Environment

Temperature Operating

32° to 104° F (0° to 40° C )

Non-operating

-25° to 70° C (-13° to 158° F)

Humidity

Operating

SN8600B:

5% to 93% RH non with a maximum gradient of 10% per hour

-mountable in a standard 19-inch EIA cabinet

-slot SAN Director

in., 8U)

-slot SAN Director with airflow diversion rack-mount kit

-Slot SAN Director

-port configuration,

-condensing at 40°C (104°F)

Page

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

Technical Specific

ations

SN8000B:

5% to 85% non-condensing at 104° F (40° C)

Non-operating

SN8600B:

10% to 93% RH non

SN8000B:

10% to 93%

Altitude

Up to 3000 meters (9800 feet)

Shock

20 g, 6 ms, half sine

Vibration

Operating

SN8600B:

10 g, 11 ms, half sine wave

SN8000B:

0.5 g p-p, 5 to 500 to 5 Hz

Non-operating

SN8600B:

20 g, 11 ms, half sine wave

SN8000B:

2.0 g, 5 to 500 Hz

Heat Dissipation

SN8600B 8-slot SAN Director

384-port configuration: Typical: 8,836 BTU/hr; Max: 14,485 BTU/hr Power consumed: Typical: 2,589 W; Max: 4,244 W

NOTE:

redundancy.

SN8600B 4-slot SAN Director

192-port configuration: Typical: 4,696 BTU/hr; Max: 8,139 BTU/hr Power consumed: 1,376 W; Max: 2,385 W

NOTE:

redundancy.

SN8000B 8-Slot Chassis Min: 32 (no QSFP)

873 W, 2982 BTU/hr

Max: 384-port configuration (fully-loaded w/QSFPs) SN8000B 4-Slot Director

2242 W, 7654 BTU/hr

Min: 32-port configuration (no QSFP)

618 W, 2111 BTU/hr

Max: 192-port configuration (fully-loaded w/QSFPs), 1195 W

1195 W, 4078 BTU/hr

Power

SN8600B

Supported power range

Input voltage

Standard AC input: Range: 85 VAC to 264 VA Nominal: 100 VAC to 240 VAC Power 85 to 132 VAC: 1,450 W

-condensing at 70°C (158°F)

Input power is at 200 VAC with full PSU

Typical:

Input power is at 200 VAC with full PSU

-port configuration

C Auto-volt

Page

QuickSpecs

HPE StoreFabric B-series SAN Director Switch Family

Technical Specific

ations

180 to 264 VAC: 2,870 W

In-rush current

35 Amps maximum, peak

Frequency

50 Hz to 60 Hz (Nominal: 50 Hz to 60 Hz)

SN8000B

Supported power range

110-240 VAC, single phase

In-rush current

60A maximum, peak

Input frequency range

47-63 Hz

Power Supplies

Two power supplies included with each director

Output voltages (each):

48V at 20 amps 12V at 4 amps

Maximum output power:

2000 watts AC inrush current:

20A maximum, peak

Power Cables

The DC SAN Directors come with:

two 220V US power cords

2 C19-C20 220V PDU jumpers.

Certified maximum

Please Refer to SAN Design Guide at the following URL: http://www.hp.com/go/sandesignguide.

Page

QuickSpecs

HPE SN8000B and DC SAN Director Family

Summary of Changes

Page 39

Date

Version History

Action

Description of Change

03-Apr-2017

From Version 54 to 55

Changed

Added optics and cables along with minor content edits

13-Feb-2017

From Version 53 to 54

Changed

Cosmetic Update

16-Dec-2016

From Version 52 to 53

Changed

Added a 32Gb SFP+ SKU

28-Nov-2016

From Version 51 to 52

Changed

Added content for SN8600B 32Gb SAN Director

29-Jul-2016

From Version 50 to 51

Changed

Changes made to the Configuration Information section.

07-Jun-2016

From Version 49 to 50

Changed

Changes made throughout the QuickSpecs

08-April-2016

From Version 48 to 49

Changed

Changes made to the Services Sections

16-Feb-2016

From Version 47 to 48

Changed

Content Updated on the entire document

30-Mar-2015

From Version 46 to 47

Changed

Changes made throughout the QuickSpecs.

13-Feb-2015

From Version 45 to 46

Changed

Change the version to match Product Bulletin. It was not synched up

09-Feb-2015

From version 44 to 45

Added

Added the HPE StoreFabric B-series 4x16Gb Fibre Channel 2Km Inter-chassis Link QSFP Transceiver

14-Nov-2014

From Version 43 to 44

Changed

Changes made throughout the QuickSpecs.

3-Oct-2014

From Version 42 to 43

Changed

Changes made to the Configuration Information, Service and

21-Jul-2014

From Version 41 to 42

Changed

Changes were made in Overview, Product Highlights and Configuration Information sections.

10-Jun-2014

From Version 40 to 41

Changed

Carepack description updated on the Basic Care-Minimun

28-Feb-2014

From Version 39 to 40

Changed

Updated the following: Configuration Information Step 1, added

2/64" from the description for 325887-B21 and 325886-B21;

20-Dec-2013

From Version 38 to 39

Added

HPE B-series 16b Long Wave 25km Fibre Channel SFP+ 1 Pack to Fibre Channel Switches were added.

09-Dec-2013

From Version 37 to 38

Changed

Product descriptions were revised throughout Configuration

removed from Family Information

15-Oct-2013

From Version 36 to 37

Changed

Fabric Vision was added to Product Highlights

was removed from Family Information chart

30-Sep-2013

From Version 35 to 36

Changed

Optional Software was revised.

01-Apr-2013

From Version 34 to 35

Changed

Changes made to update Step 2 of the Configuration Information section.

25-Mar-2013

From Version 33 to 34

Changed

Changes made throughout document in sections What's New,

Specifications.

22-Feb-2013

From Version 32 to 33

Changed

Changes were made to Product Highlights Section as well as Configuration Information section.

Support and Product Highlights Sections.

recommended support

Updated some products highlights

Configuration Updates

Fabric Vision to description for QK710B, QK711B, AK857C, AR479B, Step 2 - added note to TC513A; removed "for Core

Information

HPE 8/40 SAN Switch and 8/40 SAN Switch Power Pack+ was

2408 FCoE CN Switch and 2408 FCoe CN Switch Power Pack+

Product Highlights, Configuration Information and Technical

QuickSpecs

HPE SN8000B and DC SAN Director Family

Summary of Changes

16-Nov-2012

From Version 29 to 32

Changed

Changes were made Configuration Information section.

14-Sep-2012

From Version 28 to 29

Changed

Changes were made in Overview, Product Highlights and Configuration Information sections.

13-Aug-2012

From Version 27 to 28

Changed

Changes made in Configuration Information.

22-Jun-2012

From Version 26 to 27

Changed

Changes made in Configuration Information.

16-May-2012

From Version 25 to 26

Changed

Updated the following: Product Highlights - removed "CUP" from

Options - updated NOTE for Fibre Channel Optical Transceivers

06-Apr-2012

From Version 24 to 25

Changed

Cabinet Support was revised.

26-Mar-2012

From Version 23 to 24

Changed

Changes made throughout the QuickSpecs.

02-Dec-2011

From Version 21 to 23

Changed

HPE Encryption FC Blade was revised in Additional Port Configurations.

14-Nov-2011

From Version 20 to 21

Changed

HPE 16GB Long Wave B-series 10km FC SFP+ 1 Pack was

3 in Configuration Information.

28-Oct-2011

From Version 19 to 20

Changed

Updated the following: Overview; What's New; DC SAN Director

from 3Tbps to 4Tbps

26-Sep-2011

From Version 18 to 19

Changed

SN8000B Performance, DC SAN Director Highlights, Cabinet

Specifications

22-Jul-2011

From Version 17 to 18

Changed

Note for HPE Encryption FC Blade was revised in Step 2.

20-Jun-2011

From Version 16 to 17

Changed

Changes were made throughout, including changing the title.

09-Jun-2011

From Version 15 to 16

Removed

Removed "StorageWorks" throughout the document.

18-Mar-2011

From Version 14 to 15

Changed

Part number for HPE StorageWorks DC04 SAN Director Switch Integrated Routing LTU in Step 2.

27-Sep-2010

From Version 13 to 14

Added

PremierFlex Cable was added to Step 3.

21-Jun-2010

From Version 12 to 13

Added

64-port 8Gb FC Blade provides the highest director port density

the FICON Accelerator Upgrade LTU name; updated NOTE for 10GbE and 10Gb FC Performance Upgrade; Configuration Information - Step 2 Additional Port Configurations - updated NOTE for 10GbE performance upgrade and removed one NOTE and update another for HPE Extension Blade FICON Accelerator Upgrade and updated NOTE for HPE FICON; Step3 - Additional

added and HPE LC-SC Optical Cables were removed from Step

Highlights; DC SAN Director Performance; SAN Scalability (typo); Web Tools; FICON Support (typo); ISL Trunking; SAN Network Advisor; SAN Network Advisor Enterprise and Professional+; HPE DC SAN Director 8 Inter-Chassis Link LTU; HPE B-series SAN Director FICON CUP Active License; 10GbE and 10Gb FC Performance Upgrade; Family Comparison TableAggregate device bandwidth for the SN6000B 16Gb FC Switches; Family Comparison Table-Hot plug, redundant power supplies for the SN8000G 8-Slot SAN Director; Configuration Information - Step 3-additional options; added Note; Technical Specifications - DC SAN Director Chassis Bandwidth changed

Support, Frame Filtering and ISL Trunking were revised in Product Highlights

Family Information was completely revised

Configuration Information was updated

DC SAN Director Performance was revised in Technical

on the market was added to Key Features and Benefits

FICON CUP and FICON Accelerator were added to FICON Support

Page

QuickSpecs

HPE SN8000B and DC SAN Director Family

Summary of Changes

HPE DC SAN Director Switch Multiprotocol Ext Blade FICON

Optional Cables

Changed

DC SAN Backbone Director was increased to 512 ports and

features

29-Mar-2010

From Version 11 to 12

Added

HPE Extension Blade FICON CUP Accelerator Upgrade and HPE

Fabric Manager Professional Plus were added to Management.

14-Sep-2009

From Version 10 to 11

Changed

Changes were made throughout the entire QuickSpecs, except

Information section.

20-Apr-2009

From Version 9 to 10

Changed

Revised the Warranty information for the DC SAN Backbone

02-Mar-2009

From Version 8 to 9

Added

Encryption throughout the QuickSpecs, excluding the Family

Changed

Warranty section of Service and Support, HPE Care Pack and 13-Feb-2009

From Version 7 to 8

Changed

Reformatted the Warranty section of the Service and Support, HPE Care Pack and Warranty Information.

26-Jan-2009

From Version 6 to 7

Changed

Changes were made throughout the entire QuickSpecs. Note the title has changed.

17-Nov-2008

From Version 5 to 6

Added

Support with M-Series M-EOS and B-Series FOS based SAN

CUP Accelerator Upgrade LTU was added to Optional Software

NOTE was added to HPE StorageWorks Encryption Blade Performance Upgrade

High Density Cables, LC-MiniSFP Cables and Recommended Patch Panels for the High Density Cables were added to

DC04 SAN Director was increased to 256 ports

Service and Support, HPE Care Pack, and Warranty Information was completely revised

1 Gb/s SAN Switches was removed

Remote Monitoring of entire data center via Instant Support Enterprise Edition (ISEE) was removed from High-availability

StorageWorks B-series DCFM Professional Plug Upgrade LTU were added throughout the QuickSpecs,s NOTE was added to HPE StorageWorks 10/24 Blade for DC SAN Directors, HPE StorageWorks Data Center Fabric Manager Enterprise and

in the Service and Support, HPE Care Pack and Warranty

Director in the Service and Support, HPE Care Pack and Warranty Information section

Completely revised the chart for Recommended Services and added a chart to Related Services in the Service and Support, HPE Care Pack and Warranty Information section

Updated the Part number for the HPE StorageWorks DC SAN Backbone Director Power Pack + in Step 1 and part numbers throughout Step 2, excluding the Encryption FC Blade and Software in the Configuration Information section

Information and Technical Specifications sections.

Warranty Information and corrected some spacing issues in the Technical Specifications section.

Fabrics to the Overview section

Page

QuickSpecs

HPE SN8000B and DC SAN Director Family

Summary of Changes

Enhanced Group Management and Data Center Fabric Manager

Transceivers in Step 3 of the Configuration Information section

01-Aug-2008

From Version 4 to 5

Changed

Minor formatting changes occurred in Steps 1 and 3 of the Configuration Information section.

25-Jul-2008

From Version 3 to 4

Added

HPE B-Series SAN Backbone Director Integrated Routing LTU

2 of the Configuration Information section.

11-Jul-2008

From Version 2 to 3

Added

1 2Gb USB Device to Steps 1 and 3 in the Configuration Information section.

Changed

Family Information Charts were rewritten and Optical

Information section.

11-Apr-2008

From Version 1 to 2

Changed

Changes were made in the Overview and Configuration Information section.

The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are se such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions con

c04154441

throughout the QuickSpecs

HPE 8Gb Long Wave B-Series 10Km FC SFP +1 Pack to Optical

to Optional Software in the Product Highlights section and Step

Transceivers were updated in Step 3 of the Configuration

t forth in the express warranty statements accompanying

tained herein.

- 12993 - Worldwide - V55 – 03-April-2017

Page

HPE QK711B Getting Started Guide

Specifications and Main Features

Frequently Asked Questions

User Manual

Overview

HPE Support Services and Warranty Information

Configuration Information

Technical Specifications

Summary of Changes